kekkei

I have tested this on macOS 10.14.6 with AR9565 combo Wifi/BT card. The kexts have been developed by itlwm developer zxystd. Background: Last successful method for uploading Atheros 3012 Bluetooth adapter firmware at cold start on a Hackintosh was a closed source kext developed by @EMlyDinEsH which won't work beyond macOS 10.12. In September 2020, zxystd released Ath3kBT and Ath3kBTInjector kexts for uploading firmware and injecting ids for enabling On/Off switch in Bluetooth PrefPane for AR3012 chip in macOS 10.15+. Kexts were recently improved for compatibility with macOS 10.12+. Caveats: Ath3kBTInjector kext has a small defect: if you want to switch Bluetooth On/Off, you 1st need to turn Wi-Fi off. Ath3kBTInjector can be avoided for those who don't mind grayed out bluetooth On/off switch in Bluetooth PrefPane. Download: Github Release Page Tutorial : 1. Download latest version from developer's Github repo. 2. Place Ath3kBT.kext and Ath3kBTInjector.kext in your OpenCore kexts folder. 3. In OpenCore Config.plist, add those two kexts under Kernel->Add along the rest of your other kexts and enable them. Save your modified config afterwards. Note that, in OpenCore Ath3kBTInjector must be loaded after Ath3kBT. This does not apply to Clover. 4. Reboot your Hackintosh. Debug: For debugging, last boot logs can be Inspected with kext id. Sample log for successful upload of firmware under macOS 10.14.6. 2021-04-05 07:04:58.159179+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::probe 2021-04-05 07:04:58.166509+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::probe 2021-04-05 07:04:58.173544+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start! 2021-04-05 07:04:58.180272+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.186809+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: device reset 2021-04-05 07:04:58.193656+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: num configurations 1 2021-04-05 07:04:58.202250+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.208436+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.214628+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.220651+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.226862+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.233100+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:04:58.238779+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start Found Bulk out endpoint! 2021-04-05 07:04:58.245970+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT try to load patch rom file AthrBT_0x31010000.dfu 2021-04-05 07:04:58.305477+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT try to load syscfg file ramps_0x31010000_40.dfu 2021-04-05 07:04:58.314216+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT firmware was already in normal mode 2021-04-05 07:04:58.318405+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT: firmware loaded successfully! 2021-04-05 07:04:58.319098+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::start: device status 3 2021-04-05 07:04:58.326628+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.722502+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.733098+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.733460+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message 2021-04-05 07:05:01.735147+0530 localhost kernel[0]: (Ath3kBT) Ath3kBT::message Source: https://github.com/zxystd/AthBluetoothFirmware/ Credits: zxystd

That's very unstable method ,right ! I think @EMlyDinEsHcan pretty much fix this but seems like he just got invisible at once from long days ...:(

Dear ,you can try doing hot boot to OS X only to support Bluetooth efficiently or via virtual bus to inject bluetooth firmware from Any Linux subsystem in Mac.(Oracle ,VMware etc.) for now until kext for HS is released ....

Thanks again for your major breakthrough Contributions in Hackinstosh Community.Hats off for your sheer interest in Hackintosh even with personal life Difficulties.Keep it up Sir !

I do have ssd on which ,it is installed but it made swapfile on it ,now kernel_task write over 3-4gb in 2hrs ,I deleted and prevented swapfile and now want to configure swapfile on other partition.any help would be appreciated for that .also can you help me configuring my fans ,I see its not running in Mac os

Yeah, its working but move only if you have 6gb+ RAM installed otherwise ,it will freeze at various instances.I open chrome 4-5 tabs and almost all ram occupied.

Dell vostro 3546 Haswell 4400 i3-4005 Kingston SSD MAC OS Version :10.13.3 Working : QE/CI :Fully USB PORTS : All (INCL.USB3.0) Audio Controller :ALC255 Remedy : APPLEALC Layout id: 17except external mic/headset mic/headphone mic Power Management: Using PRSSDTGen.sh WiFi:AR9565 ,works at tx Rate 11mbps max without 5ghz Channels .remedy : customised injector *core capture.kext *core responder.kext *patched Atheros40.kext Bluetooth: OOB //always on BRIGHTNESS CONTROL: Working HDMI:PORT UNAVAILABLE Touchpad/Keyboard: Working Good RehabMan Sir PS2 Controller.kext Sleep:working with powernap disabled through clover.//darkwake=0 **Issues** :Target 1.Implementation of Fan Control Brief: My CPU Fan seems to be not running.Need more investigation. 2.External Mic /Headset mic (combo jack)not working (complex path for amp && needs additional quirks) Needs Investigation.

Please check message.Sir @Jake Lo .I also have three finger swipe gestures for left &right not working.Using RehabmanPS2Controller ,Synaptic Here.

Thanks goodness ,I am so dumb.

Here is the debug file.kp problem solved .only WiFi /brightness not working .I have upgraded from sierra , ,however I have deleted system network preferences. Plists.even using WiFi patches ar9565 ,it shows wifi hardware not found debug_6902.zip

Not working for me ,tried all lilu + ath9k*.kext using ar9565 in 10.13.3.

i am having power management issues unknown cpu kernel panic on boot high sierra 10.13.3

pls elaborate steps for same ,or please attach your configs

Its Rehabman's VoodooPS2Controller.kext (synaptics)

Hi, Jack Lo ,sorry for late reply, I am expecting a power shutdown dialog menu on pressing power button or ctrl+powerbutton. Thanks