seb43654

Hi sorry i forgot to mention this in the tutorial I wrote becuase I thaught it was easy. Mountain Lion is now only available for download, you cannot get a CD. Purchase it off the apple website (or by other means, your choice). You will then need access to a mac (snow leopard or higher) to create your bootable USB drive. There is no point making a bootable DVD as often you will need to tweak the contents of the drive to get it working. If you are completely stuck without a mac, you can use virtualisation software to run mac inside windows or linux. Good luck!

Merry Christmas! Hope everyone has a good one!

Yes, this bootpack is specifically made and tested by me for the Nvidia model.I would be surprised if it worked on the intel model. If you try Mountain Lion in the intel model, you will have no quartz extreme, graphics aceleration, and you will be stuck at 1024x768 resolution. I strongly recommend using Lion, as it works perfectly, and Mountain Lion isnt much better than Lion. Good Luck

Hi, I purchased a brand new ocz vertex 2 60gb sad about 3 months ago. Worked fine until today. I left the laptop (D630) on sleep for only about half a day, and when I woke up, the ssd would not 'wake' either it had froze. I powered off, and on again. SSD is now not recognisable by bios or ANYTHING. Tried all OCZ toolbox. SSD is completely bricked. Its a firmware bug known as 'wake from sleep' NEVER BUY A VERTEX 2 SSD! Hope this advice helped - any one else experienced this? Seb

Hi, I have a D630 with OS X Mountain Lion installed on a 60GB OCZ Vertex SSD, and a 250GB HDD in the place of my DVD Drive which holds my home folder and documents. I have seen the tutorials on creating a fusion drive for macs that dont have it built in. Would it be a good idea to create a fusion drive on my D630 and do you think there would be any significant speed boost or advantage? If I were to try it out, I would report back the results on here to let everyone know if it is worth it. I have seen videos showing the fusion drive is faster booting than only an ssd on its own? Thanks, Seb

It is definetly 8GB for version A17 bios, and in my D630 I have a OCZ Vertex 2 in my primary sata bay, and I swapped out the DVD drive for a 250GB 5400RPM HDD which has my home folder on. Hope this helps, Seb

The firewire port definitely works, I dont think the PCMCIA one works though - generally if you can see it in system profiler, its not picked up. Seb

My D630 rebuilds the kext cache every time it boots, and it refuses to shut down if it is doing it. It takes about 5/10 minutes to do, and puts the CPU at 90-100% load... Any solutions? Use Kernel Cache is set to YES. Seb

The exact same happens on my laptop - bluetooth doesn't work after waking from sleep (D630 Nvidia, Mountain Lion). I used the predefined option in EDP, but didnt apply the hibernation fix (I just installed sleep enabler.kext) What does the hibernation fix do? Seb

Hi, Glad you found the guide good! Yes due to the intel graphics which requires a 32-bit kext and ML is 64-bit only so it wont work. Lion works just fine, and I honestly dont really use any of the new features in ML, I just like always being completely up-to-date Seb

Make sure you have the correct bios settings, and have applied the correct bootpack onto your installation media. Seb

I dont completely understand - when you boot up what the first thing you get to? 1: Is it the windows boot manager 2: Or is it the chameleon bootloader If its number one: First go into windows startup recovery, and reinstall the windows bootloader Boot into windows and set system reserved as the active partition (its the one that has the bootloader on) Download easy bcd and add a mac os x boot entry to the bootloader startup screen If it is number two (more likely) Boot into OSX ML with your USB stick, and install champlist Run it on your partition with OS X/EFI and re-install chameleon with the latest one With champlist, browse to your EFI partition and check it is bootable [has boot file and extra folder] make sure your info.plist settings are correct try and boot ML normally. Hope this helped, good luck! Seb

And I also noticed every time I boot up my D630, kextcache process takes about 99% cpu regenerating kext caches. Even if I havent changed the kext cache - it gets quite annoying! Seb

Thats what I was just saying - it works otb, no additional kext required, the kext comes with OS X as its officially supported. Seb

Which wifi card have you got? Some Dell's come with intel wifi cards rather than dell ones, and the intel ones dont work with OS X. Seb