Beta1382643440

What you changed will not affect anything... You can only use 3 outputs at a time using the DSDT injection method. To get more working I think you have to use a custom ATY_Init.kext but I am not sure.

The device was missing from the DSDT so all you had to do was create it. So what you would have to do was just paste the injection patch under PCI0 section and change the address to 7... Also I see you now have audio working. DSDT.aml.zip

Yes, just follow the guide.

Audio does not work because you do not have the proper kext installed. You GPU does not work because you are not using GraphicsEnabler=Yes A DSDT is not a fix all...

Here DSDT.aml.zip

For GPU DSDT injection: http://rampagedev.wordpress.com/2012/07 ... dsdt-36-2/

No. Follow my guide here: http://rampagedev.wordpress.com/2012/06 ... -dsdt-3-2/

And what do you want from this? You have to post a Raw DSDT for someone to edit it....

When the installer asks you for the extra folder the installation is complete. I restart then boot into the install using the myHack installer drive then install the extra folder and kext that I want to install. I have had issues with myFix breaking the install in the past. Works fine post install... but the latest version I have had no issues. The boot loader is installed a the root of the drive and it is a hidden file called Boot.

When the installation asks for a extra folder just restart as I do.

I would recommend buying another HDD.

Boot with: DSDT=No Note this is case sensitive Then remove the DSDT

Here is the edited DSDT. I patched the following: Mac Device Names SBUS LPCB Injected GPU Ethernet Built In Fix FN-Keys Power Button Fix And other little patches dsdt.aml.zip

There is no frame buffer loaded which could be the reason it is not working. I f you give me the proper frame buffer I can inject it into your DSDT. Basically the frame buffer gives OS X the card layout and the port that the Internal Display is using is not working....

Basically I list what is needed to boot into the installer and I provide the DSDT. You the boot flags I provide when the boot loader loads by stoping the countdown. Once you do this you should be able to get the installer with no issue.

You must boot with arch=i386 to make your GPU work.

Post your DSDT with IOreg (From IOreg App) For DSDT: http://rampagedev.wordpress.com/2012/06 ... -dsdt-3-2/ For IOreg: http://rampagedev.wordpress.com/2012/07 ... use-ioreg/

Here is my support page for AsRock x79: http://rampagedev.wordpress.com/2012/07 ... dati-gpus/ You must boot with: -v npci=0×2000 cpus=1

Post your DSDT with IOreg (From IOreg App) and I will look into your issue.

What model laptop is this?

I support Gigabyte x79 Motherboards on my blog using the myHack method. Read more here: http://rampagedev.wordpress.com/2012/06/30/all-gigabyte-mainstream-x79-motherboards-dsdt-beta-for-nvidia-and-amdati-gpus/ Now regarding the Kernel Panic... is this before or after installing Mac OS X?

Not sure what is going on since I never patched HPET.... You could try removing AppleHPET.kext from S/L/E but this is not recommended however your system will still run. I will look into it.

What sata controller is it for?

Make sure HPET in the BIOS is enabled.

SSDT looks fine. Place it in your extra folder. Google and download SMC monitor to verify.