Jump to content

Recommended Posts

@Jake Lo Thank you so much for your reply


Here are the specs that I could get on linux:

  • Intel Skylake i5-6200U CPU @ 2.30GHz
  • Intel HD Graphics 520 (GT2)
  • 16GB RAM DDR4 2400
  • SSD 240GB KINGSTON SA400S37240G
  • Qualcomm Atheros QCA6174 802.11ac Wireless
  • Realtek RTL8111/8168/8411 Gigabit Ethernet
  • USB 3.0
  • I2C serial IO Controller


And attached is the clover folder


Thanks in advance


Link to post
Share on other sites
  • Administrators

Please note that the Qualcomm wireless card fitted to your laptop is not supported. You may refer to our R&D-> Wireless section for inventories of alternatives.

Link to post
Share on other sites

Hello guys,


I have successfully installed Mojave 10.14.6 on my 3480 Latitude with your EFI folder.


I´d like to add two things that may be intersting: 


- Upgrade the screen to FullHD (cost about 50 euros and it´s plug&play)

- Installed an KingDian M.2 SATA 2242 on the WWAN port with the following results:


SATAIII disk: Samsung 840 EVO 1TB (SSD Degradated - Has 49% of remaining life)
WRITE: 385.4/MBs 
READ: 502.6/MBs


WWAN: KingDian N400 2242 128GB
WRITE: 437.2/MBs 
READ: 504.5/MBs

RAID 0 with partitions of the same size (119.69GB)
WRITE: 760.7/MBs 
READ: 943.9/MBs

This is a great improvement and shows that there is no bottleneck (6Gbps) when using both drives at the same time.

Best Regards,











Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...