Jump to content
esmith1966

GIGABYTE Z370 AORUS Gaming 7 Build with RX570 motherboard...

Recommended Posts

Have built a GIGABYTE Z370 AORUS Gaming 7 system with 500gb SSD and 

XFX - AMD Radeon RX 570 4G display card...

 

ISSUES 

Display rotation is not properly 'remembered' better boots...

 

Also I think some of these KEXT are not needed...

 

Attached is my config.sys file and a list of the kext in the EFI "other" folder...

Archive.zip

Share this post


Link to post
Share on other sites

does your monitor support Enhanced - Display Data Channel ?

  if it does then you might need to look into I2c and the ACPI implementation of it on your motherboard. also your monitors EDID information being provided to your system.

 

E‐DDC (Enhanced DDC): an I 2 C based bidirectional based supporting to access up to 32 kBytes data.

  It was introduced at the same time as E‐EDID version 1.3.

E‐DDC supports the DDC/CI (DDC Command Interface) standard protocol that allows to send commands to the display. the system receives the data from the sensors of the display such as an orientation sensor  for portrait or landscape orientation.

E‐DDC Version 1.2 added support for Display Port

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×