howoarang Posted August 8, 2014 Author Share Posted August 8, 2014 Ok, maybe I have corrupt DP1 with some errors, because I tried extract kernel from it using Pacifist.app and it doesnt go. So I must download kernel from net. Anyway I appreciate your work and I will trying also how to 10.10 for e6500. Link to comment Share on other sites More sharing options...
krzysztofc10 Posted August 8, 2014 Share Posted August 8, 2014 Tkanks I can suggest to format your flash drive and make one more time bootable USB copy latest EXTRA and everything will be Okey I think boot with -f -V and wait setup will run Link to comment Share on other sites More sharing options...
krzysztofc10 Posted August 8, 2014 Share Posted August 8, 2014 Without Flags you have FakeSmc issue. I don't boot with -x it's not necessary and I don't copy kernel, Kernel is unpacking itself with this installer. You have Yosemite ready to boot with it And you only need copy your Extra to root of your USB. So try again maybe something goes wrong at the first time In Chameleonboot.plist you can change your resolution to 1920x1200 for your display. And booting OSX installer hangs at some points but In a while it goes ahead Try again with the Extra that I've uploaded for you in previous post Link to comment Share on other sites More sharing options...
howoarang Posted August 8, 2014 Author Share Posted August 8, 2014 Ok. I will try it once again later, but have two more questions: - the USB must be formated as MBR or as GUID? I think as MBR, because usb.pkg installer is for MBR, right? - what version of BIOS you have? I have A29. thanks. Link to comment Share on other sites More sharing options...
krzysztofc10 Posted August 8, 2014 Share Posted August 8, 2014 I have A34 And I formated it as GUID. Link to comment Share on other sites More sharing options...
howoarang Posted August 9, 2014 Author Share Posted August 9, 2014 OK, I checked dell support and these are the latest BIOS for latitude: for e6400 is A34 for e6500 is A29 boot have the same release date 7/16/2013, so I think, these BIOS are very similar. You have partition as GUID, ok, but it is for installed Yosemite or for prepared USB yosemite installer? Link to comment Share on other sites More sharing options...
krzysztofc10 Posted August 9, 2014 Share Posted August 9, 2014 I've set GUID on bootable USB installer and On Yosemite partition Link to comment Share on other sites More sharing options...
howoarang Posted August 9, 2014 Author Share Posted August 9, 2014 OK thanks. I'm going to prepare USB installer again Link to comment Share on other sites More sharing options...
krzysztofc10 Posted August 9, 2014 Share Posted August 9, 2014 Proof here I've done everything like I write In Guide Link to comment Share on other sites More sharing options...
howoarang Posted August 9, 2014 Author Share Posted August 9, 2014 Hi, with your kexts, I have finished installation DP1 but I must to boot with flags -v -f -x and kexts must be copied in S/L/E folder too. With these steps, USB installer does boot and I can install DP1. But installed DP1 won't boot. I tried to install chameleon r2380 and r2391, use same kext, boot with flags -f -v -x, but no luck Also I used myhack FULL, still wont boot Link to comment Share on other sites More sharing options...
Recommended Posts