jones333333

I am still trying to define with SMbios should be the best with this system, iMac20,1 or Macmini 8,1. It's seems that iMac20,1 is cometlake cpu and Macmini 8,1 cofee lake cpu. As my HP has a comet lake cpu should it be not best to use the iMac20,1 smbios? What advantage should i got when using Macmini 8,1 with my system?

Hervé, I did the changes regarding my Framebuffer and I tried to patch the connector to HDMI 00080000 (tried for con0 and con2 as I didn't know which one is the HDMI ) but still I am unable to use the HDMI out? I suspect that something must be wrong with my config file. May I ask you to have a look please? Thanks in advance! config.plist.zip

Hervé, I changed my SMBIOS to MacMini 8,1. What I just discovered now is that my cpu is recognized as i5 10400t but it is in fact a 10500t. Anyways to fix this?

Thanks for your help Hervé! I will try these settings this evening. Also thanks for your advise for the SMBIOS!

So I am running an HP 400 G6 mini pc with Sonoma, all is working very fine and the only issue that I am still encountering with this system is the HDMI that doesn't work. This system have 2 video output-> DisplayPort et HDMI. The display port is working but I would like to fix the HDMI output. I tried to understand the procedure of Dortania Guide in order to patch the HD 630 but I failed. Could someone help me with this? I put my config file and IOReg extract Thanks in advance for your help!! Archive.zip

I tried this but i am now blocked at this step: it suddenly keep going with the verbose boot and then restart the device, it's going so fast that I didn't had the time to see what the error was. These are the logs of opencore opencore-2024-04-05-090139.zip

helllo to all, I am currently trying to install Ventura on the following device: PC HP ProDesk 400 G6 DM i5 8/256 Go Core i5 10400T Intel Q470 I followed the dortania guide to create my USB installation. I am unable to install Ventura on this system and hope someone could help me with this as I think this mini pc could be a good "mac mini hack" system. At every boot the installer is launching and then sudddenly, the pc is restarted Thanks in advance for your help EFI.zip

Hello to all, My HP X360 1020 G2 is working well under MACOS Sonoma but I sometimes encountering little issues when booting the device (black screen and need to hard reboot) After searching in my ACPI patches logs, it seems that I am encountering some ACPI errors: Could somebody here in the forum could help me to fix these last errors? Thnaks in advance for your help!

Hi Jake Lo, Codec is CX8150 (Connexant) As far as I know, there are 2 layout=id for this codec: 21 and 22 With layout id 21, there is no audio coming from the speakers. Layout 22, I get audio from the laptop speakers but not the four speakers. Indeed, this model (X360 1020 G2) is equiped with a Bang of Olufsen audio system with 4 speakers and I only getting two of them working. I thinks that this is the cause of the low audio volume perception that I got.

I realised that I have in fact 4 speakers on this particular laptop and I think that only 2 of them are working. Maybe this is causing the low audio volume from the speakers. Is anybody here on the forum do have same kind of speaker configuration on hp device which the 4 speakers are working?

UPDATE: I finally updated to Ventura and now the APPLE TV APP is working! Also Youtube is working too! But...I am still encountering issue with low and distorted audio level. I keep searching for a solution but I think that I tried everything... Does anybody have an idea on how this last issue could be fixed please?

I am still investigating my audio issue and I found 2 new issues that are maybe related: - YouTube videos on Safari has a lot of drops in audio and video playback - Videos don't play on Apple TV application. Maybe there is a correlation with these 2 issues and my low audio level.... anyway, I feel that there is something wrong with my configuration. Still investigating.

After some testing I discovered that my audio is completely distorted, it's not only an issue with low audio level. Is there any fix for this issue?

Ok I just discovered that my audio is in fact working... but the sound level is so low that I need to put the volume at maximum to be able to hear something. Is there any fix for this? Thanks in advance for your help!

ok so I removed TbtForcePower.efi and ToggleSipEntry.efi from the Drivers folder and I could get the device to boot. In the meantime, I did some changes to the config.plist (added 2 devices properties) and was able to make the FN keys for brightness level adjustment to work! Now I tried for several hours to make my audio work... Mic input is well recognised and working but I have no audio coming from the speakers. Here is what I get in Hackintool I tried the 2 different layout ID (21 and 22) without any success. I uploaded my last EFI but removed some KEXT (Applealc.kext was also removed) to be able to upload as the size was too big EFI.zip Ho and I forgot my last IOREGX360 MacBook Pro.zip