ssprod Posted January 29, 2011 Share Posted January 29, 2011 Greetings, Dell D630-X3100 (A17), BCM9431 "Dell" wireless, Snow 10.6.6, RC6 EDP; Weird problem, airport icon shows up on desktop but is OFF, can't turn it ON via desktop or Sys.Pref network panel? Any suggestions would be most appreciated. Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 29, 2011 Administrators Share Posted January 29, 2011 rebranding your card might solve that... http://www.osxlatitude.com/groups/d4xosx/wiki/98753/Rebranding_Broadcom_80211abgn_Cards_as_Airport.html Link to comment Share on other sites More sharing options...
ssprod Posted January 30, 2011 Author Share Posted January 30, 2011 rebranding your card might solve that... http://www.osxlatitude.com/groups/d4xosx/wiki/98753/Rebranding_Broadcom_80211abgn_Cards_as_Airport.html Thanks Leon, i'm trying this as we speak...wondering if it's ok to run the Live CD, instead of the USB pendrive? If so, everything seems to be executing properly until the very last command, when I get a response "Operation not supported" Running LSPI, My card is branded (0c:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)) ----> Linux results of the re-branding are below. Thanks and Kind Regards. ssprod --------------------------------------------------------------------------------------------------------------------------------------------------- To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details. ubuntu@ubuntu:~$ sudo apt-get update Ign cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)/ lucid/main Translation-en_US Ign cdrom://Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)/ lucid/restricted Translation-en_US Get:1 http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com'>http://archive.ubuntu.com lucid Release.gpg [189B] Ign http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/'>http://archive.ubuntu.com/ubuntu/ lucid/main Translation-en_US Ign http://archive.ubuntu.com/ubuntu/ lucid/restricted Translation-en_US Get:2 http://security.ubuntu.com'>http://security.ubuntu.com'>http://security.ubuntu.com'>http://security.ubuntu.com'>http://security.ubuntu.com'>http://security.ubuntu.com lucid-security Release.gpg [198B] Ign http://security.ubuntu.com/ubuntu/'>http://security.ubuntu.com/ubuntu/'>http://security.ubuntu.com/ubuntu/'>http://security.ubuntu.com/ubuntu/ lucid-security/main Translation-en_US Ign http://security.ubuntu.com/ubuntu/ lucid-security/restricted Translation-en_US Get:3 http://archive.ubuntu.com lucid-updates Release.gpg [198B] Ign http://archive.ubuntu.com/ubuntu/ lucid-updates/main Translation-en_US Ign http://archive.ubuntu.com/ubuntu/ lucid-updates/restricted Translation-en_US Get:4 http://archive.ubuntu.com lucid Release [57.2kB] Get:5 http://security.ubuntu.com lucid-security Release [44.7kB] Get:6 http://archive.ubuntu.com lucid-updates Release [44.7kB] Get:7 http://security.ubuntu.com lucid-security/main Packages [128kB] Get:8 http://archive.ubuntu.com lucid/main Packages [1,386kB] Get:9 http://security.ubuntu.com