beachandbytes Posted April 3, 2015 Share Posted April 3, 2015 Hey, I've followed your guides for quite a while never having problems since maverick. I must say amazing! I would never have a setup like this without your guided and bootpacks. I am running Latitude E6430 with BIOS A12 | i5 3320M 2.6Ghz | 16GB DDR3 |Intel HD 4000 | 1366x768 BIOS A12 | i5-3320M 2.6 GHz | 4GB DDR3 | Intel HD 4000, 1366x768 Everything is working fine except I have to use -v -f to get to full boot. Otherwise it hangs up on AppleIntelCPUPowerManagement : Turbo Ratios 0057 AppleIntelCPUPowerManagement : ( built 00:11:36 Sept 19 2014) Initilization .. RTC: Only single RAM bank (128 bytes) Then it just hangs. Not sure what to do, any help would be appreciated. Btw thank you Jake Low for making such awesome guides, even with having to boot with -v -f it is running great! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 3, 2015 Administrators Share Posted April 3, 2015 Are you using a SSDT file generated for your specific i5-3320M CPU? If not, you're highly likely to encounter CPU power management issues for sure. You can generate your own SSDT using the well-known generator script. It's available from Piker's or RampageDev's blogs. You'll easily find it along with full instructions. Then, to avoid the need to boot without cache (-f flag), I suggest you manually rebuilt your kext cache. From Terminal, run the following commands: sudo touch /System/Library/Extensions sudo kextcache -Boot -U / Of course, make sure to boot with the option kext-dev-mode=1. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 3, 2015 Moderators Share Posted April 3, 2015 beachandbytes, Are you having issue with Mavericks or Yosemite? Link to comment Share on other sites More sharing options...
beachandbytes Posted April 5, 2015 Author Share Posted April 5, 2015 I generated the SSDT file for the specific processor using the instructions in Jake Lo's guide. This is for Yosemite 10.10.2 Link to comment Share on other sites More sharing options...
beachandbytes Posted April 8, 2015 Author Share Posted April 8, 2015 Just thought I would update this, I played around with all the boot settings and ended up screwing things up far more then fixing them. Since this was still a fairly fresh install I just decided to do it over and pay extra careful attention to the steps. Not sure what I did different this time around but everything is booting fine without the -f flag. Once again thank you for the great guides Jake Lo, you the man! Link to comment Share on other sites More sharing options...
Recommended Posts