loibi93 Posted September 8, 2014 Share Posted September 8, 2014 Hello !I installed Yosemite today, and everything works fine, but i still have to boot with my USB Pen Drive !I installed Clover first with ESP Method and after that not working with boot0af Method. I always get this error: GPT: boot0 error GPT: boot0 error GPT: boot0 error GPT: boot0 error I also tried the solution with unmounting the drive and then in terminal: dd if=/..... Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted September 8, 2014 Administrators Share Posted September 8, 2014 try having diskutility repair the EFI partition by selecting the main drive and do a repair after that retry installing clover to EFI of the drive. Link to comment Share on other sites More sharing options...
loibi93 Posted September 9, 2014 Author Share Posted September 9, 2014 I solved it by booting my backup, erasing the drive, partitioned it with mbr and then guid and installed clover again. After that i installed Yosemite again. Link to comment Share on other sites More sharing options...
luc vanel Posted January 6, 2016 Share Posted January 6, 2016 can sombody help me here same problem Link to comment Share on other sites More sharing options...
polyzargone Posted January 26, 2016 Share Posted January 26, 2016 Seems like you have an old version of Chameleon somewhere on your drive. If you're still using partition scheme, you can try to erase the whole EFI partition (after backing up its content i.e. existing EFI folder) then reinstall Clover on it. To do so, just open a terminal and type : diskutil list then sudo newfs_msdos -v EFI -F 32 /dev/rdiskXsY Where X and Y are the numbers of your EFI partition. You may also have to try different options in the Clover installer : Link to comment Share on other sites More sharing options...
Recommended Posts