Dell Latitude E5530 non-vPro, Intel Core i3-3110M Processor (3M Cache, 2.40 GHz)

[imydal]

See if this works too for the non-vpro system. Post your result please.

 

Thanks, works, but i add kext BCM5722D for my ethernet card because it is a bradcom.

 

Not works:

- wifi card

- sdhc reader card

 

Can you help me to identify what also not works?

Have you other suggest for my wifi card?

 

Thanks a lots 

Andrea

[Jake Lo]

Thanks, works, but i add kext BCM5722D for my ethernet card because it is a bradcom.

 

Not works:

- wifi card

- sdhc reader card

 

Can you help me to identify what also not works?

Have you other suggest for my wifi card?

 

Thanks a lots 

Andrea

open terminal and run lspci -nn, post the output here

most like you have an Intel Wireless card and will need to be replaced as it's not supported. Check here for compatible list.

as for sdhc reader, you can use voodoosdhc.kext. You might have to add your ven / dev ID to info.plist to work. Follow guide here.

things that won't work are:

finger scanner

smart card reader

vga port

[elleug]

Hi there,

 

I've just tested with the boot flags -v GraphicsEnabler=Yes IntelCapriFB=3 and I got a kernel panic, too. I use the myHack 3.3.1 general extra folder and added only the Broadcom LAN kext as mentioned above - there is actually a NullCPU... kext in the directory!

 

See the console output in the attached image file.

 

Greetings

Elleug

 

 

panic.jpg.zip

[imydal]

open terminal and run lspci -nn, post the output here

most like you have an Intel Wireless card and will need to be replaced as it's not supported. Check here for compatible list.

as for sdhc reader, you can use voodoosdhc.kext. You might have to add your ven / dev ID to info.plist to work. Follow guide here.

things that won't work are:

finger scanner

smart card reader

vga port

Here the result of terminal command:

pcilib: 0000:00:02.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.2 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 3 [8086:1e14] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 6 [8086:1e1a] (rev c4)
00:1c.6 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 7 [8086:1e1c] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e57] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04)
02:00.0 Network controller [0280]: Broadcom Corporation BCM43228 802.11a/b/g/n [14e4:4359]
0b:00.0 SD Host controller [0805]: O2 Micro, Inc. Unknown device [1217:8221] (rev 05)
0c:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)

I install voodoSDHC and it works, but i dont't understand how to install "airportd" 

i think thant the only thinks not work is 

wifi

bluetooth

 

Thanks 

Andrea

[pokenguyen]

yes you can delete AppleIntelCPUPowerManagement.kext or use nullcpu kext. ivy and haswell cores do not use it unless you use sandy machine smbios identifier and ssdt plus some modded plists. and yes if you replace kexts in Extra/Extensions folder you have to run myfix so it can transfer the kexts into kernel cache

IvyBridge system still uses AICPM to control power management by default, except you force kernel to control by "-xcpm" booo flag.

[Jake Lo]

Here the result of terminal command:

pcilib: 0000:00:02.0 64-bit device address ignored.
00:00.0 Host bridge [0600]: Intel Corporation Ivy Bridge DRAM Controller [8086:0154] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation Panther Point USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Panther Point MEI Controller #1 [8086:1e3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Panther Point High Definition Audio Controller [8086:1e20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 1 [8086:1e10] (rev c4)
00:1c.1 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 2 [8086:1e12] (rev c4)
00:1c.2 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 3 [8086:1e14] (rev c4)
00:1c.3 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 4 [8086:1e16] (rev c4)
00:1c.5 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 6 [8086:1e1a] (rev c4)
00:1c.6 PCI bridge [0604]: Intel Corporation Panther Point PCI Express Root Port 7 [8086:1e1c] (rev c4)
00:1d.0 USB controller [0c03]: Intel Corporation Panther Point USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1f.0 ISA bridge [0601]: Intel Corporation Panther Point LPC Controller [8086:1e57] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] [8086:1e03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Panther Point SMBus Controller [8086:1e22] (rev 04)
02:00.0 Network controller [0280]: Broadcom Corporation BCM43228 802.11a/b/g/n [14e4:4359]
0b:00.0 SD Host controller [0805]: O2 Micro, Inc. Unknown device [1217:8221] (rev 05)
0c:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10)

I install voodoSDHC and it works, but i dont't understand how to install "airportd" 

i think thant the only thinks not work is 

wifi

bluetooth

 

Thanks 

Andrea

airportd won't help with your wireless card as it's not supported.

[imydal]

Do you have a suggest for a kext for My wifi and bluetooth card?

[Jake Lo]

Do you have a suggest for a kext for My wifi and bluetooth card?

You have to replace the card, no kext will support it. Look for supported card from link I posted above.

[imydal]

You have to replace the card, no kext will support it. Look for supported card from link I posted above.

Ok thanks, i order The DW1510

 

I try The vodooSdhc kext but have a bug that avery sleep or reboot i have a Finder error, have you idea?

[Jake Lo]

Ok thanks, i order The DW1510

 

I try The vodooSdhc kext but have a bug that avery sleep or reboot i have a Finder error, have you idea?

did you follow instruction here to input you dev/vend ID?