hansimglück2 Posted January 2, 2019 Share Posted January 2, 2019 Here it is... debug_23333.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 2, 2019 Moderators Share Posted January 2, 2019 Wrong SSDT. Not for your CPU, remove it. Also the AMD discrete card needs to be disable via SSDT/DSDT patching Here, replace the Config file and add the SSDT*.aml to /EFI/Clover/ACPI/Patched and remove the SSDT.aml DisableAMD.zip Link to comment Share on other sites More sharing options...
hansimglück2 Posted January 4, 2019 Share Posted January 4, 2019 Thanks a lot Jake Lo. The shutdown Problem is gone now. Link to comment Share on other sites More sharing options...
TheOtherOne Posted January 4, 2019 Author Share Posted January 4, 2019 hello hansimglück2 does your sleep is working in all meanings? Like putting the machine in sleep mode with plugged in charger or when you boot up, does it always go to the desktop or is it sometimes a sleep mode and right after this it shows the desktop? Link to comment Share on other sites More sharing options...
hansimglück2 Posted January 4, 2019 Share Posted January 4, 2019 Sleepmode isn´t working. When i put the Laptop in sleep only the screen goes off. When i press a key the screen then comes on again... Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 4, 2019 Moderators Share Posted January 4, 2019 Make sure you disable in BIOS Wake on LAN Wake on WLAN Wake on USB Link to comment Share on other sites More sharing options...
hansimglück2 Posted January 4, 2019 Share Posted January 4, 2019 Hi Jake, these options are all off. maybe a new debugfile will help? debug_22428.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 5, 2019 Moderators Share Posted January 5, 2019 AMD still not disabled. Replace with this one to /EFI/Clover/ACPI/Patched SSDT-DDGPU.aml.zip Link to comment Share on other sites More sharing options...
hansimglück2 Posted January 5, 2019 Share Posted January 5, 2019 I have replaced the file but nothing changes... what about the 10.14.2 Update? is that maybe the problem? Link to comment Share on other sites More sharing options...
z1326 Posted January 5, 2019 Share Posted January 5, 2019 I also use E6540 and this is what I've got so far. config.zip kexts.zip patched.zip What works: CPU frequency adjustment(though SSDT.aml,so if it does not suit for your CPU, remove it and put your own SSDT.aml back into the right folder), HD4600, AMD 8790M disabled, sleep(by system menu only), touchpad, SD card reader, USB, camera, internal speakers, internal mic, HDMI video output,Ethernet, brightness adjustment(by system menu only),battery and AC status What doesn't work: AR9285 wifi (cause Apple removed the related driver in Mojave), sleep by closing the lid, brightness and volume adjustment by hitting the keyboard fastkeys, HDMI audio output To hansimglück2: As far as I know, there're two sub-type of Latitude E6540, the early sub-type and the late sub-type. Dell use lvds-40pin LCD panels in sub-type E6540 first and changed to edp-30pin LCD panels in the late sub-type E6540 intead. So the motherboard of the early and the late sub-type are not the same. BTW: Mine E6540 has some strange problems. When I press Ctrl + Alt + Del under DOS or BIOS settings, the E6540 just shut down and refuse to reboot. The AMD 8790M graphics also causes auto-shutdown problems in Windows 7 32bit (after AMD graphics driver installed) or some Linux based system (such as Ubuntu). Before the auto-shutdown the fan will run very fast and make quite a noise. After the auto shut-down, I can find "critical tempreture shutdown" logged in the BIOS.This problem gave me quite a lot of hard times when I tried to disable the AMD 8790M(cause when it's disabled the E6540 always auto-shtudown and finally some other guy helped me disabled 8790M successfully) So mine E6540 is the early sub-type and I wonder what's yours. Do you have the same problems? To Jake Lo: Could you help to fix the HDMI audio output and the fastkey problems? I'm not a native English speaker so sorry for my poor English. Link to comment Share on other sites More sharing options...
Recommended Posts