Jump to content

D630 and Snow Leopard


dc13ster2

Recommended Posts

Hello, just sorry for my english, the problem is the following, y I have Dell D610, I installed it on Mac OS 10.5.6, so these three requirements I satisfies,

Requirements:

1. 8gb USB pen

2. OSX SL 10.6.0 image

3. a working OSX machine

and is on her wish to prepare for the installation of Dell D630, I downloaded from your site EDP 1.9.2 ,bootpacks here http://www.osxlatitude.com/supported-models/ grafic INTEL i have X3100,and Mac OS retail 10.6.3

I attach photos on the screen with the manipulations we performed.

after picture 10 i can not pass ,like it freeze the cameleon,What am I doing wrong?

post-3562-098823500 1327087693.png

post-3562-080891100 1327087709.png

post-3562-078425000 1327087720.png

post-3562-061682000 1327087731.png

post-3562-040518300 1327087747.png

post-3562-028798800 1327087760.png

post-3562-028532700 1327087772.png

post-3562-014889400 1327087784.png

post-3562-008514100 1327087796.png

post-3562-054635100 1327087807.png

Link to comment
Share on other sites

i do not think that that version of chameleon can be installed using "leopard"

i install that version of chameleon on 10.5.6 and it's work, and very interesting i install that version of chameleon and on my USB Flash but before i restore the Mac Retail, and after that i restore the mac on usb, copy the extra folder,EDP, -restart notebook -boot from USB Stick,-Boot................aplle HDD work .....but :huh: ............ this message appears foto

post-3562-077311400 1327481201.jpg

Link to comment
Share on other sites

I installed iFail S3 V2, and the same problem- message, maybe it's some little shade, I would like some more precision, with bootloader D630 intel is clear, with EDP also, what version of Chameleon to use better?, ok as are on stage (with patience I stand well, every time I install iFail for data handling is not too great, but I have no choice, I do not give up)

USB

1.Formate a GUID partition

2. mac retail restore

3. install chameleon (Version???)

4.transfer unzipped EDP ​the USB

5 transfer extra folder on the USB

 

6 ....... restart, boot from USB stick, and appears ---please turn off

 

not too clear what sense is the transfer EDP to USB bottles can be stored on a partition on the HDD anyway EDP must be installed on the Mac hard drive,why should I copy to USB (not understand must be installed on USB this EPD or not?? or only after installing Mac on HDD)

 

extra folder I deleted the old one on USB and I replaced with that of the bootpacks.

forgive me, maybe I do not understand too well, can anyone make some screens how to do the procedure with USB, better to see once than to hear 100 times

post-3562-008682800 1327496682.png

post-3562-095286600 1327496702.png

post-3562-060853700 1327496743.png

post-3562-032244600 1327496842.png

Link to comment
Share on other sites

  • Administrators

you use the boot pack extra folder from the wiki on the usb pen. you install edp to the working mac os.

if your using the 801 chameleon then you have to rename org.chameleon.Boot.plist to the original name of com.apple.boot.plist

chameleon changed the naming convention for 2.1-svn editions to the org.

Link to comment
Share on other sites

you use the boot pack extra folder from the wiki on the usb pen. you install edp to the working mac os.

if your using the 801 chameleon then you have to rename org.chameleon.Boot.plist to the original name of com.apple.boot.plist

chameleon changed the naming convention for 2.1-svn editions to the org.

I finally found what the problem was, wi-fi adapter,and most importantly when i boot in verbose mode -v Mac OS write in KP about Airport issue, and i physically removed completely the wi fi card, now it's ok -----boot ok, that mesage now does not appear more and boot goes on, right now looking for a portable HDD for that to throw off all of my information and then start the installation, and more even better to use myhack to create a bootable USB. thanks to all

Link to comment
Share on other sites

hello, i have some problem whit install Windows XP i mean dual boot SL and XP, whit sound i resolve problem and resolution same help this ( https://osxlatitude.com/index.php?/topic/600-d630-half-screen-blank/page__p__4145__hl__1440x900__fromsearch__1#entry4145)

but whit this dual boot I'm tired method described by Andy to me does not work https://osxlatitude.com/index.php?/topic/853-a-suggestion-to-wiki-masters/page__pid__6729#entry6729

 

Who can help me?

Link to comment
Share on other sites

Who can help me?

whit Windows 7 works perfectly with Windows XP does not want, when put xp disc and give it to copy files and install it, after my first restart appears next message WINDOWS COULD NOT START BECAUSE THEFOLLOWING FILE IS MISSING <WINDOWS ROOT>\SYSTEM32\HAL.DLL PLEASE RE-INSTALL A COPY OF THE ABOVE FILE

I followed the instructions here

http://tonycrapx86.blogspot.com/2009/11/dual-boot-windows-7-and-os-x-snow.html

What to do?

Link to comment
Share on other sites

×
×
  • Create New...