TheRobster5555 Posted December 3, 2017 Author Share Posted December 3, 2017 Tried doing that, same error Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 3, 2017 Administrators Share Posted December 3, 2017 If you want to boot without cache, you need to use boot options KernelBooter_kexts=Yes -f. Kexts will then load from /E/E because /L/E is ignored when booting without cache. You may add -v for verbose mode. This error message is due to an incorrect or missing cache/prelinked kernel. So, once you've booted up, rebuild you cache/prelinked kernel. Refer to the FAQ forum section for guidance. Link to comment Share on other sites More sharing options...
TheRobster5555 Posted December 4, 2017 Author Share Posted December 4, 2017 Btw I've got the doc div and usb working in Sierra just fine, no issues whatsoever! So you can add the dock to supported Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 4, 2017 Administrators Share Posted December 4, 2017 It's been known for quite some time... Link to comment Share on other sites More sharing options...
TheRobster5555 Posted December 13, 2017 Author Share Posted December 13, 2017 I also found another thing that works; the 2nd HDD caddy works, and picks up my drive and partitions just fine! Link to comment Share on other sites More sharing options...
Administrators Hervé Posted December 13, 2017 Administrators Share Posted December 13, 2017 Yes, we all know that too; it's a rather old machine that has been discussed under all possible angles many many years ago you know. 'not sure we need to revisit it all again.... Link to comment Share on other sites More sharing options...
TheRobster5555 Posted December 13, 2017 Author Share Posted December 13, 2017 Sorry, was just going over the list of supported/unsupported stuff on your guide to see what was tested and what was not. Link to comment Share on other sites More sharing options...
Recommended Posts