lucid-security/restricted Packages [14B] Get:10 http://security.ubuntu.com lucid-security/main Sources [42.7kB] Get:11 http://security.ubuntu.com lucid-security/restricted Sources [14B] Get:12 http://archive.ubuntu.com lucid/restricted Packages [6,208B] Get:13 http://archive.ubuntu.com lucid/main Sources [659kB] Get:14 http://archive.ubuntu.com lucid/restricted Sources [3,775B] Get:15 http://archive.ubuntu.com lucid-updates/main Packages [436kB] Get:16 http://archive.ubuntu.com lucid-updates/restricted Packages [3,240B] Get:17 http://archive.ubuntu.com lucid-updates/main Sources [177kB] Get:18 http://archive.ubuntu.com lucid-updates/restricted Sources [1,443B] Fetched 2,990kB in 4s (721kB/s) Reading package lists... Done ubuntu@ubuntu:~$ sudo apt-get install build-essential Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: dpkg-dev fakeroot g++ g++-4.4 libstdc++6-4.4-dev patch xz-utils Suggested packages: debian-keyring debian-maintainers g++-multilib g++-4.4-multilib gcc-4.4-doc libstdc++6-4.4-dbg libstdc++6-4.4-doc diffutils-doc The following NEW packages will be installed: build-essential dpkg-dev fakeroot g++ g++-4.4 libstdc++6-4.4-dev patch xz-utils 0 upgraded, 8 newly installed, 0 to remove and 408 not upgraded. Need to get 654kB/7,572kB of archives. After this operation, 24.6MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://security.ubuntu.com/ubuntu/ lucid-security/main dpkg-dev 1.15.5.6ubuntu4.5 [654kB] Fetched 654kB in 5s (117kB/s) Selecting previously deselected package libstdc++6-4.4-dev. (Reading database ... 129801 files and directories currently installed.) Unpacking libstdc++6-4.4-dev (from .../libstdc++6-4.4-dev_4.4.3-4ubuntu5_i386.deb) ... Selecting previously deselected package g++-4.4. Unpacking g++-4.4 (from .../g++-4.4_4.4.3-4ubuntu5_i386.deb) ... Selecting previously deselected package g++. Unpacking g++ (from .../g++_4.4.3-1ubuntu1_i386.deb) ... Selecting previously deselected package xz-utils. Unpacking xz-utils (from .../xz-utils_4.999.9beta+20091116-1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from .../patch_2.6-2ubuntu1_i386.deb) ... Selecting previously deselected package dpkg-dev. Unpacking dpkg-dev (from .../dpkg-dev_1.15.5.6ubuntu4.5_all.deb) ... Selecting previously deselected package build-essential. Unpacking build-essential (from .../build-essential_11.4build1_i386.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from .../fakeroot_1.14.4-1ubuntu1_i386.deb) ... Processing triggers for man-db ... Setting up xz-utils (4.999.9beta+20091116-1) ... Setting up patch (2.6-2ubuntu1) ... Setting up dpkg-dev (1.15.5.6ubuntu4.5) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up libstdc++6-4.4-dev (4.4.3-4ubuntu5) ... Setting up g++-4.4 (4.4.3-4ubuntu5) ... Setting up g++ (4:4.4.3-1ubuntu1) ... update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode. Setting up build-essential (11.4build1) ... ubuntu@ubuntu:~$ sudo apt-get install curl Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: curl 0 upgraded, 1 newly installed, 0 to remove and 408 not upgraded. Need to get 208kB of archives. After this operation, 328kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ lucid/main curl 7.19.7-1ubuntu1 [208kB] Fetched 208kB in 0s (225kB/s) Selecting previously deselected package curl. (Reading database ... 