realmadrid_cf Posted August 7, 2013 Share Posted August 7, 2013 this doesn't work either should I go back to voodoohda? thank you for your help please wait... i'm using old binary patch, hope its work. AppleHDA.kext.zip Link to comment Share on other sites More sharing options...
michyprima Posted August 7, 2013 Share Posted August 7, 2013 please wait... i using old binary patch, hope its work. sure, take your time! thanks again buddy Link to comment Share on other sites More sharing options...
realmadrid_cf Posted August 7, 2013 Share Posted August 7, 2013 sure, take your time! thanks again buddy i think it work with 10.8.3 Link to comment Share on other sites More sharing options...
michyprima Posted August 7, 2013 Share Posted August 7, 2013 i think it work with 10.8.3 I'm on 10.8.4 Link to comment Share on other sites More sharing options...
realmadrid_cf Posted August 7, 2013 Share Posted August 7, 2013 I'm on 10.8.4 test, if does'nt work, replace my attach AppleHDA to /Contents/MacOS. My friend laptop worked on 10.8.4 and 10.9 DP4 AppleHDA.zip Link to comment Share on other sites More sharing options...
michyprima Posted August 7, 2013 Share Posted August 7, 2013 test, if does'nt work, replace my attach AppleHDA to /Contents/MacOS. My friend laptop worked on 10.8.4 and 10.9 DP4 same result... this notebook is evil haha Link to comment Share on other sites More sharing options...
Gonzzo Posted August 8, 2013 Share Posted August 8, 2013 Test and feedback Gracias realmadrid for your efforts and time. I've tested but the kext doesn't load. What I've done is, based on the patched kext for the K55vm in EDP, I've generated a new one with the following setup (taking into account the info from codecgraph): Input: -Internal mic:9-34-18 -External mic:8-35-24 Output: -Speakers:20-13-3 -Headphones:33-12-2 and the codec verb following EMlyDinEsH guide: 01271C10 01271D01 01271EA6 01271F90 01471C20 01471D01 01471E13 01471F90 01871C30 01871D10 01871E81 01871F02 02171C40 02171D10 02171E21 02171F02 01470C02 and with the attached one it works like a charm. Since ALC270 also suffers the jack sense issue, it is required to activate the patch included in ElanTouchpad kext to avoid stop working after sleep. EMlyDinEsH, thanks for your guide. really helpfull. AppleHDA.kext.ALC270.zip Link to comment Share on other sites More sharing options...
michyprima Posted August 8, 2013 Share Posted August 8, 2013 hey it's me again... today I tried to do everything from scratch... that's my data: codec: alc269vb address: 0 vendorid: 0x10ec0269 && 283902569 pincomplex - controlname 0x18 : default 0x04a11830 0x19 : default 0x99a3093f 0x1b : default 0x99130110 0x1e : default 0x99430120 0x21 : default 0x0421101f ---------------------------- 0x18 : 30 18 a1 04 0x19 : 3f 09 a3 99 0x1b : 10 01 13 99 0x1e : 20 01 43 99 0x21 : 1f 10 21 04 ---------------------------- 0x18 : 10 10 a1 04 /// 0x08 -> 0x23 -> 0x18 /// 8 -> 35 -> 24 0x19 : 20 01 a3 99 /// 0x09 -> 0x22 -> 0x19 /// 9 -> 34 -> 25 0x1b : 30 01 13 99 /// 0x1b -> 0x0d -> 0x03 /// 27 -> 13 -> 3 0x1e : 40 01 43 99 /// 0x1e -> 0x06 -> ?? /// 30 -> 6 -> ??? 0x21 : 50 10 21 04 /// 0x21 -> 0x0c -> 0x02 /// 33 -> 12 -> 2 ---------------------------- 01871c10 01871d10 01871e81 01871f04 01971c20 01971d01 01971ea3 01971f99 01b71c30 01b71d01 01b71e13 01b71f99 01e71c40 01e71d01 01e71e43 01e71f99 02171c50 02171d10 02171e21 02171f04 but with those, I can't even get to desktop :/ please help! Link to comment Share on other sites More sharing options...
Gonzzo Posted August 8, 2013 Share Posted August 8, 2013 hey it's me again... today I tried to do everything from scratch... that's my data: codec: alc269vb address: 0 vendorid: 0x10ec0269 && 283902569 pincomplex - controlname 0x18 : default 0x04a11830 0x19 : default 0x99a3093f 0x1b : default 0x99130110 0x1e : default 0x99430120 0x21 : default 0x0421101f ---------------------------- 0x18 : 30 18 a1 04 0x19 : 3f 09 a3 99 0x1b : 10 01 13 99 0x1e : 20 01 43 99 0x21 : 1f 10 21 04 ---------------------------- 0x18 : 10 10 a1 04 /// 0x08 -> 0x23 -> 0x18 /// 8 -> 35 -> 24 0x19 : 20 01 a3 99 /// 0x09 -> 0x22 -> 0x19 /// 9 -> 34 -> 25 0x1b : 30 01 13 99 /// 0x1b -> 0x0d -> 0x03 /// 27 -> 13 -> 3 0x1e : 40 01 43 99 /// 0x1e -> 0x06 -> ?? /// 30 -> 6 -> ??? 0x21 : 50 10 21 04 /// 0x21 -> 0x0c -> 0x02 /// 33 -> 12 -> 2 ---------------------------- 01871c10 01871d10 01871e81 01871f04 01971c20 01971d01 01971ea3 01971f99 01b71c30 01b71d01 01b71e13 01b71f99 01e71c40 01e71d01 01e71e43 01e71f99 02171c50 02171d10 02171e21 02171f04 but with those, I can't even get to desktop :/ please help! I've done it just one time, so I'm not an expert, but my recommendation: - Start with a patched AppleHDA that at least loads and have something working (speaker, mic, etc ..). HAve you tried the one generated by Dinesh for 269? - From there, make incremental changes with one of the input or output and test the new patch to see if you have made any progress. - Use Codecgraph to better understand the different connections (I've generated one from your code_dump and attahced). The graph helped me a lot to try different paths and to correct the initial one I had partially working - If you're not going to use one of the input/outputs (like the SPDIF I've seen in your dump) or don't know how to implement it, disable it (F0 00 00 40) Good luck achivio.txt.svg.zip Link to comment Share on other sites More sharing options...
michyprima Posted August 9, 2013 Share Posted August 9, 2013 I've done it just one time, so I'm not an expert, but my recommendation: - Start with a patched AppleHDA that at least loads and have something working (speaker, mic, etc ..). HAve you tried the one generated by Dinesh for 269? - From there, make incremental changes with one of the input or output and test the new patch to see if you have made any progress. - Use Codecgraph to better understand the different connections (I've generated one from your code_dump and attahced). The graph helped me a lot to try different paths and to correct the initial one I had partially working - If you're not going to use one of the input/outputs (like the SPDIF I've seen in your dump) or don't know how to implement it, disable it (F0 00 00 40) Good luck achivio.txt.svg.zip hi, thanks for trying to help yes I tried it but had nothing working... I then tried the one for anerik70 which partially works. (mic only) I and anerik have identical paths, but still I can't hear anything from the speaker, and I can't understand why :/ Link to comment Share on other sites More sharing options...
Recommended Posts