itzkr0me Posted September 26, 2018 Share Posted September 26, 2018 Hi Guys! I'm back trying to hack a Dell E7450 Broadwell i5 (intel graphics) and am having issues even getting started. I've done this before, but this one is giving me headaches. I install Clover (4617) onto a 64GB USB stick according to the instructions. Please the proper generic EFI folder in the proper location as well as the HS bootpacks (running latest A19 bios, so I used those files), LILU, Intel Patch (as opposed to messing with the BIOS) and the HSFPlus.efi file. I can boot to the initial screen where you choose to enter Clover boot. It runs through a whole bunch of stuff and then for about 1/8th of a second shows the apple logo and a progress bar, then exits to a black screen. It goes no further. The computer still has the WIFI light on and if I press a button my USB stick will flash as if it's being accessed. The computer seems to be on, just no picture. Any thoughts here? What files do you need? I didn't see anything in "Problem Reporting" or FAQ that could help with getting you what you need to point me in the right direction. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 26, 2018 Moderators Share Posted September 26, 2018 try leaving out the DSDT and SSDT Link to comment Share on other sites More sharing options...
itzkr0me Posted September 26, 2018 Author Share Posted September 26, 2018 That throws this panic Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 26, 2018 Moderators Share Posted September 26, 2018 Upgrade Clover to the latest, if still failed, post the Clover folder for review Link to comment Share on other sites More sharing options...
itzkr0me Posted September 27, 2018 Author Share Posted September 27, 2018 I used the latest clover from yesterday. Attached is my compressed CLOVER folder. CLOVER.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 27, 2018 Moderators Share Posted September 27, 2018 Try this, replaced into /EFI/Clover E7x50.zip Link to comment Share on other sites More sharing options...
itzkr0me Posted September 27, 2018 Author Share Posted September 27, 2018 Nice! I'm installed and working mostly ok. I just have no sound at the moment or WiFI (Need to install a supported card). I'll mess around with the sound tomorrow, unless you know a quick fix. Thanks SO much for your help Jake. Much appreciated! Link to comment Share on other sites More sharing options...
itzkr0me Posted September 28, 2018 Author Share Posted September 28, 2018 Evening Jake & everyone. I've spent the better part of the day today trying to fix my graphics issue to no avail. Any help is appreciated. I've attached a screenshot of my graphics that is showing 7MB VRAM total. I do not have QE/CI at the moment. Everything else seems to be working fine aside from this. Problem reporting files are attached. debug_24056.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted September 28, 2018 Moderators Share Posted September 28, 2018 why did you add fakeID for IntelGFX under Devices in the Config file? That will cause it to not load the Intel Graphics kext. Remove it and reboot. Why did you leave out USBPowerE7450? Link to comment Share on other sites More sharing options...
itzkr0me Posted September 28, 2018 Author Share Posted September 28, 2018 The USBPowerE7450 was outside of the other folder. I moved it over and repaired permissions. I also removed that fakeID, saved config and restarted. I get the same error. New debug attached. debug_17761.zip Link to comment Share on other sites More sharing options...
Recommended Posts