Moderators Jake Lo Posted February 12, 2021 Moderators Share Posted February 12, 2021 did you replace or just add the kext? should only have 1 enabled Kext is by 1revenger1 for Alps touchpad, if that doesn't work, then go with Dr Hurt's VoodooPS2Controller R6 Link to comment Share on other sites More sharing options...
Mihari Oyama Posted February 12, 2021 Author Share Posted February 12, 2021 i backup one old, then i replace ur but not work. now i use alps r6 from Dr Hurt's and work both trackpad + keyboard but brightness key mapped at F3 and Insert key although i add ssdt-brt6 into clover config Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 12, 2021 Administrators Share Posted February 12, 2021 You Clover setup is incorrect and your config therefore needs to be revisited and adjusted. In particular, remove that "Drop OEM" for SSDT and remove those "Generate P states" + "ASPN" + "APLF". These are not applicable to a Haswell laptop. In addition, there should be no need to apply "Patch APIC" + "DisableASPM" + "FixIPIC" + "FixSATA". On the other hand, unless you've patched your DSDT to that effect, you'll need "FixDarwin7" to have USB3 working. God only knows what else may need revisiting... NB: Please don't quote messages to post direct replies; use the Reply box at the bottom of the pages; thank you. Link to comment Share on other sites More sharing options...
Recommended Posts