hassan9311 Posted July 23, 2019 Author Share Posted July 23, 2019 i have 2x 8gb ram modules on the laptop jake Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 23, 2019 Moderators Share Posted July 23, 2019 boot with -igfxvesa as recommended earlier Link to comment Share on other sites More sharing options...
hassan9311 Posted July 23, 2019 Author Share Posted July 23, 2019 i pressed o and entered the boot flag -igfxvesa as you guided me however its still a blank screen i checked in verbose mode with the command you said to use its the same error Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 23, 2019 Moderators Share Posted July 23, 2019 Try updating the following kexts in /EFI/Clover/kexts/Other: Lilu.kext Whatevergreen.kext Links: https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md Boot with -igfxvesa until installation is complete, might take a couple of reboots. Link to comment Share on other sites More sharing options...
hassan9311 Posted July 24, 2019 Author Share Posted July 24, 2019 Hi jake , So far it starts up installation then it crashes with a hazard circle sign it wont go further than that Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 24, 2019 Moderators Share Posted July 24, 2019 That means you USB installer is not detected. Try different ports. If still failed. Post the Clover folder again for review Link to comment Share on other sites More sharing options...
hassan9311 Posted July 25, 2019 Author Share Posted July 25, 2019 i tried all usb ports with the command -igfxvesa no joy it boots up to installer then crashes with the writing in verbose mode jumbled up then hazard sign EFI 2.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 25, 2019 Moderators Share Posted July 25, 2019 Are you kidding me??? Those are not even the files I linked. See here again Just download the bootpack and replace / NOT MERGE into /EFI/Clover Then update the 2 kexts I mentioned here and that's it Link to comment Share on other sites More sharing options...
hassan9311 Posted July 25, 2019 Author Share Posted July 25, 2019 Finally i got the installation to start i selected the hdd etc but around 5miins in to installation it kills all processes and resets any suggestions ? ive uploaded the efi folder and followed your advice is this efi ok ? EFI 3.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 25, 2019 Moderators Share Posted July 25, 2019 Looks better. 1st boot, you select USB installer -> installed to HDD 2nd boot, you boot with USB installer but you select the new option -> Boot Install MacOS from HDD 3rd reboot, you boot with USB installer and then select the newly installed HDD Continue with POST Installation. Install Clover and copy the EFI folder from USB to HDD Link to comment Share on other sites More sharing options...
Recommended Posts