Jump to content

wellini

Members
  • Posts

    36
  • Joined

  • Last visited

Everything posted by wellini

  1. sorry, if i look in CellPhoneHelper at Sony Ericsson, you find a "deviceDriver" usbcdc.kext. I found it under IOUSBFamily.kext. Here i put also my Device Data in. If i boot with -v and watch the bootstrings, i can see some messages about USBCDCACMData. This is also under IOUSBFamily.kext. i'm not able to see exactly the messages, because they are too fast. is there a way to stop the bootstring or to see what kind of messages that are? Thanks
  2. I change the settings to Sony Ericsson W350 in CellPhoneHelper,, repair Permission and cache, reboot no change,, i checked the driver USBCDC.kext, here also some Modemtyp,, so i put my Data here also, after reboot got a new Mobile device, but no connection possible. I booted with -v and i see some messages for USBCDCACM.DATA , but it is too fast for reading. Is there a way to boot line by line , so i can see what happend? Thanks
  3. Thanks for your help. I found out that the Card is also called Sony Ericsson F3607gw. Here is a WWAN F3507g , maybe that helps a little and I will search .
  4. this is what I did: <key>0x03F0/0x271D HP 2330 Mobile Broadband Module</key> <dict> <key>CFBundleIdentifier</key> <string>com.apple.driver.AppleUSBHostMergeProperties</string> <key>IOClass</key> <string>AppleUSBHostMergeProperties</string> <key>IOProviderClass</key> <string>IOUSBHostDevice</string> <key>IOProviderMergeProperties</key> <dict> <key>DeviceModemOverrides</key> <dict> <key>AccessPointName</key> <string>Obtain From Service Provider</string> <key>Default Personality</key> <string>Sierra GSM Personality</string> <key>ConnectionScript</key> <string>WWAN.ccl</string> <key>DeviceContextID</key> <string>1</string> <key>DeviceModel</key> <string>GSM</string> <key>DeviceVendor</key> <string>Sierra Wireless</string> </dict> <key>DevicePPPOverrides</key> <dict> <key>LCPMTU</key> <integer>1450</integer> </dict> <key>InfoCommands</key> <dict> <key>ATCommands</key> <dict> <key>DirectoryNumber</key> <string>+cnum</string> <key>IMEI</key> <string>+cgsn</string> <key>IMSI</key> <string>+cimi</string> <key>Manufacturer</key> <string>+cgmi</string> <key>Model</key> <string>+cgmm</string> <key>ModemSW</key> <string>+cgmr</string> <key>Serial#</key> <string>+gsn</string> </dict> <key>HiddenProperties</key> <dict> <key>CommandPortBaseName</key> <string>wwan</string> <key>ControlPortBaseName</key> <string>wwanCNTL</string> <key>DataPortBaseName</key> <string>wwan</string> <key>StatusType</key> <string>CellPhoneGSM</string> </dict> </dict> <key>Initializing</key> <true/> <key>InterfaceMapping</key> <dict> <key>2</key> <dict> <key>name</key> <string>wwan</string> </dict> <key>1</key> <dict> <key>name</key> <string>wwanCNTL</string> </dict> </dict> <key>WWAN</key> <true/> </dict> <key>bcdDevice</key> <integer>000</integer> <key>idProduct</key> <integer>10013</integer> <key>idVendor</key> <integer>1008</integer> </dict> and i Pathed the /System/Library/Extensions/IOSerialFamily.kext/Contents/PlugIns/AppleWWANSupport.kext/Contents/Info.plist and AppleWWANSupport1 with my Data.
  5. ok, i understand, but 2 Questions left, if i put a sim card into the slot, the status No Sim changed to lock sim,, how can i unlook? And if i configure the Module and press connect i get the error that there is no Module installed.
  6. Hello, i have a HS2330 WWAN card in my HP2540p. After a lot of reading and patching my Laptop shows the Card as Modem in System Preferences,, in System Report i can see this Card in USB and in WWAN. Also in IOReg i see my WWAN and everything looked correct, but not shown as 3G card. Maybe some has a hint for me. Thanks MacBook Pro.zip
  7. Hello, i successfully installed El Capitan on my E6430 with Enoch Bootloader, but Sound, USB3 and Monitor resolution are not working. Can i use my DSDT and the HDA.kext from Yosemite? Or are there some new Files? Thanks a lot
  8. Hello, this works! Thanks alot,
  9. Hello, i loaded 10.10 to my Dell , all working fine, but i have no Sound, I loaded the HDA.kext from Jake Lo abd set HDAEnabler, but no help. Question: were do i have to load? S/L/E Or E/E i loaded with Kext Wizard and here the Kext is loaded in myhack.kext ?? is that right? Thanks
  10. Hello, my Dell is still working fine, but this morning no more Sound, in Systemstetting , no sound installed. I checked the HDA.kext, but could not find anything wrong. Any hint?
  11. Hi, just finished with your guide, everything is working fine! Thanks alot.
  12. Hello, did you try to boot with -x ? this helps for me.
  13. OK, done,, loaded the Extra Folder . Repair rights reboot,, everything , except Sound ,is working, i think i will stop here, and wait until MyHack will work. Maybee this can help. Again thanks for your help. Klaus
  14. sorry, i don't understand, can you tell me how? thanks
  15. Hi, USB 3 is running with multifail WIFI also, i changed the WIFI card to DW1510. Sound still not working, but that is not a big problem. So i will play now with the System see how it runs. Thanks alot for your great help. Klaus
  16. hi, tired both, but still no Audio and USB 3 only one is working .
  17. Hi, after some investigation, i open a shell and type myfix -t /volumes/OSX. After restart, system comes up normal! Sound and Bluetooth still missing. USB3 sometimes not working. So still some work to do.
  18. Hello Putin, i checked compete Bios,, but i could not found Optimus.
  19. Hello, i was able to install Yosemite with unifail to my Dell, but after reboot System hang. So i copied the complete Extra folder from Mavericks and tried again, but same. If i start with -x System is comming up. i booted with -v -f and you can see the last line. I hope someone can help me. Thanks alot.
  20. Hello, thanks again, everything is working fine now. Thread can be closed. Klaus
  21. me again, System booted fine, but no Sound and no Bluetooth, were do i have to install the modyfied HDA.kext? S/L/E or E/E Thanks
  22. Hello Jake Öo, thanks alot, works fine and System is booting again! Klaus
  23. Hello, i loaded 10.9.1 at my Latitude E6430 with the instruction from Jake Lo, no Problems to load and reboot. but when i upgrated to 10.9.4 the System don't boot. -X is working, i updated like Jake Lo told, use the new HDA and Capi Kext. but no help. Maybe someone of you can help me. Thanks alot Klaus
  24. well i cann't tell you,, but i created also a ML stick with MyHack 3.3.1 with your bootpack and also this stick were not able to load the Software to my Dell. The old Stick was created with 3.1.2 and your bootpack from 2013 is running like a dog! 20min and everything was loaded. I don't know were the difference is between the new Hack and old one! but the old one is working and the new not! So i will keep it !
  25. Heureka,, i found my ML Stick witch i made last year and with this loading and installing was just a peace of cake! So i have now ML back at my Dell. Maybe i try to load Mavericks , but not now, i am glad to have ML back to life. Thanks to all Klaus
×
×
  • Create New...