Nicolas078 Posted January 30, 2021 Share Posted January 30, 2021 Hello everybody I'm french, sorry for my bad English... I would like to install Mojave with windows and linux. I followed the guide, but i've got a black screen... I don't understand why... Thks for your help EFI.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 30, 2021 Administrators Share Posted January 30, 2021 Like its M200M bigger brother, nVidia Quadro M1000M is Maxwell and unsupported outside Sierra/High Sierra in which it can only be suported with the nVidia Web Driver. It's totally unsupported in Mojave and later macOS versions. Had your Precision 7510 be fitted with the AMD FirePro W5170M alternative, you'd probably be more lucky, but... Meantime, you'll need to enable Optimus in BIOS, disable the nVidia GPU through patched DSDT/SSDT (to preserve battery) and run exclusively on the HD530 GPU of the i5-6300HQ. The EFI you posted contains no patched ACPI table, no add-on kexts and its Clover config refers to an incomplete and incorrect iMac17,1 (i.e. desktop) SMBIOS... This most certainly explains why you're getting much success. You need to go back to the guide you've used (whatever that may be) and probably follow it with better attention. Link to comment Share on other sites More sharing options...
Nicolas078 Posted January 30, 2021 Author Share Posted January 30, 2021 Thks for your answer I found the config.plist for i5 Skylake... and my guide is But my 7510 is latop so can you tell me what am i doing? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted January 30, 2021 Administrators Share Posted January 30, 2021 I'd say you messed up the 2nd part of the posted instructions. Because when I look into the Precision 7510 HD530 pack available in that guide, there's all the stuff you need and you're missing it all... Link to comment Share on other sites More sharing options...
Nicolas078 Posted January 31, 2021 Author Share Posted January 31, 2021 i restart all config... But i have got the same issue... black screen with this config... In the bios I checked the flags... EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 31, 2021 Moderators Share Posted January 31, 2021 Try my OpenCore files, replace Boot and OC into EFI, delete or backup the Clover folder Make sure you have these in the BIOS Switchable Graphics enabled UEFI enabled AHCI enabled Secure boot disabled EFI.zip Link to comment Share on other sites More sharing options...
Nicolas078 Posted February 1, 2021 Author Share Posted February 1, 2021 Thks a lot Jake I have a lot probleme to format ssd but it's work fine for install when i finish install, i tell you ok Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 4, 2021 Moderators Share Posted February 4, 2021 @Nicolas078 Does your 7510 have flickering screen issue? Not just on MacOS but Windows as well. What version of BIOS are you running? I'm hoping it's not a hardware issue but a BIOS version issue. It turned out to be a loose video cable. After adjusting the cable a little, all is good again. Link to comment Share on other sites More sharing options...
Recommended Posts