Jump to content

E5440 intel I5 4300U with Clover


StrongOak
 Share

Recommended Posts

So after much reading and using the E5440 supplied DSDT here and the I5-4300U SDST also supplied here and copying the kexts from the guys 5540 pack into the Clover Kexts folder and putting the DSDT and SDST into the ACPI/patched folder (per clover instructions). The installer boots from USB (doesn't loose access to root anymore as it was) and now gets to these lines:

 

init

probe

start

DSMOS has arrived

[iOBluetoothHCIController][start] -- completed

 

a half second later the laptop reboots

 

Notes:

BIOS is set:

BIOS Version A07

UEFI, Secure boot off

Legacy Roms off

SATA AHCI

Miscellaneous Devices all off (for install, this is card reader, camera, microphone, express card slot)

Speedstep is off

Turboboost is off

Intel VT on, but Intel VT-d off

 

Graphics: NVidia GT 720M, Intel HD4400

HDD in system is brand new and blank with no partitions

 

Attached is a zip of my Clover EFI partition (figure its easier than attached each file as asked)

 

Any help appreciated

E5440 EFI Boot Partition.zip

Link to comment
Share on other sites

  • Moderators

Is there anything under Video?

For the E6520 and E6530, there's an option to enable/disable Optimus under Video.

If not, I guess you'll need to disable nvidia with DSDT edits.

I don't use Clover, but can you disable nvidia, and use IntelAzulFB=12 (HD 4400) in config.plist?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...