130833 files and directories currently installed.) Unpacking curl (from .../curl_7.19.7-1ubuntu1_i386.deb) ... Processing triggers for man-db ... Setting up curl (7.19.7-1ubuntu1) ... ubuntu@ubuntu:~$ sudo apt-get install git-core Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libdigest-sha1-perl liberror-perl Suggested packages: git-doc git-arch git-cvs git-svn git-email git-daemon-run git-gui gitk gitweb The following NEW packages will be installed: git-core libdigest-sha1-perl liberror-perl 0 upgraded, 3 newly installed, 0 to remove and 408 not upgraded. Need to get 5,688kB of archives. After this operation, 11.9MB of additional disk space will be used. Do you want to continue [Y/n]? y Get:1 http://security.ubuntu.com/ubuntu/ lucid-security/main git-core 1:1.7.0.4-1ubuntu0.2 [5,638kB] Get:2 http://archive.ubuntu.com/ubuntu/ lucid/main liberror-perl 0.17-1 [23.8kB] Get:3 http://archive.ubuntu.com/ubuntu/ lucid/main libdigest-sha1-perl 2.12-1build1 [26.2kB] Fetched 5,688kB in 9s (610kB/s) Selecting previously deselected package liberror-perl. (Reading database ... 130850 files and directories currently installed.) Unpacking liberror-perl (from .../liberror-perl_0.17-1_all.deb) ... Selecting previously deselected package libdigest-sha1-perl. Unpacking libdigest-sha1-perl (from .../libdigest-sha1-perl_2.12-1build1_i386.deb) ... Selecting previously deselected package git-core. Unpacking git-core (from .../git-core_1%3a1.7.0.4-1ubuntu0.2_i386.deb) ... Processing triggers for man-db ... Setting up liberror-perl (0.17-1) ... Setting up libdigest-sha1-perl (2.12-1build1) ... Setting up git-core (1:1.7.0.4-1ubuntu0.2) ... ubuntu@ubuntu:~$ sudo apt-get install b43-fwcutter Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: b43-fwcutter 0 upgraded, 1 newly installed, 0 to remove and 408 not upgraded. Need to get 0B/17.9kB of archives. After this operation, 115kB of additional disk space will be used. Preconfiguring packages ... Selecting previously deselected package b43-fwcutter. (Reading database ... 131374 files and directories currently installed.) Unpacking b43-fwcutter (from .../b43-fwcutter_012-1build1_i386.deb) ... Processing triggers for man-db ... Setting up b43-fwcutter (1:012-1build1) ... --2011-01-30 22:33:05-- http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o Resolving downloads.openwrt.org... 78.24.191.177 Connecting to downloads.openwrt.org|78.24.191.177|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 652866 (638K) [text/plain] Saving to: `wl_apsta-3.130.20.0.o' 100%[======================================>] 652,866 428K/s in 1.5s 2011-01-30 22:33:07 (428 KB/s) - `wl_apsta-3.130.20.0.o' saved [652866/652866] --2011-01-30 22:33:07-- http://mirror2.openwrt.org/sources/broadcom-wl-4.150.10.5.tar.bz2 Resolving