Jump to content

Dell E6410 network issue


RobertB

Recommended Posts

I have a Dell E6410 running for some time now and from the beginning I have a issue with the LAN.

 

When I start the system LAn works just fine.

But when I'm transferring files from the Dell to my Mac Mini every now and then the transfer stops and also getting stuff from the WEB is not possible any more.

 

The LAn settings still seem to be the same.

 

The only option I have found is to restart the DELL and then the LAN works again.

 

Does any of you had this problem before and knows how to solve it?

 

I'm at 10.9.2

 

 

thanks,

 

 

 

Link to comment
Share on other sites

This is what the terminal command gives me:

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) 
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [NVS 3100M] [10de:0a6c] (rev a2)
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
03:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
04:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 03) 
04:00.4 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 03)
3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) 
3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)


That tis the one I have in my extra/extension folder version 2.5.4d

Link to comment
Share on other sites

  • Administrators

Sorry, your LAN interface is not listed there, only your wireless... Depending on your actual HW, you may want to try these other kexts, knowing that they may require patching to match your LAN card's PCI ids: AppleIntelE1000 or Intel82566MM.

Link to comment
Share on other sites

Sorry, your LAN interface is not listed there, only your wireless... Depending on your actual HW, you may want to try these other kexts, knowing that they may require patching to match your LAN card's PCI ids: AppleIntelE1000 or Intel82566MM.

 

In system profile under software/extensions I see that the AppleIntelE1000e is loaded but with version 1111 of 23/1113 00:42 YES Not Signed.

 

Could it bee that the system does load a wrong version from a other position?

Is it the right version 1111 <> 2.5.4d?

 

thanks,

 

 

In the System/Library/Extensions folder I do not see this kext

Link to comment
Share on other sites

  • Administrators

Kexts placed in /E/E always get re-labelled with v1111 by myHack once copied in Plugins subfolder of /S/L/E/mlyHack.kext. That's how kexts placed in /E/E can supersede vanilla kexts of the same name in /S/L/E. In the presence of 2 identical kexts, OS X will actually load the driver that holds the highest version number.

 

The original version of "your" kexts is still visible directly from the kext in /E/E.

Link to comment
Share on other sites

×
×
  • Create New...