poldas

I have 2 DELL D430 and I've checked adapter on 2 laptops, so i think that we can rule out ribbon cable. I think that problem with recognize device in BIOS couldn't be partition scheme. So it have to be incompatible mSATA disk which works properly in computer without adapter - I tested it

I bought next mSATA to ZIF adapter but is the same situation, my DELL D430 doesn't recognize disk in first start... I can't check another disk because I don't have second...

BIOS batterry is OK because other settings are stored

I have the leastes BIOS - A09, mSATA disk is new so I think it coulde be a problem with mSATA to ZIF adapter

I think that it isn't the problem with cable because disk is present, but never after start the laptop. After press power button BIOS doesn't see the disk, I have to do "soft restart" ctrl+alt+delete and then disk is visible and OS starting. I can do reboot and still everything is good, but when I power off my laptop, on the next run BIOS can't see it

Hi, I bought mSATA to ZIF adapter for my DELL D430 but BIOS has a problem with recognizing the disk. When I power on the laptop on the screen appeared information: "No bootable devices..." (picture is below) . I have to go to the BIOS and exit, next disk is visible and system starts. If I do reboot everything is ok OS starts again, but if I switch off the laptop I see again screen: "No bootable..." I have disk Intel mSATA 80 GB Have you ever seen similar issue? What do you think it is the problem with mSATA to ZIF adapter?

Hi I'm thinking about buying DELL E6500 with NVIDIA Quadro NVS 160M 512MB Is it a good choice for Mountain Lion? Do Wi-Fi card and camera work good? Thank you for answer

saguado thank you for help, but I don't know how roll back... Can you write how can I replace new files?

Where do I find AppleACPIPlatform.kext and IOPCIFamily.kext which should be remove?

I've repaired permissions. Networks cards still don't work

I've instaled combo update 10.6.8 and problem is still the same. Where do I find disk utility?

Of course, still network is disable. System is slow and very often doesn't power off

Sorry but I still don't know what should I do to recovery my wi-fi and ethernet cards after update Mac OS X to 10.6.8. I have DELL D430

How can I do this?

I've instaled EDP 1.8 I didn't change wifi kexts.

Hi Yesterday I had updated OS X to 10.6.8 after restart i lost wi-fi, ethernet. Do you have any ideas? poldas

If I rebrand my card Will I switch ON Wi-Fi in Mac OS X?

One question. Will my rebranding Wi-Fi card work in Windows?

It isn't. I thought that rebranding wasn't necessary

I lost my Wi-Fi (Broadcom 94311), i can't switch card... It could have hapened after I put my Dell to doc-station, Mac OS X was crashed and I had to make hard reset Thank you for help

Everything is clear. Thank you.

Hi I've installed Mac OS 10.6.7 and EDP 1.7, everything worked ok but in 32-bit mode. I've changed com.apple.boot.plist from <key>Default Partition</key> <string>hd(0,2)</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>1280x800x32</string> <key>Hide Partition</key> <string>hd(0,4)</string> <key>Instant Menu</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>pmVersion=21</string> <key>SystemType</key> <string>2</string> <key>Theme</key> <string>Bullet</string> <key>Timeout</key> <string>4</string> <key>USBBusFix</key> <string>Yes</string> <key>arch</key> <string>i386</string> to (crc-error404 thank you for suggestion) <key>Default Partition</key> <string>hd(0,2)</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>1280x800x32</string> <key>Hide Partition</key> <string>hd(0,4)</string> <key>Instant Menu</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>arch=x86_64 pmVersion=21</string> <key>SystemType</key> <string>2</string> <key>Theme</key> <string>Bullet</string> <key>Timeout</key> <string>4</string> <key>USBBusFix</key> <string>Yes</string> System started in 64-bit mode but without Ethernet and with blurred screen. I've installed again EDP 1.7, after reboot system didn't wake up (Black screen with: Switch off and start again...)

How i should change com.apple.boot.plist to boot Mac OS in 64-bit mode? <key>Default Partition</key> <string>hd(0,2)</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>Graphics Mode</key> <string>1280x800x32</string> <key>Hide Partition</key> <string>hd(0,4)</string> <key>Instant Menu</key> <string>Yes</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>pmVersion=21</string> <key>SystemType</key> <string>2</string> <key>Theme</key> <string>Bullet</string> <key>Timeout</key> <string>4</string> <key>USBBusFix</key> <string>Yes</string> <key>arch</key> <string>i386</string>

Thank you Leon. I installed Mac OS X, then Chameleon 2.0 RC5 and EDP 1.7 My Wi-Fi and web browsers work good, but sleep doesn't work... What should I do to enable sleep mode? Should I change my oryginal BIOS firmware?

I've read wiki guide... Now I don't have free 8 GB USB pen, can I use D620SLV1.iso and clean Mac OS X 10.6.0 DVD?