viveknarayan Posted April 3, 2015 Share Posted April 3, 2015 installer stuck at apple logo. i have used all flags. when using -v the screen goes black processor i5 4460 mobo gigabyte B85m-d3h kingston ssd Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 3, 2015 Moderators Share Posted April 3, 2015 Haswell is supported from OS X 10.8.5 and up. You'll need a patched Kernel for you Haswell processor. Just google for it. Assuming you're using Chameleon and no other graphics card, boot with -v -f IntelAzulFB=12 Link to comment Share on other sites More sharing options...
viveknarayan Posted April 3, 2015 Author Share Posted April 3, 2015 sorry i didn't mentioned graphic card. it's nvdia g force 610 series (zotec) it is tower Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 6, 2015 Administrators Share Posted April 6, 2015 Check your BIOS for graphics card selection, then boot with Chameleon option GraphicsEnabler=Yes Link to comment Share on other sites More sharing options...
viveknarayan Posted April 7, 2015 Author Share Posted April 7, 2015 I tried that and no luck yet. In Verbose mode i found out it goes black after Starting Darwin x86_64 Boot Args: boot-uuid=B729AB85-1DAA-3C28-80F2-73EF45741B51 rd=*uuid -v after which screen goes black any solution would be appreciated. thanks Link to comment Share on other sites More sharing options...
viveknarayan Posted April 11, 2015 Author Share Posted April 11, 2015 at last i succeeded in installing mac by copying mach_kernel from another system same ml 10.8.5 to installer and patched it. On reboot -x flag solved the problem Thanks to all for ur infos re patching kernel. It is now booting in safe mode. any ideas what shall i do to make it fully functional. thanks again Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted April 12, 2015 Moderators Share Posted April 12, 2015 Which graphics card does it show in System Information when you booted in SafeMode? Have you tried booting with the flags -f -v GraphicsEnabler=Yes or -f -v GraphicsEnaber=No Link to comment Share on other sites More sharing options...
viveknarayan Posted April 13, 2015 Author Share Posted April 13, 2015 I have tried those flags. Same result sys. info. Graphics Zotec GeForce GT 610 2048 MB while booting in verbose mode last two lines warning : IOPlatformPluginUtil :this is unknown CPU model 0x3c --power management may be incomplete or unsupported thanks Link to comment Share on other sites More sharing options...
Administrators Hervé Posted April 13, 2015 Administrators Share Posted April 13, 2015 nVidia GeForce GT610 is only supported in ML from 10.8.3 (or was it 10.8.2), so make sure you've installed at least that version. Then it normally works OOB. Link to comment Share on other sites More sharing options...
viveknarayan Posted April 13, 2015 Author Share Posted April 13, 2015 thanks but i have seen ml 10.8.5 with GT610 working fine with one of my friend having the same configuration as mine. he is a new to this somebody had helped him in installing Link to comment Share on other sites More sharing options...
Recommended Posts