ZainAnjum Posted August 3, 2023 Share Posted August 3, 2023 Hi, I have installed Ventura 13.5 on Dell E7490. Everything works except TouchPad buttons and Trackpoint. EFI link: https://we.tl/t-csoMWBAnZu IORegistry attacthed. Zain’s 2nd MacBook Pro.ioreg Link to comment Share on other sites More sharing options...
Administrators Hervé Posted August 3, 2023 Administrators Share Posted August 3, 2023 FYI, it's a Latitude 7490, not an E7490. E Series stopped at Skylake E7x70. 1 Link to comment Share on other sites More sharing options...
Solution Jazzoo Posted August 3, 2023 Solution Share Posted August 3, 2023 @ZainAnjum - Your EFI is really messy. Try this and give us feedback: Dell 7490 Ventura Intel OC 0.9.4 1 Link to comment Share on other sites More sharing options...
ZainAnjum Posted August 3, 2023 Author Share Posted August 3, 2023 After using your EFI trackpad buttons and trackpoint started working but my wifi and Bluetooth stopped working i have intel wifi card Link to comment Share on other sites More sharing options...
Jazzoo Posted August 3, 2023 Share Posted August 3, 2023 What's the exact model of your Intel card ? Did you reset the NVRAM ? Link to comment Share on other sites More sharing options...
ZainAnjum Posted August 3, 2023 Author Share Posted August 3, 2023 With my old EFI the wifi works Software Versions: CoreWLAN: 16.0 (1657) CoreWLANKit: 16.0 (1657) Menu Extra: 17.0 (1728) System Information: 15.0 (1502) IO80211 Family: 12.0 (1200.13.0) Diagnostics: 11.0 (1163) AirPort Utility: 6.3.9 (639.21) Interfaces: en1: Card Type: Wi-Fi (0x8086, 0x150) Firmware Version: itlwm: 2.2.0_ee56708 fw: 36.ca7b901d.0 MAC Address: d0:ab:d5:f3:a8:77 Locale: FCC Country Code: ZZ Supported PHY Modes: 802.11 a/b/g/n/ac I tried resetting NVRAM but wifi didn’t work. Link to comment Share on other sites More sharing options...
Jazzoo Posted August 3, 2023 Share Posted August 3, 2023 You can provide the correct info about your Wifi/BT card or you can replace the working Wifi/BT kexts from your old EFI. It's up to you. Link to comment Share on other sites More sharing options...
ZainAnjum Posted August 3, 2023 Author Share Posted August 3, 2023 I replaced VoodooI2C,VoodooI2CHID and VoodooPS2Controller kexts from your EFI to my old EFI. Now everything is fine. Thanks for the help. Link to comment Share on other sites More sharing options...
Recommended Posts