mirror2.openwrt.org... 46.4.11.11 Connecting to mirror2.openwrt.org|46.4.11.11|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 3888794 (3.7M) [application/x-bzip2] Saving to: `broadcom-wl-4.150.10.5.tar.bz2' 100%[======================================>] 3,888,794 404K/s in 10s 2011-01-30 22:33:18 (367 KB/s) - `broadcom-wl-4.150.10.5.tar.bz2' saved [3888794/3888794] This file is recognised as: ID : FW10 filename : wl_apsta.o version : 295.14 MD5 : e08665c5c5b66beb9c3b2dd54aa80cb3 Extracting b43legacy/ucode2.fw Extracting b43legacy/ucode4.fw Extracting b43legacy/ucode5.fw Extracting b43legacy/ucode11.fw Extracting b43legacy/pcm4.fw Extracting b43legacy/pcm5.fw Extracting b43legacy/a0g0bsinitvals2.fw Extracting b43legacy/b0g0bsinitvals5.fw Extracting b43legacy/a0g0initvals5.fw Extracting b43legacy/a0g1bsinitvals5.fw Extracting b43legacy/a0g0initvals2.fw Extracting b43legacy/a0g1initvals5.fw Extracting b43legacy/b0g0bsinitvals2.fw Extracting b43legacy/b0g0initvals5.fw Extracting b43legacy/b0g0initvals2.fw Extracting b43legacy/a0g0bsinitvals5.fw tar: Record size = 8 blocks broadcom-wl-4.150.10.5/ broadcom-wl-4.150.10.5/driver/ broadcom-wl-4.150.10.5/driver/config/ broadcom-wl-4.150.10.5/driver/config/wlconfig_apdef broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_ap broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_ap_1chipG broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_ap_micro broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_ap_mimo broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_apsta broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_apsta_1chipG broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_apsta_micro broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_apsta_mimo broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_sta broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_sta_1chipG broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_sta_micro broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_router_sta_mimo broadcom-wl-4.150.10.5/driver/config/wlconfig_lx_shared broadcom-wl-4.150.10.5/driver/config/wlconfig_micro broadcom-wl-4.150.10.5/driver/config/wlconfig_nomimo broadcom-wl-4.150.10.5/driver/config/wl_default broadcom-wl-4.150.10.5/driver/config/wl_hnd broadcom-wl-4.150.10.5/driver/wl_ap_micro.o broadcom-wl-4.150.10.5/driver/wl_ap_mimo.o broadcom-wl-4.150.10.5/driver/wl_ap.o broadcom-wl-4.150.10.5/driver/wl_apsta_micro.o broadcom-wl-4.150.10.5/driver/wl_apsta_mimo.o broadcom-wl-4.150.10.5/driver/wl_apsta.o broadcom-wl-4.150.10.5/driver/wl_sta_micro.o broadcom-wl-4.150.10.5/driver/wl_sta_mimo.o broadcom-wl-4.150.10.5/driver/wl_sta.o broadcom-wl-4.150.10.5/nas_exe.o broadcom-wl-4.150.10.5/wl_exe.o broadcom-wl-4.150.10.5/include/ broadcom-wl-4.150.10.5/include/UdpLib.h broadcom-wl-4.150.10.5/include/bcm4710.h broadcom-wl-4.150.10.5/include/bcm947xx.h broadcom-wl-4.150.10.5/include/bcmcrypto/ broadcom-wl-4.150.10.5/include/bcmcrypto/aes.h broadcom-wl-4.150.10.5/include/bcmcrypto/aeskeywrap.h broadcom-wl-4.150.10.5/include/bcmcrypto/bcmccx.h