roniez
-
Posts
59 -
Joined
-
Last visited
Content Type
Profiles
Articles, News and Tips
Forums
Posts posted by roniez
-
-
Still get a KP using ur config.plist and HFSPlus.efi
i will retry the installation and use APFS as format.
-
if i use that all entries in clover boot disapears and it only shows a windows installation that is present on another disk.
i just copy and replaced the existing config.plist in the USB Installer - EFI Partition and when i do that all entries disappear.
-
-
When using that bootpack that u linked and when i open Clover Configurator under Kernel and KextPatches its completly empty.
is that correct?
My progress so far.
-Created new USB Installer (High Sierra) as per current documentation.
-Installed clover as per documentation.
-Added Generic EFI + EFI u suggested.
-Ran Clover Configuration (checked FixHeaders)
Then went to Kernel & Kext Patches but here its completely empty (no patches listed).
- Installation is running currently will post result later.
- Installation finish, but when booting from usb installer and then choosing "Boot macOS from macOS" it starts to load and and all of the sudden it reboots on me.
It looks like i get a Kernel Panic - How can i save the bootlog?
any suggestion?
-
So with that EFI folder do i need to use the "default" efi bootpack from post #2? from the regular guide or just that EFI folder?
-
Anybody have a link to a function bootpack for High Sierra for a Dell Latitude E6530 (Optimus) A13 Bios ?
I have not yet found 1 with a working guide.
-
With the E7440 on 10.13.3 the combo port works if you reboot and leave the headphones plugged in (before A21 BIOS in my case)
Unfortuently that did not work for me.
-
Hello.
Has anybody got the combo plug (headphones/mic) or (headphones/line in) to work properly?
when i connect a mobile phone headset it's not recognizing the microphone part of it.
It only recognized the headphones.
as far as i can see the appleACL should support the E7450 but i have no clue if that is the model without discreet graphics.
-
Dunno what happend but after a few restarts and leaving it alone for almost a day it now works fine when connecting miniDP.
And i am currently using your config u sent/uploaded.
-
Can add that the Hdmi out works fine although I have not tested audio via HDMI
-
Hello Jake.
unfortunately that did not work for me at all.
It even went backwords i think because now i don't even get the noice as something has been plugged in or plugged out. (attach and detach sound)I have provided the debug logs.
-
Here is the debug zip i hope this helps.
Can also mention that the smart card reader actually works on my device.
-
I have gotten the mac OS High Sierra 10.13.3 installed successfully with the help of Jake Lo and crew.
and following the guide on the forum.
However the guide says minidp is working but for me its not.
When i connect a minidp to dp cable to the port the laptop screen starts to react like it should activate a 2nd screen or mirror.
Same thing happens on the monitor it reads an input from the cable and turns on but after 5 seconds the screen on the laptop will act like the cable is being disconnected and flicker again and it starts the process over.
Does anybody have any clue where to look to solve this?
-
Will try it now, yes the bios is A17
Looks to be working thx a bunch. will post later
So installation is now done, but it does not seem to recognice my WiFI.
its a Broadcom DW1560nvm that was solved by rebooting after moving the KEXT's now it recognices the wifi perfectly.
-
Unfortuently that did not work either got to the same screen.
The SSDT u gave me i think has errors in it.
I have also attached my EFI (boot+clover) and in misc folder u can find a preboot.log
See screenshot attached.
-
Which SSDT?
i copied all contents from E7450_Disable840M_A17_HS to EFI/CLOVER
-
I have Clover 4334... its already the latest.
Do you have any ideas?
Im trying to install 10.13.2
I tried booting with enables legacy options and now i can see the error messages at the end.
Its complaining about the windowserver..
Would it help to send a DSDT i extracted in Linux?
I get the exact same issue as you are experiencing but i am using 10.3.3 HighSierra.app
I have added the following
+ Generic EFI
+ E7450_Disable840M_A17_HS
+ Clover V2.4k r4411 is installed
+ Lilu.kext 1.2.2
+ dvmt set to 96mb
Here is my origin.zip
Any ideas?
-
I updated clover to latest version before installation macOS 10.12.4
-
Hello.
Some issues i am experiancing currently after following the guide provided on the forum and witch patches installed from
and
Now when i boot up the laptop when attached to dock it will not enable WiFi when i undock.
this also occurs when i boot the laptop undocked and then attach to dock, wifi will remain enabled but it will not handoff back to wifi from ethernet from docking station
Anybody have any pointers on how i can troubleshoot this?
Kind Regards
roniez
-
I just rebooted once more, before i rebuilt the kextcache (even removed battery and removed from powersource)
and just powered up, now the brightness keys works as expected but i do have to press the FN key for it to be used. which is great!
-
added and rebooted but still no go.
do i need to rebuild kextcache? -
-
Yes, and have just double checked as well.
-
They are set exactly like that, still no joy!
[SOLVED] Latitude E6530 High Sierra Upgrade using Clover
in The Archive
Posted
I have now reinstalled the OS using APFS and update Lilu and Lilu.kext & IntelGraphicsFixup but still same KP i belive
If i disable Optimus in Bios, it starts to load the OS then the screen goes completly black and i cannot see anything.
the HDD icon keeps flashing though.
Here is a Video when the KP occurs.
Video of Kernel Panic.