eC//FrEaK

Hey guys.. me again...

 

@Jake Lo or @Hervé ...

 

After I upgraded to 10.14.3 my sleep does not seem to work any.more ... 

 

Do you guys may have an idea why?

@jason.bowman9215That HP power supply will never really load an DELL battery plugged into a DELL system.

 

Well, usually the BIOS should report to you that you have plugged in at least an "unknown" power supply.

In this case the electronics is switched to only power the main system, and to not load the battery.

On 1/8/2019 at 5:57 PM, Bronxteck said:

legacy option made no difference on the 9710

Umm... this is really strange...

1 hour ago, tonykai said:

2,When click 'sleeping' button under Mojave system tools , system haven't anything response.

 

by the way:

There are blow these files under Kexts folder :

AirportBrcmFixup.kext

AppleHDADisabler.kext

ApplePS2SmartTouchPad.kext

BrcmFirmwareData.kext

BrcmPatchRAM2.kext

FakePCIID.kext

FakePCIID_Broadcom_WiFi.kext

FakeSMC.kext

IntelMausiEthernet.kext

Lilu.kext

NullCPUPowerManagement.kext

IntelGraphicsDVMTFixup.kext

USBInjectAll.kext

VoodooHDA.kext

VoodooPS2Controller.kext

WhateverGreen.kext

This is too much stuff...  I would suggest the following...

 

AirportBrcmFixup.kext --> ok

AppleHDADisabler.kext remove, use AppleALC.kext instead, use bootarg "alcid=layout-id" (your may find your correct layout-id here)

ApplePS2SmartTouchPad.kext maybe removed, since you are using VooDooPS2controller.kext

BrcmFirmwareData.kext --> ok

BrcmPatchRAM2.kext --> remove clover folder and install it to S/L/E

FakePCIID.kext --> remove from clover folder and install it to S/L/E

FakePCIID_Broadcom_WiFi.kext --> ok

FakeSMC.kext --> ok

IntelMausiEthernet.kext --> ok

Lilu.kext --> check version, should be 1.3.1

NullCPUPowerManagement.kext --> remove, enable CPU power management in clover config.plist 

IntelGraphicsDVMTFixup.kext --> remove, this job is now done by Whatevergreen.kext

USBInjectAll.kext --> ok

VoodooHDA.kext --> remove, use AppleALC.kext instead

VoodooPS2Controller.kext --> ok

WhateverGreen.kext --> check version, should be 1.2.6

 

And, add those CPU related kexts from FakeSMC... (I'll mark them in the following list)

 

Well, your clover folder should then look like...

The purple ones have to be added.

 

AirportBrcmFixup.kext

AppleALC.kext --> latest version

BrcmFirmwareData.kext

FakePCIID_Broadcom_WiFi.kext

FakeSMC.kext

FakeSMC_ACPISensors.kext

FakeSMC_CPUSensors.kext

FakeSMC_GPUSensors.kext

FakeSMC_LPCSensors.kext

FakeSMC_SMMSensors.kext

IntelMausiEthernet.kext

Lilu.kext

USBInjectAll.kext

VoodooPS2Controller.kext

WhateverGreen.kext

 

Do not forget to install FakePCIID.kext & BrcmPatchRAM2.kext into S/L/E.

 

To enable native CPUPM search for "AppleIntelCPUPM" in your "config.plist" and change it from "false" to "true" .. should be then look like this...

 

 

I hope, this helps!  Since I'm new on supporting hackintosh... I'm open for criticism from our forum elite.

 

16 hours ago, jason.bowman9215 said:

I checked out the settings in the BIOS and all of the charging settings seem to be standard(A11 BIOS).

Why are you on such a low BIOS revision?  DELL just released revision A21 a few days ago. I think it would be a good idea to update your BIOS first. You can do this even with a bootable USB drive using FreeDOS.

I mainly use RUFUS to create that USB drive. Then put the BIOS executable on the drive, boot it up, run the BIOS executable and flash your BIOS. As @Hervé states below, this maybe not such an good idea.. My fault...