broadcom-wl-4.150.10.5/include/bcmcrypto/bn.h broadcom-wl-4.150.10.5/include/bcmcrypto/ccx.h broadcom-wl-4.150.10.5/include/bcmcrypto/des.h broadcom-wl-4.150.10.5/include/bcmcrypto/dh.h broadcom-wl-4.150.10.5/include/bcmcrypto/hmac_sha256.h broadcom-wl-4.150.10.5/include/bcmcrypto/md4.h broadcom-wl-4.150.10.5/include/bcmcrypto/md5.h broadcom-wl-4.150.10.5/include/bcmcrypto/passhash.h broadcom-wl-4.150.10.5/include/bcmcrypto/prf.h broadcom-wl-4.150.10.5/include/bcmcrypto/rc4.h broadcom-wl-4.150.10.5/include/bcmcrypto/rijndael-alg-fst.h broadcom-wl-4.150.10.5/include/bcmcrypto/sha1.h broadcom-wl-4.150.10.5/include/bcmcrypto/sha256.h broadcom-wl-4.150.10.5/include/bcmdefs.h broadcom-wl-4.150.10.5/include/bcmdevs.h broadcom-wl-4.150.10.5/include/bcmendian.h broadcom-wl-4.150.10.5/include/bcmnvram.h broadcom-wl-4.150.10.5/include/bcmotp.h broadcom-wl-4.150.10.5/include/bcmparams.h broadcom-wl-4.150.10.5/include/bcmperf.h broadcom-wl-4.150.10.5/include/bcmrobo.h broadcom-wl-4.150.10.5/include/bcmsrom.h broadcom-wl-4.150.10.5/include/bcmstdlib.h broadcom-wl-4.150.10.5/include/bcmutils.h broadcom-wl-4.150.10.5/include/bcmwifi.h broadcom-wl-4.150.10.5/include/bitfuncs.h broadcom-wl-4.150.10.5/include/epivers.h broadcom-wl-4.150.10.5/include/epivers.h.in broadcom-wl-4.150.10.5/include/etioctl.h broadcom-wl-4.150.10.5/include/flash.h broadcom-wl-4.150.10.5/include/flashutl.h broadcom-wl-4.150.10.5/include/hndchipc.h broadcom-wl-4.150.10.5/include/hndcpu.h broadcom-wl-4.150.10.5/include/hnddma.h broadcom-wl-4.150.10.5/include/hndgige.h broadcom-wl-4.150.10.5/include/hndmips.h broadcom-wl-4.150.10.5/include/hndpci.h broadcom-wl-4.150.10.5/include/hndpmu.h broadcom-wl-4.150.10.5/include/linux_gpio.h broadcom-wl-4.150.10.5/include/linuxver.h broadcom-wl-4.150.10.5/include/min_osl.h broadcom-wl-4.150.10.5/include/mipsinc.h broadcom-wl-4.150.10.5/include/ndiserrmap.h broadcom-wl-4.150.10.5/include/osl.h broadcom-wl-4.150.10.5/include/pcicfg.h broadcom-wl-4.150.10.5/include/proto/ broadcom-wl-4.150.10.5/include/proto/802.11.h broadcom-wl-4.150.10.5/include/proto/802.11e.h broadcom-wl-4.150.10.5/include/proto/802.1d.h broadcom-wl-4.150.10.5/include/proto/bcmeth.h broadcom-wl-4.150.10.5/include/proto/bcmevent.h broadcom-wl-4.150.10.5/include/proto/bcmip.h broadcom-wl-4.150.10.5/include/proto/bcmtcp.h broadcom-wl-4.150.10.5/include/proto/eap.h broadcom-wl-4.150.10.5/include/proto/eapol.h broadcom-wl-4.150.10.5/include/proto/ethernet.h broadcom-wl-4.150.10.5/include/proto/vlan.h broadcom-wl-4.150.10.5/include/proto/wpa.h broadcom-wl-4.150.10.5/include/rts/ broadcom-wl-4.150.10.5/include/rts/crc.h broadcom-wl-4.150.10.5/include/sbchipc.h broadcom-wl-4.150.10.5/include/sbconfig.h broadcom-wl-4.150.10.5/include/sbgige.h broadcom-wl-4.150.10.5/include/sbhndcpu.h broadcom-wl-4.150.10.5/include/sbhnddma.h broadcom-wl-4.150.10.5/include/sbhndmips.h broadcom-wl-4.150.10.5/include/sbhndpio.h broadcom-wl-4.150.10.5/include/sbmemc.h broadcom-wl-4.150.10.5/include/sbpci.h broadcom-wl-4.150.10.5/include/sbpcie.h