Slice

Try? I think it would be initial value.

I confirm this driver is not good. VoodooPS2Controller prevents computer from sleep/wake. With ApplePS2Controller sleep/wake fine. Keyboard driver needs some improvements with some unused keys. Namely with my D420 I see a key "> Trackpad driver needs many improvements: 1. Now buttons is not working. 2. Dragging should be switched on/off. 3. DragLock implementation? Dunno how. 4. Scroll sensitivity. It was set at minimum in the driver but it very high. An idea is to drop events 1,2,3,4 and perform event 5. 5. Trackstick is not working. Any propositions? Help me, please. I am not clear how Dragging and DragLock should work. 1. If I check "Dragging" then... 2. If I check "DragLock" then... 3. If both NO then ...

I have two reports that very bad for me "with your bootloader the computer can't sleep while with trunk yes". I really loose sleep capability and perform tests why. I deleted all modules except modules: GUI.dylib klibc.dylib Memory.dylib Resolution.dylib All others is not needed. Then I change back from VoodooPS2 to ApplePS2. Now sleep/wake works! Then I replace IOPCIFamily with v263 and have fully working system after wake So I didn't confirm that my bootloader has something bad for sleep. It has no relation to the problem.

I found something bad/strange in your ioreg Apple Built In SDXC Reader Media Please, remove AppleSDXC driver and try again.

History.The vanilla driver is not good for most non-Apple laptops. Why? Reading documentation on PCCard/PCMCIA I found that PrimaryBus/SecondaryBus/SubordinaryBus of CardBus bridge should be assigned by external driver of OS. Namely IOPCIFamily. This tuning was in Apple's driver v1.7 but since 2.x version the CardBus support is dropped by Apple. So why Chun-Nan and me made our versions of IOPCIFamily with Bus renumerations algo. Chun-Nan abandon the ship at Leo era and now only my version can works in Snow. My algo is verified in Tiger with Samsung P29 and gave me working PCCard with vanilla IOPCCardFamily.kext. I also have some grateful reports from other users of Tiger. Later I remake the same way Leo's driver and Snow's. They work as is but I never checked PCCard because of lack of hardware. Now in Snow. I created IOPCIFamily v263 for Snow 10.6.0. It was good. Only with it I got USB working! Side effect. I also have report from other users with good influence of the kext. Now I have the hardware, namely Dell D420 with PCCard slot with Snow installed and.... PCCard is not working. I see good messages from IOPCIFamily in kernel.log It means that CardBridge is properly initialized. Looks fine, nonetheless PCCard is not working. Version 263 was created from 113 Apple's sources. Since 10.6.5 Apple rewrote the driver and publish 115 sources. I made IOPCIFamily v265 based on 115 sources. After some testing I found it is not good. Wake after sleep with 265: Feb 22 13:54:36 sergey kernel[0]: System Sleep Feb 22 13:54:45 sergey kernel[0]: pci restore waited for GIGE (8204) fail Feb 22 13:54:45 sergey kernel[0]: pci restore waited for ARPT (8215) fail Feb 22 13:54:45 sergey kernel[0]: Wake reason = PWRB LID Feb 22 13:54:45 sergey kernel[0]: System Wake Feb 22 13:54:45 sergey kernel[0]: USB (EHCI):Port 1 on bus 0xfa connected or disconnected: portSC(0x301002) Feb 22 13:54:45 sergey kernel[0]: The USB device Laptop Integrated Webcam (Port 1 of Hub at 0xfa000000) may have caused a wake by being disconnected Feb 22 13:54:45 sergey kernel[0]: no card! Feb 22 13:54:47: --- last message repeated 1 time --- Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: 00000000,24907000 sky2 - HardwareNotResponding, marking offline Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: error - FATAL: SkGeStopPort() does not terminate (Rx) Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: error - SkGeInitPort(): invalid Queue Size specified Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: error - SkGeInitPort(): Queue Size illegal configured Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: SkGeInitPort A failed. Feb 22 13:54:45 sergey kernel[0]: AppleYukon2: 00000000,00000000 sk98nif - enable - IFEnable failed And ethernet not working Then I revert back to IOPCIFamily 263 Feb 22 14:03:16 sergey kernel[0]: System Sleep Feb 22 14:03:28 sergey kernel[0]: Wake reason = PWRB LID Feb 22 14:03:28 sergey kernel[0]: System Wake Feb 22 14:03:28 sergey kernel[0]: USB (EHCI):Port 1 on bus 0xfa connected or disconnected: portSC(0x301002) Feb 22 14:03:28 sergey kernel[0]: The USB device Laptop Integrated Webcam (Port 1 of Hub at 0xfa000000) may have caused a wake by being disconnected Feb 22 14:03:30 MacBook kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [78ed,6c00,0de1,0000,45e1,0000] Fine! It means that final version of IOPCIFamily is not yet created. Here I propose the most working version IOPCIFamily.kext-v263.zip I hope on more testing from other hardware configuration and will create the best version.

