neverly1
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by neverly1
-
-
Funny, now I enabled IDA again in the BIOS and the clock slippage is gone.
Thank you.
-
Hi,
I change now my CPU to T9300 to be ready for Sierra.
My machine D830, El captain, NVS140
Clock slippage is back again.
I changed nothing else. Any more idea?
Please help...
-
Hi,
I use a t9600 with my D830, 8GB RAM and EC.
Almost perfect.
- 1
-
It seems to be ok now. No clock slippage for 30 mins uptime.
IDA was enabled (Intel Dynamic Acceleration). I disabled it.
As explained here
If you know what to look for
Thanks again for your help.
-
Hi, thank you for your help.
I have a D830 with Bios A17
Chipset ist 965 (I think but not sure)
My CPU is T7700, which should be a Merom CPU.
I tried the VoodooTSCSync.kext. Still I have a Clock slipage which is about 4 mins for 30 min uptime.
-
Hi,
when I boot El Capitain with Clover Bootloader, the clock in OS X is late.
This means, after boot the clock is ok, but over time the clock is always more delayed.
I used the Clover files as recommended in Polyzargone's thread.
Any idea?
-
Thank you for your reply.
I did a fresh installation with Yosemite and chameleon as a boot loader.
Funny thing, temperatures are ok. Not as good as with the Mavericks installation.
I use a newer FakeSMC version now, as HWMonitor did not work with the old version.
But better than Yosemite and Clover. Confusing for me, what happened there.
-
Hi,
I have a D830 with two installations
First Mavericks with Chameleon bootloader
Second Yosemite with Clover bootloader
I recognize a difference with speedstep.
With Mavericks and Chameleon CPU temperatures are at 40 degree and the multiplier are at 3 normally. See picture.
With Yosemite and Clover the temperatures are at 70 degree and the multiplier are minimum at 6.
Where is the difference? Where can I adjust speedster? Any idea is welcome.
Thanks and best regards
neverly1
-
Which version of the fakesmc do you use?
Is there a smbios section in your CLOVER config.plist?
-
Hi,
thank you for your reply. I have installed Yosemite with CLOVER bootloader as you recommended. System is booting,
During startup I have seen one error telling "FakeSMC C-states error".
With HWMonitor/HWsensors I can not get any values.
I assume there ist something wrong with FakeSMC or CLOVER/config.plist.
Any idea what to check?
-
Hello,
I am just wondering if an upgrade from Mavericks to Yosemite with the public beta is possible.
If yes, please let me know your experience.
Cheers
neverly1
-
Hi Herve,
thank you once again for your help.
I tried to boot with -v option. I will attach a picture from that.
After booting with the USB stick I could restore the old chameleon boot loader svn 2266. Now OS X boots again.
There is still the question what went wrong with the new chameleon boot loader.
-
Hello,
today I installed an update of chameleon 2.2 svn 2380.
After reboot OS X won't boot. It stops after the Apple logo. No animation is visible.
Please help.
-
Hallo,
does anybody know know if 10.9.2 is save to install?
Please inform
Best regards
-
Hi Herve,
could you please attach here.
Thank you
-
Hi,
thank you for your reply.
Unfortunally, audio still is not working, even it does with this machine when I boot into windows.
So I think there is no hw defect.
I installed the VoodooHDA files with no effort.
I have attached an output from system information which shows no audio installed.
Today I have upgraded the BIOS from A15 to A16. Nothing changed.
I have installed EDP 769 I think.
@rosmaniac: This thread was a bit confusing for me.
Can you please explain in more detail what to do and where to start.@Herve: Do you have any idea what to do and what to test to find out whats wrong?
What about the options in EDP?
Thank you for your help.
-
Hi Herve,
thank you for your reply. I tested both Voodoo HDA 2.7 and 2.8 through EDP.
None of them worked. Is there any dependency to anything else?
I will try your attachment and report.
Thank you
-
Hi,
I have a D830 with nvidia graphic card.
Everthing seems to work perfect except audio.
I tried all different versions in EDP but no chance.
Do you have an idea what to do or what to test?
Thank you for your help
-
Hi,
you are genius man. Working like a charm.
Thank you very much!
-
-
-
Hi,
thank you for your reply.
I have a D830 with nvidia NVS140.
I installed Mavericks with myHack.
I booted my installation in safe mode and run EDP-Tool.
Also now it only starts in safe mode.
How can I find out what to do?
Please help
-
Hi,
my installation of Mavericks on my D830 only starts in safe mode.
How can I find out whats to do?
Please help.
-
Hi,
thank you, works now!
Complete set of files (Clover/Enoch) for El Capitan/Sierra
in D8xx
Posted
Actually I use this configuration:
MacOS Sierra 10.12.2
Bootloader Clover version 3949
D830 with Nvidia NVS 140
CPU T9300 Penny as recommended
MacBook Pro 7,1 which is Core2Duo model
At the moment I see no reason to go back to MacBook Pro 5,2
USB working perfect