broadcom-wl-4.150.10.5/include/sbpcmcia.h broadcom-wl-4.150.10.5/include/sbsdio.h broadcom-wl-4.150.10.5/include/sbsdpcmdev.h broadcom-wl-4.150.10.5/include/sbsdram.h broadcom-wl-4.150.10.5/include/sbsocram.h broadcom-wl-4.150.10.5/include/sbsprom.h broadcom-wl-4.150.10.5/include/sbutils.h broadcom-wl-4.150.10.5/include/sflash.h broadcom-wl-4.150.10.5/include/trxhdr.h broadcom-wl-4.150.10.5/include/typedefs.h broadcom-wl-4.150.10.5/include/wlioctl.h broadcom-wl-4.150.10.5/include/linux_osl.h broadcom-wl-4.150.10.5/shared/ broadcom-wl-4.150.10.5/shared/bcmotp.c broadcom-wl-4.150.10.5/shared/bcmrobo.c broadcom-wl-4.150.10.5/shared/bcmsrom.c broadcom-wl-4.150.10.5/shared/bcmstdlib.c broadcom-wl-4.150.10.5/shared/bcmutils.c broadcom-wl-4.150.10.5/shared/boot.S broadcom-wl-4.150.10.5/shared/bzip2_inflate.c broadcom-wl-4.150.10.5/shared/cfe_osl.c broadcom-wl-4.150.10.5/shared/flashutl.c broadcom-wl-4.150.10.5/shared/gzip_inflate.c broadcom-wl-4.150.10.5/shared/hndchipc.c broadcom-wl-4.150.10.5/shared/hnddma.c broadcom-wl-4.150.10.5/shared/hndgige.c broadcom-wl-4.150.10.5/shared/hndmips.c broadcom-wl-4.150.10.5/shared/hndpci.c broadcom-wl-4.150.10.5/shared/hndpmu.c broadcom-wl-4.150.10.5/shared/hndrte.lds.in broadcom-wl-4.150.10.5/shared/linux_gpio.c broadcom-wl-4.150.10.5/shared/linux_osl.c broadcom-wl-4.150.10.5/shared/load.c broadcom-wl-4.150.10.5/shared/min_osl.c broadcom-wl-4.150.10.5/shared/nvramstubs.c broadcom-wl-4.150.10.5/shared/sbsdram.S broadcom-wl-4.150.10.5/shared/sbutils.c broadcom-wl-4.150.10.5/shared/sflash.c broadcom-wl-4.150.10.5/shared/sromstubs.c broadcom-wl-4.150.10.5/shared/xip.lds.in This file is recognised as: ID : FW13 filename : wl_apsta_mimo.o version : 410.2160 MD5 : cb8d70972b885b1f8883b943c0261a3c Extracting b43/pcm5.fw Extracting b43/ucode15.fw Extracting b43/ucode14.fw Extracting b43/ucode13.fw Extracting b43/ucode11.fw Extracting b43/ucode9.fw Extracting b43/ucode5.fw Extracting b43/lp0bsinitvals15.fw Extracting b43/lp0initvals15.fw Extracting b43/lp0bsinitvals14.fw Extracting b43/lp0initvals14.fw Extracting b43/a0g1bsinitvals13.fw Extracting b43/a0g1initvals13.fw Extracting b43/b0g0bsinitvals13.fw Extracting b43/b0g0initvals13.fw Extracting b43/lp0bsinitvals13.fw Extracting b43/lp0initvals13.fw Extracting b43/n0absinitvals11.fw Extracting b43/n0bsinitvals11.fw Extracting b43/n0initvals11.fw Extracting b43/a0g1bsinitvals9.fw Extracting b43/a0g0bsinitvals9.fw Extracting b43/a0g1initvals9.fw Extracting b43/a0g0initvals9.fw Extracting b43/b0g0bsinitvals9.fw Extracting b43/b0g0initvals9.fw Extracting b43/a0g1bsinitvals5.fw Extracting b43/a0g0bsinitvals5.fw Extracting b43/a0g1initvals5.fw Extracting b43/a0g0initvals5.fw Extracting b43/b0g0bsinitvals5.fw Extracting b43/b0g0initvals5.fw ubuntu@ubuntu:~$ sudo modprobe b43 ubuntu@ubuntu:~$ git clone http://git.bu3sch.de/git/b43-tools.git Initialized empty Git repository in /home/ubuntu/b43-tools/.git/ fatal: http://git.bu3sch.de/git/b43-tools.git/info/refs not found: did you run git update-server-info on the server? ubuntu@ubuntu:~$ git clone git://git.bu3sch.de/b43-tools.git Initialized empty Git repository in /home/ubuntu/b43-tools/.git/ remote: Counting objects: 737, done. remote: Compressing objects: 100% (395/395), done. remote: Total 737 (delta 510), reused 488 (delta 336) Receiving objects: 100% (737/737), 191.13 KiB | 158 KiB/s, done. Resolving deltas: 100% (510/510), done. ubuntu@ubuntu:~$ cd b43-tools/ssb_sprom ubuntu@ubuntu:~/b43-tools/ssb_sprom$ make DEPEND dep/utils.d DEPEND dep/ssb_sprom.d CC obj/ssb_sprom.o ssb_sprom.c: In function ‘print_banner’: ssb_sprom.c:681: warning: format not a string literal and no format arguments ssb_sprom.c:683: warning: format not a string literal and no format arguments CC obj/utils.o CC ssb-sprom ubuntu@ubuntu:~/b43-tools/ssb_sprom$ sudo cp ssb-sprom /usr/sbin/ ubuntu@ubuntu:~/b43-tools/ssb_sprom$ sudo chmod 755 /usr/sbin/ssb-sprom ubuntu@ubuntu:~/b43-tools/ssb_sprom$ sudo chown root:root /usr/sbin/ssb-sprom ubuntu@ubuntu:~/b43-tools/ssb_sprom$ SSB_SPROM=$(find /sys/devices -name ssb_sprom)ubuntu@ubuntu:~/b43-tools/ssb_sprom$ echo $SSB_SPROM /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ssb_sprom ubuntu@ubuntu:~/b43-tools/ssb_sprom$ cd ~ ubuntu@ubuntu:~$ sudo cat $SSB_SPROM > ssb_sprom_copy ubuntu@ubuntu:~$ ssb-sprom -i ssb_sprom_copy -P SPROM(0x05A), et0phy, Ethernet phy settings(0) = 0x1F SPROM(0x05A), et1phy, Ethernet phy settings(1) = 0x1F SPROM(0x05A), et0mdc, MDIO for ethernet 0 = ON SPROM(0x05A), et1mdc, MDIO for ethernet 1 = ON SPROM(0x05C), brev, Board revision = 0x44 SPROM(0x05C), antbg0, Antenna 0 available for B/G PHY = ON SPROM(0x05C), antbg1, Antenna 1 available for B/G PHY = ON SPROM(0x05C), anta0, Antenna 0 available for A PHY = OFF SPROM(0x05C), anta1, Antenna 1 available for A PHY = OFF SPROM(0x074), antgbg, Antenna gain (2 GHz) = 0x02 SPROM(0x074), antga, Antenna gain (5 GHz) = 0xFF SPROM(0x05E), pa0b0, Power Amplifier W0 PAB0 = 0x153D SPROM(0x060), pa0b1, Power Amplifier W0 PAB1 = 0xFAA0 SPROM(0x062), pa0b2, Power Amplifier W0 PAB2 = 0xFE79 SPROM(0x06A), pa1b0, Power Amplifier W1 PAB0 = 0xFFFF SPROM(0x06C), pa1b1, Power Amplifier W1 PAB1 = 0xFFFF SPROM(0x06E), pa1b2, Power Amplifier W1 PAB2 = 0xFFFF SPROM(0x064), led0, LED 0 behavior = 0xFF SPROM(0x064), led1, LED 1 behavior = 0x83 SPROM(0x066), led2, LED 2 behavior = 0xFF SPROM(0x066), led3, LED 3 behavior = 0xFF SPROM(0x068), maxpbg, B/G PHY max power out = 0x4A SPROM(0x068), maxpa, A PHY max power out = 0xFF SPROM(0x070), itssibg, Idle TSSI target 2 GHz = 0x3E SPROM(0x070), itssia, Idle TSSI target 5 GHz = 0xFF SPROM(0x048), bgmac, MAC Address for 802.11b/g = 00:19:7d:99:54:f4 SPROM(0x04E), etmac, MAC Address for ethernet = ff:ff:ff:ff:ff:ff SPROM(0x054), amac, MAC Address for 802.11a = ff:ff:ff:ff:ff:ff SPROM(0x004), subp, Subsystem Product ID = 0x0007 SPROM(0x006), subv, Subsystem Vendor ID = 0x1028 SPROM(0x008), ppid, PCI Product ID = 0x0008 SPROM(0x038), bflhi, High 16 bits of boardflags = 0x0000 SPROM(0x072), bfl, Low 16 bits of boardflags = 0x4A49 SPROM(0x05C), loc, Locale / Country Code = 