Thank you for the good reports. There are some new informations for me. As I see from these logs DMA is no go. Take me also your ioreg with VoodooSDHC.kext started. ioreg -lxw0 >ioregROBI62.txt Tell me, please, how can you insert two cards? Do you have two slots?

Fn+z has no influence on Inspiron.

Thanks, but I dunno how to use this info. It is better to see kernel.log from OSX with my driver.

I asked to provide kernel.log information. And please attach pictures as png but not tiff. Yes, on D420 almost the same behavior. At Inspiron it just works, card inserted automatically mounted and I can read and write with a speed about 10Mb/s.

As well as any monitoring. My cooler became silent after Fn+Z but why? It is without I8kfan! How to revert? Now I start I8k and look 6300rpm Fn+Z -> 5400rpm, but the temperature is high so, after few seconds 6300rpm again. Secret Dell's trick? Will check on 1525 tomorrow.

No problem. What I should to provide?

Yes, I also notice it heated CPU. So I am not using it at regular base. Some day I rewrite this driver but it is not nearest future.

Try this version. It works on Dell Inspiron 1525 with correct sleep/wake. VoodooSDHC.kext.zip This is debug version with many messages in kernel.log. Report, please, with this messages. It seems Inspiron has more recent SDController rev2.2 that works with this driver while D420 has rev1.8 that is quirky and some workaround in driver needed. I still not found the trick in any Linux/FreeBSD/Nintendo sources. Is there anybody can confirm that the SDCardReader works in Linux? I doubt.

Easy to check sergey:NewFolder slice$ iasl -ta dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20110211-32 [Feb 12 2011] Copyright (c) 2000 - 2011 Intel Corporation dsdt.dsl 4832: DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Error 4064 - Object does not exist ^ (DTGP) ASL Input: dsdt.dsl - 5986 lines, 210789 bytes, 1818 keywords Compilation complete. 1 Errors, 0 Warnings, 0 Remarks, 3 Optimizations sergey:NewFolder slice$ So the answer: NO, we need DTGP

Next problem. I compared PCI bus setting for working Dell 1525 and non-working Dell D420 PCI addr 1525 420 (00)=08221180 08221180 DeviceID the same (08)=08050122 08050118 kIOPCIConfigRevisionID (0c)=00804010 00804000 kIOPCIConfigCacheLineSize (3c)=00000212 00000312 kIOPCIConfigInterruptPin (b0)=00020004 00020000 (c0)=00003000 00000000 (f8)=002100c0 022000c3 The problem that I can't find information about this PCI addresses specific for Ricoh SDController. Can anybody find a datasheet for it?

My model is Ricoh R5L476, deviD=0x04761180. What about others?

Create /etc/rc.local The script will start with root acoount before login

I'm only one with one head so I can't make new bootloader until I make SD reader.

Results?

soon. But it is not happened yet. I think he catch bugs.

Hey all, I am a developer of drivers for MacOSX and my success is depended on good testing. I can test with Dell Inspiron 1525 and with Dell Latitude D420. In both cases it is my software configuration. At other hardware and at other software configuration there may be different results. So test please all my solutions and report as detailed as possible. For example I8kfan.kext 1. Download a driver. I always give you zip archive containing kext and may be something else mentioned separately. Unpack zip by any methods you know. Simplest way is double-click. By default it is in ~/Download/ folder . 2. All action with drivers should be performed from Terminal under root account. Launch /Applications/Utilities/Terminal.app by double click on it's icon. 3. Enter root account sudo -s Password: enter your password 4. Create /Test folder at the root of your hard drive. mkdir /Test 5. Copy the kext into this folder cp -r -v ~/Downloads/I8kfan.kext /Test 6. Set right permissions to the kext. chown -R root:wheel /Test/I8kfan.kext chmod -R 755 /Test/I8kfan.kext 7. Now we should launch Console application /Applications/Utilities/Console.app by double click on it's icon. In the opened windows you should click on Show Log List button. At the left column you must choose kernel.log. See screenshot. Move the screen so you can see both the Terminal window and Console window simultaneously. 8. Return to Terminal and start the driver: kextutil -v /Test/I8kfan.kext 9. You see messages in terminal windows AND messages in Console. bash-3.2# kextutil -v /Test/I8kfan.kext/ /Test/I8kfan.kext appears to be loadable (not including linkage for on-disk libraries). Loading /Test/I8kfan.kext. /Test/I8kfan.kext successfully loaded (or already loaded). bash-3.2# 10. If the driver started then you can start related application to see what it can show. 11. If Kernel Panic is happened then don't give up, please. Restart computer in Single User Mode. Type in this mode the same command kextutil -v /Test/I8kfan.kext In this case you may see more messages before KP that you can report me. If you are interesting in a driver works for you then please show me messages from Terminal, from Console, or make a photo if KP.

