Hack.intosh
-
Posts
47 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by Hack.intosh
-
-
Tried all of the following CML ids 0x9bc4, 0x9bc5 & 0x9bc8 but it didn't make a difference as suggested.
boot arg igfxonln=1 didn't make a difference either.
EFI attached for reference.
-
Newly installed Hackintosh (Ventura 13.5 with Opencore 0.9.4) with everything running well except that audio (Intel Kabylake HDMI) only works when HDMI cable is disconnected and reconnected into HDMI port. If it's not disconnected... audio (Intel Kabylake HDMI) is not shown in Hackintool and therefor no audio. Can anyone help with this issue to get the audio working without having to disconnect and reconnect the HDMI?
Have tried patching thru Hackintool without success.
Specs of my Gigabyte Brix GB-BRi5H-10210 mini computer:
- CPU: i5-10210U 4.2GHz
- Graphics: UHD Graphics 620
- RAM: 16GB DDR4 2666MHz
- LAN: Intel I219v GigabitEthernet
- Wifi: Broadcom BCM9435Z
- Audio: Realtek ALC255
-
I've finally have managed to get full GA working with 0x05001C59 and external monitor using type-c to HDMI port. However, Built-in display is blank - I am still able to change brightness with fn keys and sys info show the builtin display is detecting resolution at 28" (1600x1200). Still not having any luck with the connector type...
15" Surface Book 2 15” PixelSense™ Display
Screen: 15” PixelSense™ Display
Resolution: 3240 x 2160, (260 PPI)
10 point multi-touch G5
Aspect ratio: 3:2
Contrast ratio: 1600:1SB15 04.ioregopencore-2022-11-01-021006.txt.zip
-
1
-
-
There is non option to set DVMT in the bios. I've also tried without fbmem and stolenmem patches. I've also tried the above as you've mention AND with framebuffer-con0-type | 02000000 | DATA. All without success.
-
Tried this and a few others but didn't work.
-
This is not a common issue I’ve come across. Could you please help me identify the type of connector with a particular guide or reference point? I can work out the rest
-
edit - found a guide and managed to do as you requested. Learnt something new! Anyways, here's the new IOREG attached using my EDID.
-
I’ve set up screen sharing using an invalid fake gpu as suggested, tested and working with the fake gpu then had device-id removed altogether afterwards. I do have another MacBook to remote into the surface book but the it won’t connect as you would’ve guess. Not familiar with injecting my screen’s EDID. I’ve googled but came up with unrelated results. Do you have a link of sorts? Also, is this method going to resolved this issue?
-
Thanks for pointing out the fake gpu, understandable. I tried all three but all with the same outcome. It will boot to the apple logo 1/3 of the way, the logo goes bright for a second before going blank to a blank backlit display shortly restarting - repeat. IOReg attached. Seems to be 1x display detected
-
I have tried all three with -igfxdvmt (can't set dvmt in bios) and without igfx---- args. All three do not boot, with results in a restart loop.
initially faking iGPU device 0x9016 was a typo when editing device-id but that resulted in the Surface Book actually booting in macOS (to my surprise). I'm under the impression, the issue lays in either the device-id, frame buffers or args? I've tried many combinations prior to posting but with device-id removed - it will boot without graphics acceleration.
-
without - doesn't boot in macOS but keeps dragging with applekeystore
with - doesn't boot - goes blank and restarts.
no luck.
-
CPU - Intel i7-8650U
GPU - Intel UHD 620 / Disabled dGPU in bios
RAM - SK Hynix 16GB 1867MHz
Network - 88W8897 Avastar 802.11ac Wireless
Audio - ALC298
Input - HID Keyboard/Mouse
SMBIOS - MacBookPro15,2
OS - Monterey 12.5
When the device-id is '16900000' dummy number. Graphics showing as 'Intel UHD 620 26 MB'
Cannot boot into macOS when using '16590000' from Dortania Guide.
I have also tried AAPL,ig-platform-ids 00001B59 (current), 00001659, 0000C087 without success.
Tackling the graphics issue first but there are other issues such as wifi, bluetooth, sound, dual battery which I'll create another post for unless I manage to figure it out first. Any help would be much appreciated. Thanks
-
Will do. Thanks mate
-
Nothing in the bios related to my trackpad either.
I've switched USB kext from hacking tool to USBToolmap and UTBMap as I've read up its more accurate. ALPS Trackpad is now located in HS01. Still the same issue tho... doesn't work.
-
I agree with you. What's in the bios that I should be looking for? I gotta head into work now. Won't be able to debug till after. Thanks for your help thus far
-
1
-
-
still the same issue. Trackpad not working
-
MacBook Pro IOREG 3.ioregModify as in change the priority order? if so, done.
Disabled OCworkdell
Trackpad still not working
-
yeah I noticed that too but my trackpad doesn't work. Not sure if its because its a detachable keyboard? It doesn't make sense to me either
-
-
-
-
It’s not working tho. It’s either one or the other but not both unfortunately.
It could related to GPIO pinning but I’m not technical enough to figure this out on my own
-
I didn’t add it but should have includes my post but I have tried loading with AlpsHID. Still the same issue. I placed the kext immediately after i2cHID with the same outcome.
-
Trying to do the finishing touches on an otherwise working build for my Dell 5290
Audio - ALC255 using Alcid=30
ALPS Trackpad detected as internal USB
- ALPS Trackpad (HS02) does not work when VoodooI2CHID.kext is enabled. However, Touchscreen works as intended with Apple gestures. (I2C1@15,1)
- Trackpad works when VoodooI2CHID.kext is disabled. However, Touchscreen does not work. Also, Cannot get Apple trackpad gestures to work.
Can't get them both working together
- Sound works (Speaker OUT, internal Mic IN) however, external LINE IN Mic does not work. Have tried using ALCPlugfix without success other than that it helped detect my headphones faster when inserted and ejected from audio combo jack. Was very delayed before.
I've tried as much as I can to figure this out but would like some assistance wherever possible. Please help or link me to proper guides that I may not have come across. Thanks
Audio over HDMI not initially working. Only after D/C and Reconnecting HDMI Cable
in Intel-based Systems
Posted
The flag was created from hackintool and I’ve booted the hackintosh with and without the flags. Audio is only detected after ejecting and reconnecting the HDMI. The only time audio isn’t detected at all is when I use AAPL,ig-platform-Id 07009B3E and 0000A53E which is recommended for NUCs. However, the laptop platform ids do give me audio after HDMI is reconnected. Weird. It should be an easy fix but apparently not. Everything in my efi seems to be correct.