howoarang Posted December 20, 2015 Author Share Posted December 20, 2015 Hi, yes I see it, that there are no USB 3.0 in DSDT, but I don't remove it. Missing USB 3.0 are in my own extracted DSDT.aml and also in DSDT.aml which I downloaded on web. I found some progress with USB 3.0 (pci1033,194) In 10.10 Yosemite I used GenericUSBXHCI.kext to work USB 3.0 and in YOS_m4600.ioreg file I found this USB 3.0 port under RP04 section. (PXSX@0) So, RP04 section is also under 10.11 El Capitan, but there are no other informations. (ELC_m4600.ioreg) I think, that GenericUSBXHCI or AppleUBSXHCI must be edited to load properly. IOREG.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 20, 2015 Moderators Share Posted December 20, 2015 Try latest version of GenericUSBXHCI Link to comment Share on other sites More sharing options...
howoarang Posted December 21, 2015 Author Share Posted December 21, 2015 I tried it, but still USB 3.0 doesn't work. Link to comment Share on other sites More sharing options...
DuongTH Posted December 22, 2015 Share Posted December 22, 2015 Hi, I would like to ask for some help with M4600. Now I have El Capitan 10.11 installed, but my USB 3.0 ports don't work. So could somebody help with it? And also I need help with Intel speedstep. Now I must use NULLCPU kext to run OSX, otherwise got kernel panic. The previous AICPU patch doesn't work. use SMBIOS MBP10.1 and remove nullCPU to solve black screen issue - it work on my K43Sj (only GT520M). + about USB 3.0 on El Capitan work only on intel XHCI module, never work on 3rd party. M4600 use NEC XHCI module - i'm so sorry. 1 Link to comment Share on other sites More sharing options...
howoarang Posted December 22, 2015 Author Share Posted December 22, 2015 - You are Great Man, with SMBIOS MBP10.1 and without nullCPU now it works. Thanks for it!- about USB 3.0, I will wait for some patches, I hope it will be develop Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 23, 2015 Moderators Share Posted December 23, 2015 See here Link to comment Share on other sites More sharing options...
howoarang Posted December 23, 2015 Author Share Posted December 23, 2015 I tried newest GenericUSBXHCI.kext but USB 3.0 still doesn't work and wasn't recognized. But I think, problem is in my DSDT.aml, because there are no sections with USB 3.0 Link to comment Share on other sites More sharing options...
DuongTH Posted December 23, 2015 Share Posted December 23, 2015 - You are Great Man, with SMBIOS MBP10.1 and without nullCPU now it works. Thanks for it! - about USB 3.0, I will wait for some patches, I hope it will be develop you are welcome. i'm a nVidia hackintosher Bonus: and you can change SMBIOS to MBP6.2 but Board-id is MBP 10.1 to make Full SpeedStep like this: i5 2410M and this: and this: And if you want your nVidia Graphics run with best performance you must inject AGPM on FakeSMC. remember not only CPU have Speedstep but also GPU have Speedstep too (min is 2 step max is 4-6 step). See here trust me ! not change anything. Link to comment Share on other sites More sharing options...
howoarang Posted December 23, 2015 Author Share Posted December 23, 2015 OK, now: + with SMBIOS 10.1 and without nullCPU I have these results: Clock multiplier 23x - 33x (2,3GHz - 3,4GHz) + with SMBIOS 6.1 8x-33x (800MHz - 3,4GHz) If I had nullCPU in Clover/kext/10.11, CPU frequencies were only these two: 800MHz and 2,3GHz. So now, CPU has higher frequencies and also got better Geekbenchmark score. My 1st question is, from which application is your "log" with Pstates? I think it is from DPCIManager, but this log doesn't work under 10.11 El Capitan. My 2nd question is, how to inject AGPM on FakeSMC. My notebook can boot with this DSDT.aml only (I found it somewhere in this forum). There are applies some patches and also, there is section about GPU nvidia which is pasted from SSDT for GPU. I tried to extract my own DSDT.aml and applied some patches, but system can't boot or boot but whit black screen. DSDT.aml.zip Link to comment Share on other sites More sharing options...
DuongTH Posted December 24, 2015 Share Posted December 24, 2015 + your CPU is 800-2300Mhz is normal frequencies 2400-3300Mhz is turbo frequencies. OS X never show turbo frequencies on About this mac.+ remember "nullCPU = never enable Speedstep", and clover never use nullCPU because we have AsusAICpuM patch on Config.+ patch your DSDT to enable Full Speedstep - apply all system patch (if patch have multi version -> use lastest version). 1st research AppleIntelCPUManagementInfo.kext2nd try research LegacyAGPM.kext or refer my K43SJ Clover Pack Link to comment Share on other sites More sharing options...
Recommended Posts