shinyxxx

Hi, HelloBaker, I have replaced the wifi card from 1820 to 1820A, Please check the clover of mine. Hope it will help you. PS: I am waiting for the touchpad improvement. The honor belongs to Mr Jake Lo! CLOVER_7480_2019-05-28.7z

any progress on 3 fingers gesture?

will you please tell me how to update I2c driver to 2.1.5?

there is one unavailable USB port on the left. Do you have any solution?

but why? I think there must be something I missed

Dear Mr Jake Lo, I did reinstall the system again, but this time I got some issues: system halt while booting or shutting down. Will you help me? debug_27216.zip

Yes! everything is good!

It is very good, the efi you give to me is perfect: it support HDMI and type C nothing to worry about, just touchpad need 3 and more fingers support.

today I tried bluetooth, but there is some issues like interruption, It always connect then stop, then connect again, like that.

I will re-install the system again. and do what you said. hope there is less issues. ------after re-installation, the system goes smoothly, but after installation of karabiner-element, keyboard light can't be changed. here I share my clover folder(7480-6600u). and the other issue is about HDMI. can you share with me some method? CLOVER 14.2 clean.zip

Thank you very much! you help me a lot! It still has the 5 language screen, but no other issues. I have questions on: how to make the thunderbolt 3 and HDMI work? and how to change the key about the backlight? Now I can use F6 to reduce light, but I don't know how to turn up light. Also it needs to be F11 to turn down, and F12 to turn up, can you give me a solution?

the touchpad can work as a mouse, but not recognized as touchpad, I think. battery status works well. I will do the above, later reply.

above is the 5 language screen and debug is sent.

debug file uploaded. debug_18293.zip

I re-installed the Mac OS with your this EFI, and successfully run the system up. cool! but I get a sign as no trachpad. and when start up I get a sign with 5 languages. Could you tell me why?

with this EFI(changed from 7470), I can start mac (I just change back, and it is a good start). with above only panic like the picture. Can you tell what will cause this issue? Or I just try re-install mojave 14.2? CLOVER-7480.zip

you mean it needs a new installation? cause I already installed the mojave, and start well with your 7470efi pack.

there is a reply with -v mode

Hi, friends, I am starting my hackintosh now. the attachment is dsdt and ssdt I got from clove F4, Now I am using 7470EFI started my "Macbook air", but there are issues: 1, touchpad without 2 and more finger support, 2, light control is not work, 3, 1820A wifi is OK, but Bluetooth panic sometimes, 4, thunderbolt 3 and HDMI not work. Please help me! thank you! detail info with my Dell 7480 with: Motherboard: CPU Type DualCore Intel Core i7-6600U, 3400 MHz (34 x 100) Motherboard Name Dell Latitude 7480 Motherboard Chipset Intel Sunrise Point-LP, Intel Skylake-U System Memory 16265 MB (DDR4 SDRAM) DIMM1: Micron 16ATF1G64HZ-2G1B1 8 GB DDR4-2133 DDR4 SDRAM DIMM3: Micron 16ATF1G64HZ-2G1B1 8 GB DDR4-2133 DDR4 SDRAM BIOS Type AMI (10/01/2018) Display: Video Adapter Intel(R) HD Graphics 520 (1 GB) Video Adapter Intel(R) HD Graphics 520 (1 GB) Video Adapter Intel(R) HD Graphics 520 (1 GB) 3D Accelerator Intel HD Graphics 520 Monitor BOEhydis NV14N47 (Dell 6HY1W) [14" LCD] Multimedia: Audio Adapter Intel Skylake HDMI @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1] Audio Adapter Realtek ALC256 @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1] Storage: Disk Drive SDXC Card (119 GB) Disk Drive SM951 NVMe SAMSUNG 512GB Input: Keyboard HID Keyboard Device Keyboard HID Keyboard Device Keyboard HID Keyboard Device Keyboard HID Keyboard Device Keyboard HID Keyboard Device Keyboard PS/2 keyboard Mouse HID-compliant mouse Mouse HID-compliant mouse Mouse HID-compliant mouse Mouse HID-compliant mouse Network: Network Adapter Dell Wireless 1820A 802.11ac origin.zip