Here is my installation http://forum.osxlati...y-installation/ DSDT I uploaded at DSDT Reseach New kexts at KEXT Research VoodooSDHC is not working yet. ApplePS2Controller is buggy, will return to it soon. PCMCIA is not working with any kexts. Voodoo3945 is not working, wait for mercurysquad works. Sleep is not working now, since new PS2 installed. I8kfan works but I didn't place it at s/l/e. I will later to rewrite it after some testing if occured. It show me unreal temperature (+15) and twice RPM FAN, while on Inspiron all is good. Later I plan to create famesmc plugin based on this kext. I have good speedstep with two states: 800MHz and 1067MHz as it should be. But IntelCPUMonitor show me wrong voltage so it should be rewritten for Yonah CPU. I have no feedback about Merom CPU. Still many many works here. Where can I place instructions "How to test drivers?"?

If it is the trunk then no any changes since rev 654. Revision number increased due to other branches, especially Meklort.

I am at stage of tests so I can't say that my installation is the best. - my bootloader RC5m-721 with modules GraphicsEnabler.dylib, GUI.dylib, klibc.dylib, Memory.dylib, Resolution.dylib, USBFix.dylib - boot.plist: arch=i386 cpus=1 - smbios.plist for model MacBook1,1 - dsdt I uploaded - non-native kexts; IOPCIFamily, BCM5751, VoodooHDA, AppleACPIBatteryManager.kext, ACPIMonitor.kext, AppleACPIPS2Nub.kext, AppleHDADisabler.kext, ApplePS2Controller.kext, FakeSMC.kext, IntelCPUMonitor.kext all of them into s/l/e daemon seems to be useless. Only GUI needed. But if the GUI is not working then are you sure that kext is loaded? Did you ever see into kernel.log and system.log? SIRS, did you able to test anything?

Now my best DSDT for D420. Initial version from Mariusz. Corrections of constants from native DSDT. My corrections. Changes vs native: 1. DefinitionBlock ("DSDT.aml", "DSDT", 1, "Apple ", "MacBook ", 0x00010001) 2. OS identification Store (0x10, MIS3) 3. Method (DTGP, 5, NotSerialized) 4. Apple's naming convention: PWRB, ARPT, LPCB, IPIC, FRWR except AZALHDEF because I afraid of AppleHDA to be started. That's why I have no audio injection. 5. Waiking USB. Not sure in this patch. Method (_L03, 0, NotSerialized) { Notify (\_SB.PCI0.USB0, 0x02) Notify (\_SB.PWRB, 0x02) } 6. Wake up for Power Adapter as well as Battery. Device (AC) { Name (_HID, "ACPI0003") Name (_PRW, Package (0x02) { 0x16, 0x03 }) 7. Device (PNLF) 8. Exclude IO 0x20, 0xA0, 0x4D0 and IRQ0 from abstract device MB2 and add these addresses to IPIC. 9. Add a device FSAM for ACPImonitor to see CPU Heatsink temperature with iStat. Works not stable 10. Exclude IRQ from RTC and TMR. 11. Exclude devices SPKR, ECP. No drivers in OSX. 12. Add IRQ2 to IPIC (brightness problem). 13. Add IRQ 0,8,11 to HPET. IRQ0,8 for speedstep, IRQ11 for USB problem. 14. _DSM injections for all USB devices. 15. IOATAFamily panic patch. 16. Method UDMA same as origin but differ from Mariusz. 17. Device (SBUS) definition. Don't know but it really presents in the hardware. 18. _DSM injection for VID device. Dunno how many fields is obligatory and what is extra. 19. Exclude Device (DVI) - black screen problem. Do not change VID2 device. 20. _SUN unjection for PCI devices to see they in System Profiler 21. _DSM for Firewire. Can't check if it helps. 22. Exclude Device (CRD1) { Name (_ADR, 0x00010005) as non-existant at this address. 23. Definition for Device (CRD2) //SD Controller 0x0822 24. Device (ARPT) definitions. 25. Initial errors and warning corrections to make dsdt compilable. TODO: 1. As MacOSX always set GPIC=1 then we can reduce DSDT by all PICx packages. Only APIx needed Method (_PRT, 0, NotSerialized) { Store (API0, Local0) If (LNot (GPIC)) { Store (PIC0, Local0) } Return (Local0) } 2. Sound cosmetics? 3. Sleep problem is still unresolved. 4. What about MECI implementation as did in Dell Inspiron 1530? 5. Still the question about SMBD. Not implemented for now. Method (_PTS, 1, NotSerialized) { SMI (0x8A, Arg0) // Store (One, SMBD) } 6. Where is FAN? Where is WiFi LED? dsdt-D420-v19-02-2011.zip