el_caboing
Members-
Posts
16 -
Joined
-
Last visited
el_caboing's Achievements
Private First Class (3/17)
0
Reputation
-
I used the config file on the d630 thread and still have the same issues, it will not bootup and crashes at the system uptime in nanoseconds. So when installing Clover I just install it, select the USB drive that i want it installed in and that's all? I choose no other options?
-
When installing Clover, do I just do a vanila install and not select anything or do I select certain things for the D830? I've found tutorials saying I should use legacy mode and tried that but that does not seem to work.
-
Do you have to use "kext-dev-mode=1" even if it's not the dev install? I have downloaded the latest Yosemite from the App store.
-
So I followed your tutorial finally was able to get the BaseSystem.dmg mapped and got the USB all taken care of. I deleted the Packages link, copied the one from the install, installed Clover added all my kexts from E/E and my dsdt.aml also into patched. booted up and still dies at the nanoseconds one. Clover still sees my D830 as a MacBook2,1 in smbios. Not sure what I did wrong.
-
el_caboing started following D830 nVidia - Yosemite
-
this is the error I get. Steves-MacBook-Pro:~ root# open /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg LSOpenURLsWithRole() failed with error -10810 for the file /Volumes/OS X Install ESD/BaseSystem.dmg. Steves-MacBook-Pro:~ root# id uid=0(root) gid=0(wheel) groups=0(wheel),1(daemon),2(kmem),3(sys),4(tty),5(operator),8(procview),9(procmod),12(everyone),20(staff),29(certusers),61(localaccounts),80(admin),33(_appstore),98(_lpadmin),100(_lpoperator),204(_developer),398(com.apple.access_screensharing),399(com.apple.access_ssh),401(com.apple.sharepoint.group.1) Steves-MacBook-Pro:~ root# ls -ld /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg -rw-r--r--@ 1 root admin 487175853 Nov 12 15:29 /Volumes/OS X Install ESD/BaseSystem.dmg
-
Ok I'll give yours another try. I open up the InstallESD.dmg but then when I run the "open" command I get error -600 so I get stuck there. Clover def thinks my d830 isn't a MacPro.
-
Ok, sorry to jump on this thread but I have just attempted to install Yosemite on my D830 with Clover and I am running into many issues. I have followed many different guides to get this going and none have seemed to work. I have followed the ones from IM that have you do the sudo /Application.... command to get it installed on the USB key and then installed Clover. I have to edit the smbios to reflect that I have a MacPro5,1 to even get it to start. Once it starts it goes for a while then crashes right after it says system uptime in nanoseconds. I have copied all my kext files from my Mavericks E/E folder to the 10.10 one on the usb key and also the dsdt.aml in the patched folder. I am at a loss. Have no idea what I am doing wrong. On a side note, is Clover really that much better than Chameleon? I haven't tried Chameleon with Yosemete so it might be just as frustrating. Any help would be great.
-
no go, my cpu still spikes up and everything lags....
-
I installed another version of fakesmc that fixed that problem but I am still getting jitters when trying to view videos. I tested with a youtube video and the load average jumped to 7 and that wasn't even full screen. I just now ran edp and see if that will help. retuned the fakesmc to the above values for my d830.
-
So I have a d830 with Nvidia graphics and performed the fakesmc edit and removed the appropriate kext files. I ran myfix full and I get a kernel panic every time I boot. If I boot with the -v -f flags I have no issues. Not sure what I did wrong.
-
So, I thought I would be a good guy and update my buddies d830 to Mavericks. The install went well, booted up no problem but the issue is he has no wifi. I searched and found this thread. Looking at my machine I have a BCM4311, wifi works well, looking at his machine he has a BCM4312 and no go. Is there anything out there that I can install to get the wifi going?
-
How does one do that? It's back up, strange thing is that if I boot of the HD the chameleon loader is not a GUI and it seems to hang that way. When I boot off the USB and select the HD it seems to come up.
-
Rebooted again and it worked this time. Not sure why but it did let me finish the install. Now to reboot, install EDP and hope all is good after that.
-
Ok, finally had a chance to install it yesterday. All seemed to go good until my first boot to the new os. I booted with -v got all the way to selecting my language, but unfortunately the scroll pad doesn't work and the usb mouse that I then tried to plug into it doesn't work. Any ideas?
-
Cool I'm at work right now so can't test til I get home. Sounds promissing. Thx.