0x0 The input file is data from a revision 2 SPROM. ubuntu@ubuntu:~$ ssb-sprom -i ssb_sprom_copy --subv 0x106b --subp 0x0087 -o new_ssb_sprom_copy The input file is data from a revision 2 SPROM. ubuntu@ubuntu:~$ ssb-sprom -i new_ssb_sprom_copy -P SPROM(0x05A), et0phy, Ethernet phy settings(0) = 0x1F SPROM(0x05A), et1phy, Ethernet phy settings(1) = 0x1F SPROM(0x05A), et0mdc, MDIO for ethernet 0 = ON SPROM(0x05A), et1mdc, MDIO for ethernet 1 = ON SPROM(0x05C), brev, Board revision = 0x44 SPROM(0x05C), antbg0, Antenna 0 available for B/G PHY = ON SPROM(0x05C), antbg1, Antenna 1 available for B/G PHY = ON SPROM(0x05C), anta0, Antenna 0 available for A PHY = OFF SPROM(0x05C), anta1, Antenna 1 available for A PHY = OFF SPROM(0x074), antgbg, Antenna gain (2 GHz) = 0x02 SPROM(0x074), antga, Antenna gain (5 GHz) = 0xFF SPROM(0x05E), pa0b0, Power Amplifier W0 PAB0 = 0x153D SPROM(0x060), pa0b1, Power Amplifier W0 PAB1 = 0xFAA0 SPROM(0x062), pa0b2, Power Amplifier W0 PAB2 = 0xFE79 SPROM(0x06A), pa1b0, Power Amplifier W1 PAB0 = 0xFFFF SPROM(0x06C), pa1b1, Power Amplifier W1 PAB1 = 0xFFFF SPROM(0x06E), pa1b2, Power Amplifier W1 PAB2 = 0xFFFF SPROM(0x064), led0, LED 0 behavior = 0xFF SPROM(0x064), led1, LED 1 behavior = 0x83 SPROM(0x066), led2, LED 2 behavior = 0xFF SPROM(0x066), led3, LED 3 behavior = 0xFF SPROM(0x068), maxpbg, B/G PHY max power out = 0x4A SPROM(0x068), maxpa, A PHY max power out = 0xFF SPROM(0x070), itssibg, Idle TSSI target 2 GHz = 0x3E SPROM(0x070), itssia, Idle TSSI target 5 GHz = 0xFF SPROM(0x048), bgmac, MAC Address for 802.11b/g = 00:19:7d:99:54:f4 SPROM(0x04E), etmac, MAC Address for ethernet = ff:ff:ff:ff:ff:ff SPROM(0x054), amac, MAC Address for 802.11a = ff:ff:ff:ff:ff:ff SPROM(0x004), subp, Subsystem Product ID = 0x0087 SPROM(0x006), subv, Subsystem Vendor ID = 0x106B SPROM(0x008), ppid, PCI Product ID = 0x0008 SPROM(0x038), bflhi, High 16 bits of boardflags = 0x0000 SPROM(0x072), bfl, Low 16 bits of boardflags = 0x4A49 SPROM(0x05C), loc, Locale / Country Code = 0x0 The input file is data from a revision 2 SPROM. ubuntu@ubuntu:~$ echo $SSB_SPROM /sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ssb_sprom ubuntu@ubuntu:~$ sudo cp new_ssb_sprom_copy $SSB_SPROM cp: writing `/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0/ssb_sprom': Operation not supported ubuntu@ubuntu:~$ Link to comment Share on other sites More sharing options...
Administrators Leon Posted January 31, 2011 Administrators Share Posted January 31, 2011 you need to be on cable and not activate the wireless network.. because if you activate the wireless, then you will get the above message... Link to comment Share on other sites More sharing options...
ssprod Posted January 31, 2011 Author Share Posted January 31, 2011 you need to be on cable and not activate the wireless network.. because if you activate the wireless, then you will get the above message... Leon, thanks once again sir! That did the trick... Much appreciated! ssprod Link to comment Share on other sites More sharing options...
Recommended Posts