victor27rs Posted May 18, 2016 Author Share Posted May 18, 2016 Exactly, I'm using keyboard and external mouse.Yes, I have voodoops2controller.kext in / EFI / Clover / Kexts / OtherSo the only kext I had to put in / Library / Extension is the audio, right? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 18, 2016 Moderators Share Posted May 18, 2016 AppleHDA_ALC255 and CodecCommander. Update the battery kext with this to Clover/Other Link to comment Share on other sites More sharing options...
victor27rs Posted May 18, 2016 Author Share Posted May 18, 2016 I put this update, but did not work Link to comment Share on other sites More sharing options...
victor27rs Posted May 18, 2016 Author Share Posted May 18, 2016 Now the keyboard backlights are always on, but the keyboard and the touchpad still does not work Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 19, 2016 Moderators Share Posted May 19, 2016 I think your system has a Synaptics touchpad but I can't be sure. YOu'll have to check it yourself since I don't have the hardware. Try replacing it with this latest kext. Link to comment Share on other sites More sharing options...
victor27rs Posted May 19, 2016 Author Share Posted May 19, 2016 I put but did not work Link to comment Share on other sites More sharing options...
arhu Posted May 27, 2016 Share Posted May 27, 2016 After some time I have to back to OSX, so I have to install it again. I lost all my files and I really don't remember how It worked. For now It hangs on kernel panic "IntelFramebuffer etc". I remember that there was some weird workaround. Look at my files. CLOVER.zip Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted May 27, 2016 Administrators Share Posted May 27, 2016 tried some of your older config files you posted in the first couple of pages? Link to comment Share on other sites More sharing options...
arhu Posted May 28, 2016 Share Posted May 28, 2016 I tried every config, but It didn't work. When I back home I try to patch bios. But I would like to ask, could you to patch my SSDT? I uploaded it in my last post. @edit: I have one question about patching bios. I opened same settings (look at attached image) and my value "dedicated video memory" is equal to 128mb, so I have to patch it to 96mb? Right? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 28, 2016 Moderators Share Posted May 28, 2016 Bootpack can be found here, make sure to replace DSDT with the updated one with Batteryfix. For the DVMT pre-allocation, set it to 96MB in EFI shell, check the prerequisite instruction here. If you find that your BIOS is locked and can be edited, then the Clover hot-patch is not working as you do have it in your Config file, then only option is to manually patch the FB. Link to comment Share on other sites More sharing options...
Recommended Posts