 

16 hours ago, jason.bowman9215 said:

I got a new one

Is that new one an original DELL battery, or is it a third party device? Sometimes the electronics of third party batteries doe not send accurate data.

What kind of Wi-Fi Card is inside your system? If it is an Intel Card... forget about it. There are no fully working Intel Wi-Fi drivers available for macOS.

 

Have a look at this forum post to determine which cards a compatible.

Quick update....

 

I just upgraded the T1650 to Mojave 10.14.3 Beta. No problems at all.

4 hours ago, Bronxteck said:

I tried a Asus GT640 on a Precision 9710 and it said metal supported. only issue I had was that I believe the 9710 needs an UEFI flashed rom video card as I had no graphics at all until it was in OS. the factory NVS 310 gave me GUI interface because of UEFI bios but it is not metal supported.

 

You need to enable "legacy boot roms" in the BIOS. This enables the UEFI-CSM. You'll have graphics output throughout the whole boot process.

 

My GTX650Ti has also no UEFI bios.

Good morning.

 

It would be nice to know more of your system specs, to build a proper boot pack.

At least, what kind of WiFi + BT card and LOM card is used in you system. 

I'm using a GeForce GTX650Ti in my T1650... full metal support is given on Mojave... Any GeFore 600 Series card (Kepler chipset) will work. Some of the GeForce 700 Series cards are also using a Kepler chipset and will work.

You can use Google/Wikipedia to look for a suitable card, any Kepler based card will work. Codename GKxxx.

Or, look at the official Apple Graphics Support Document ... --> https://support.apple.com/en-us/HT208898

Umm... looks like your pendrive you use for the installation is faulty?

Maybe you could try another one?

 

Just wanted to share that I was successful on installing Mojave 10.14.2 on a Precision T1650.

 

This system was shipped with an Intel i3-3220, I was not able to get the iGPU (HD2500) working correctly after installing macOS.

I just got a flickering screen with a mouse cursor shown, the only way to get some screen output was booting with "-x".

Therefore I decided to put my old Geforce GTX650Ti into the system to get at least some metal support.

 

Now the. system is working perfectly.

 

For everyone else, I attached my CLOVER folder. Feel free to use it for your own build.  

CLOVER_Precision_T1650.zip

On 1/6/2019 at 4:13 AM, Jake Lo said:

Give this a try, replace into /EFI/Clover

E5530_Mojave.zip

Thanks for your more modified "config.plist", with your config my graphical issues during boot are gone away.

One (hopefully) last thing...

 

I'm experiencing some graphical issues during boot, after clover exits apple logo is shown with loading bar, at the time the bar reaches its end everything goes messed for about 2-3 seconds until the apple logo is shown again and seconds after I get to the login screen.

 

Is there any way to fix this? 

- removed NullCPUPM, set AppleIntelCPUPM as "true" in config.plist

- Graphics was fine without WEG, added it.. nothing changed so far...

- ACPIBattery I had added in the meantime, knowing how much battery is left is always good

- VoodooHDA even was replaced in the meantime with your discribed solution.

- HDMI Video was working without WEG, can test this next year again with WEG applied.

Hey Hervé.

 

Thanks for your post and the given hints.

 

Card reader is now working with a patched kext, touchpad works fine with Dr. Hurt's R6 VoodooPS2Controller.kext.

The "sleep" was even working without attached PowerSupply and was only buggy with attached PowerSupply. Disabling the "Wake on AC" option in the BIOS now even let's the sleep work correctly with attached power supply.

 

One last question, if everything is now working fine for me, I do really need no further DSDT/SSDT patching?!?!

 

 

Hi folks.

 

Last year I had an E5520 working with Sierra, today I managed ist to install and use 10.14.2 on a E5530 (i5 3220M).

 

What is working?

 - WiFi, replaced origin Intel Card with an AR9285 based card (168c:002b) - the same I used in the E5520

 - Ethernet, used "FakePCIID_BCM57XX_as_BCM57765.kext", just had to add my pciID in "info.plist" (14e4:1681)

 - Graphics, INTEL HD4000 fully accelerated, I think it is because of FakePCIID_Intel_HD

 - Sound, VoodooHDA

 - Keyboard, VoodooPS2

 - SSD Trim (enabled it via "sudo trimforce enable")

 

What is not working?

