Administrators Hervé Posted October 15, 2012 Administrators Share Posted October 15, 2012 I've never tried with lower then SL 10.6.3. That's my retail version. If it's possible for you, I'd recommend you try that release. Link to comment Share on other sites More sharing options...
franzelutza Posted October 16, 2012 Author Share Posted October 16, 2012 I've never tried with lower then SL 10.6.3. That's my retail version. If it's possible for you, I'd recommend you try that release. hi Herve, yes I'm doing better upgrade because i try today again and now, my SL DVD is not readable ... maybe that was the mistake. ...and now i remember i forget to make with myhack the fix i think better i download the dmg for lion and try again to make a usb installer with lion and maybe its working better what do you mean, lion is OK for D630 (combatibility list say it its ok) still one question please, is my understanding now for the steps: 1. make partition osx journaled on the usb installer with disk utility, option = master boot record 2. mount lion dmg or put dvd in the drive 3. start myhack 3.1.2 and create usb installer 10.7 (lion) or another 4. after finish, copy the extra folder from Dell_Latitude_D630-nvidia-lion.zip in the usb installer or create extra with myhack 5. start myhack and run fixit with full option 6. set the bios settings like link from your suggestion/proposal 7. start on d630 from the installer and install osx lion/ or SL 8. download the update combo 10.6.8 for SL or for Lion and install BUT NOT REBOOT 9. start app from the Install EDP.dmg 10. after finish restart the D630 and have fun with the best OS ever is that OK so or i forget something? THX a lot for your help, is much appreciated you guys are the best greets, ALex Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 16, 2012 Administrators Share Posted October 16, 2012 Lion is Ok on D630, yes, with ML Ok on D630 with nVidia GPU. What I meant was that, for SL, I never did the installation with a release lower than retail 10.6.3, so I have no past experience with 10.6/10.6.1/10.6.2. A few changes/notes in your list: 1) make that partition GUID, not MBR 4) create /Extra with myHack and point to downloaded model-specific bootpack when prompted for "Generic/Own...", selecting "Own..." 5) that is not required 7) at end of installation, when prompted for /Extra folder, simply point to the /Extra folder of your installation media (it will have the bootpack contents) The rest is spot on. Grüße. Link to comment Share on other sites More sharing options...
franzelutza Posted October 18, 2012 Author Share Posted October 18, 2012 hi herve - comment ca va, bien ? I'm a step further, at step 6) I put lion on the stick and then create extra, bios settings OK, but now on boot the following happens: see on this file : boot.mp4 (53 MB) https://dl.dropbox.com/u/97157586/boot.mp4 what's going on? I hope you can help me! Best thanks in advance, salut Alex Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 18, 2012 Administrators Share Posted October 18, 2012 Hmm, I see those 2 lines with "Invalid firmware - ...". I encountered that during very early attempts to install SL on my D630. Turned out I was not using the correct DSDT table (DSDT for Intel X3100 LoRes, as opposed to Intel X3100 HiRes). You were booting off the installation media. Are you sure you installed the correct Bootpack? Try and boot with -x -f -v options. Link to comment Share on other sites More sharing options...
franzelutza Posted October 18, 2012 Author Share Posted October 18, 2012 Hmm, I see those 2 lines with "Invalid firmware - ...". I encountered that during very early attempts to install SL on my D630. Turned out I was not using the correct DSDT table (DSDT for Intel X3100 LoRes, as opposed to Intel X3100 HiRes). You were booting off the installation media. Are you sure you installed the correct Bootpack? Try and boot with -x -f -v options. Herve, i try with -x -f -v and it's the same problem. Yes, i install the bootpack for lion and D630 nvidia. Any other idea what can i do? THX, Alex Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 18, 2012 Administrators Share Posted October 18, 2012 I'm confused... Which version of Mac OS are you trying to install? I understood it was Snow Leopard. For SL, use the D630 nVidia SL bootpack. For Lion, use the D630 nVidia Lion bootpack. Don't mix OS X versions and bootpacks. Link to comment Share on other sites More sharing options...
franzelutza Posted October 18, 2012 Author Share Posted October 18, 2012 I'm confused... Which version of Mac OS are you trying to install? I understood it was Snow Leopard. For SL, use the D630 nVidia SL bootpack. For Lion, use the D630 nVidia Lion bootpack. Don't mix OS X versions and bootpacks. sorry herve, i dont mix it. like i mention, i put lion and nvidia bootpack for lion because on my second try to make usb installer, my SL-DVD was not readable and then i put lion with lion nvidia-bootpack thx for your patience with me salut, alex Link to comment Share on other sites More sharing options...
Administrators Hervé Posted October 18, 2012 Administrators Share Posted October 18, 2012 Tut mir Leid, my mistake, I missed that point in your earlier post. It appears you've followed the correct process to create the key (assuming you chose "Create 10.7 installer") and begin installation, but I am wondering if you did not point to the wrong image for Lion. Did you point to the "InstallESD.dmg' image found inside the Lion image package when prompted for the Lion image (right click on Lion package then go to Contents->SharedSupport)? Link to comment Share on other sites More sharing options...
franzelutza Posted October 19, 2012 Author Share Posted October 19, 2012 salut Herve, i choose the only InstallEDP in the lion.app. Here are my screenshots, please take a look if anything is wrong. (package and content of install usb stick) THX a lot BR Alex EDIT 2 HOURS LATER: ------------------- Herve, you know, wonder take or need sometimes longer This give me no peace in my mind and I try on another D630 With Bios A04 (11.1.2007) !!! and I make only the changes in Bios: Sata AHCI, Virtualization on and dynamic acceleration off. I boot with –x –f –v and look on my screenshot (picture attached) Yippieh Merveilleux, Magnifique …now I continue with install… I give you later information if I was successfully and if lion runs smoothly. Cu Alex PS. On the second D630 the hardware is the same, only the processor is now Intel Core 2 Duo T7100 @ 1.8 GHz Link to comment Share on other sites More sharing options...
Recommended Posts