A Bc Posted August 7, 2018 Share Posted August 7, 2018 Hi. The following are not working: Ethernet, Wi-Fi (DW1560), trackpad, keyboard, brightness control, probably others as well. Putting VoodooI2C and VoodooI2CHID either in /L/E or E/C/K/O results in KP. No photo for the KP but a useful message was something along the lines of "VoodooGPIO: SunrisePoint-LP: Failed to get GPIO interrupt". Attached debug folder, please let me know if I should post full system specs. Thank you for any help. debug_6969.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 7, 2018 Moderators Share Posted August 7, 2018 Will most likely need to re-patch your files if you have different version of BIOS and settings. Boot to Clover, press F4. Compress and attach the Clover folder for review KP when adding the Voodoo kext is a sign that the Apple IC2 kexts are not disabled. I guess the disabler is not working, so will need to manually remove these kexts from /S/L/E AppleHPM AppleIntelLpssI2C AppleIntelLpssI2CController Don't forget to repair permissions and rebuild cache Link to comment Share on other sites More sharing options...
A Bc Posted August 7, 2018 Author Share Posted August 7, 2018 Attached, thank you again. I will be testing removing those kexts as soon as possible. CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 8, 2018 Moderators Share Posted August 8, 2018 Try this, replace into /EFI/Clover 5480_ABc.zip Link to comment Share on other sites More sharing options...
A Bc Posted August 8, 2018 Author Share Posted August 8, 2018 Wi-Fi, Bluetooth, Ethernet, trackpad, keyboard, brightness control now working, tested also after sleep. Did not yet remove the Apple* kexts nor did I add VoodooI2C to any path, should I go ahead and do that? Sound is still not working (on the laptop speakers - it works over Bluetooth). Attached debug and CLOVER folder. Edit: for sound, DPCIManager shows a CM238 HD Audio Controller. Hope it helps. CLOVER.zip debug_9315.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted August 8, 2018 Moderators Share Posted August 8, 2018 post screenshot of Status with DPCIManager Link to comment Share on other sites More sharing options...
A Bc Posted August 12, 2018 Author Share Posted August 12, 2018 Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 12, 2018 Administrators Share Posted August 12, 2018 No sign of codec... Try and install VoodooHDA + AppleHDADisabler, then look again in DPCIManager. Link to comment Share on other sites More sharing options...
A Bc Posted August 12, 2018 Author Share Posted August 12, 2018 Thank you very much. Installed 2.9.0-Clover-V12 in UEFI mode, sound works well now (seems it did not need to install AppleHDADisabler as well). 3.5 mm jack also works but it has quite a bit of hiss (tested with Sennheiser HD 518). Can I turn down the amplifier on the sound card to make it disappear? Link to comment Share on other sites More sharing options...
A Bc Posted August 12, 2018 Author Share Posted August 12, 2018 Additionally, can you please help me fix a few less important issues I've found? I get a KP when connecting a display via HDMI. If I boot up the laptop with the HDMI already connected, the external display isn't detected. Applied AppleIntelKBLGraphicsFramebuffer patch, HDMI now works (tested with hotplug but without sound). The trackpad is detected as a mouse, so I don't have access to gestures. Text and other things on the laptop display are a bit too small. Can I somehow emulate HiDPI scaling on 1600x900? I hid the FileVault Prebooter option in Clover Configurator and tried booting from the normal Mac OS option. The OS booted normally but the mouse and keyboard are no longer working. Do I need to put I2C/PS2 kexts elsewhere? Seems to have only happened once Link to comment Share on other sites More sharing options...
Recommended Posts