 - SD-Card Reader

 - Touchpad + Touchpad-Buttons, VoodooPS2 only enables the Keyboard

 - Sleep, just goes into Sleep for about 1 second and than it powers up again (no user interaction)

 

I must say that I have done this all with no patched DSDT or SSDT... Just only kext's are used.

I'll attach my Clover folder.... maybe somebody can help me patching those files?

 

Thanks in advance!

CLOVER.zip

Hey Jake... 

 

Damn... looks like I've been pleased too early... I was convinced everything is ok after I saw in in terminal (ifconfig) that my mac address wasn't zeroed. And in system-information app I saw that the card is recognised correctly... Unfortunately I didn't had a ethernet cable yesterday to check if a real connection is working... today I tested it and it is not working... :'( the link on the cable is not recognised...

 

I'll dig deeper on this and will keep you informed here...

 

Well, three additional things I have to add... (the last one is a good thing)

 

1. I get some ACPI errors, mostly when I boot on battery power (see attached photo)

2. video playback with vlc is laggy, with quicktime it is fluently (HD video recorded with iPhone 6)

3. i modded my E5520 with a keyboard from a Precision M4300... it works (just done this because of the backlight) 

Worked! But I needed three attempts. 

 

First I installed the kexts in S/L/E... *dump* (read first, then ask )

 

After I put them to L/E it neither worked... until I looked into the "info.plist" of "FakePCIID_BCM57XX_as_BCM57765.kext" ... my device ID was not listed there I just added my device ID "pci14e4,1681" and after the next boot all went fine.

Just add FakePCIID_BCM57XX_as_BCM57765.kext and FakePCIID.kext to /Library/Extensions and fix permission and rebuild cache.

You might have to remove  BCM5722D.kext first.

Really? That easy? 

Ok, i'll give it a try. I'll be using KextUtility for this. That might be ok, or not?

Hey Jake.

 

"With the new files, is Ethernet fixed now too?"

  - no, ethernet has zeroed mac on every second boot, but idk since wifi is working.

    maybe this will work correct with that "FakePCIID_BCM57XX_as_BCM57765.kext" of rehabman?

    unfortunately i do not really unterstand how to implement that FakePCIID stuff  

 

"Sleep works with Lid close and wakes opening Lid?"

  - yes, sleep works perfect now

Great! Now everything works flawless! I'm happy now! 

 

Thank you very much!!!

 

(Thread can be marked as solved)

Good morning.

 

Well, I did all the modifications you mentioned... some things went good, some things are bad now...

 

good things:

   - SD-Card Controller is now working (first time ever)

   - no further system lags, system now runs a bit more fluently (it feels like)

   - CPU now is throttling down correct, P/C states seem to be implemented correctly

 

bad things:

   - audio stopped working (maybe of before installed VoodooHDA 2.8.8 package? I removed that kext... but no success) - got it

   - usb stopped working

 

Do you have any suggestions for the "bad" things?

Hey Jake.

 

Thx for your work so far. I'll have a deeper look into + testing your package tommorrow.

 

But before ii do this 2 questions...

 

1. the kexts from the /kexts/other/LE folder... do i have to put them in my local L/E on the HDD?

2. i can not use one of the SSDT clover extratcted? (origin folder in my attachment, they are from my current system)

 

Well, need to sleep now... gn8.

Hey madmax,

 

i have the following hardware configuration (copied and edited your signature ):

 

 

macOS Sierra 10.12.3 / with Clover build 4012 (legacy boot)

 

Dell Latitude E5520

Processor: Intel Core i3-2310M, 2.1 GHz

Chipset: Intel 6 Series

Graphics: Intel HD3000

Display: 1366x768 WXGA

RAM: 4GB DDR3, 1333 MHz

HDD: TOSHIBA HDD MK2561GSY

WiFi: Qualcomm Atheros AR9285 Half-Mini PCIe