Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by neverly1

  1. Actually I use this configuration: MacOS Sierra 10.12.2 Bootloader Clover version 3949 D830 with Nvidia NVS 140 CPU T9300 Penny as recommended MacBook Pro 7,1 which is Core2Duo model At the moment I see no reason to go back to MacBook Pro 5,2 USB working perfect
  2. Funny, now I enabled IDA again in the BIOS and the clock slippage is gone. Thank you.
  3. Hi, I change now my CPU to T9300 to be ready for Sierra. My machine D830, El captain, NVS140 Clock slippage is back again. I changed nothing else. Any more idea? Please help...
  4. Hi, I use a t9600 with my D830, 8GB RAM and EC. Almost perfect.
  5. It seems to be ok now. No clock slippage for 30 mins uptime. IDA was enabled (Intel Dynamic Acceleration). I disabled it. As explained here If you know what to look for Thanks again for your help.
  6. Hi, thank you for your help. I have a D830 with Bios A17 Chipset ist 965 (I think but not sure) My CPU is T7700, which should be a Merom CPU. I tried the VoodooTSCSync.kext. Still I have a Clock slipage which is about 4 mins for 30 min uptime.
  7. Hi, when I boot El Capitain with Clover Bootloader, the clock in OS X is late. This means, after boot the clock is ok, but over time the clock is always more delayed. I used the Clover files as recommended in Polyzargone's thread. Any idea?
  8. Thank you for your reply. I did a fresh installation with Yosemite and chameleon as a boot loader. Funny thing, temperatures are ok. Not as good as with the Mavericks installation. I use a newer FakeSMC version now, as HWMonitor did not work with the old version. But better than Yosemite and Clover. Confusing for me, what happened there.
  9. Hi, I have a D830 with two installations First Mavericks with Chameleon bootloader Second Yosemite with Clover bootloader I recognize a difference with speedstep. With Mavericks and Chameleon CPU temperatures are at 40 degree and the multiplier are at 3 normally. See picture. With Yosemite and Clover the temperatures are at 70 degree and the multiplier are minimum at 6. Where is the difference? Where can I adjust speedster? Any idea is welcome. Thanks and best regards neverly1
  10. Which version of the fakesmc do you use? Is there a smbios section in your CLOVER config.plist?
  11. Hi, thank you for your reply. I have installed Yosemite with CLOVER bootloader as you recommended. System is booting, During startup I have seen one error telling "FakeSMC C-states error". With HWMonitor/HWsensors I can not get any values. I assume there ist something wrong with FakeSMC or CLOVER/config.plist. Any idea what to check?
  12. Hello, I am just wondering if an upgrade from Mavericks to Yosemite with the public beta is possible. If yes, please let me know your experience. Cheers neverly1
  13. Hi Herve, thank you once again for your help. I tried to boot with -v option. I will attach a picture from that. After booting with the USB stick I could restore the old chameleon boot loader svn 2266. Now OS X boots again. There is still the question what went wrong with the new chameleon boot loader.
  14. Hello, today I installed an update of chameleon 2.2 svn 2380. After reboot OS X won't boot. It stops after the Apple logo. No animation is visible. Please help.
  15. Hallo, does anybody know know if 10.9.2 is save to install? Please inform Best regards
  16. Hi Herve, could you please attach here. Thank you
  17. Hi, thank you for your reply. Unfortunally, audio still is not working, even it does with this machine when I boot into windows. So I think there is no hw defect. I installed the VoodooHDA files with no effort. I have attached an output from system information which shows no audio installed. Today I have upgraded the BIOS from A15 to A16. Nothing changed. I have installed EDP 769 I think. @rosmaniac: This thread was a bit confusing for me. Can you please explain in more detail what to do and where to start. @Herve: Do you have any idea what to do and what to test to find out whats wrong? What about the options in EDP? Thank you for your help.
  18. Hi Herve, thank you for your reply. I tested both Voodoo HDA 2.7 and 2.8 through EDP. None of them worked. Is there any dependency to anything else? I will try your attachment and report. Thank you
  19. Hi, I have a D830 with nvidia graphic card. Everthing seems to work perfect except audio. I tried all different versions in EDP but no chance. Do you have an idea what to do or what to test? Thank you for your help
  20. Hi, you are genius man. Working like a charm. Thank you very much!
  21. Hi, yes you are right. I have attached a picture from booting Mavericks without safe option. Do you know whats wrong? Please help. Thank you and regards
  22. Hi, thank you for your reply. I have a D830 with nvidia NVS140. I installed Mavericks with myHack. I booted my installation in safe mode and run EDP-Tool. Also now it only starts in safe mode. How can I find out what to do? Please help
  23. Hi, my installation of Mavericks on my D830 only starts in safe mode. How can I find out whats to do? Please help.
  • Create New...