Administrators Hervé Posted July 4, 2018 Administrators Share Posted July 4, 2018 I've long updated to A21 and the original patched DSDT/SSDT files still work perfectly. Link to comment Share on other sites More sharing options...
Warmo Posted July 13, 2018 Author Share Posted July 13, 2018 Hi, i'm trying to boot my mackintosh into setup (it finally arived!) although Its not working, i get it saying End Random seed and + signs then it restarts, any ideas? EDIT: Ok ive copied some more files from the pack you guys linked me to, on first boot I get garbled screen with the round cross symbol, second start I get a NVRAM error. I also found out the cmos battery is dead in this laptop so thats another thing I have to order... Link to comment Share on other sites More sharing options...
Warmo Posted July 13, 2018 Author Share Posted July 13, 2018 Ok, after downloading some more stuff and testing I still cant get past this error related to NVRAM or somthing: Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 14, 2018 Moderators Share Posted July 14, 2018 Did you set the BIOS according to this? If setting BIOS still not booting, then please attach Clover folder for review Link to comment Share on other sites More sharing options...
Warmo Posted July 14, 2018 Author Share Posted July 14, 2018 Ok, i changed the BIOS settings again and the OSX installer finally boots, but the trackpad doesn't work but the mouse thing in the middle of the keyboard works After doing the install and using clover again I get this error below: I think I am using the wrong kexts or clovers not configured properly EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 14, 2018 Moderators Share Posted July 14, 2018 Remove OsxAptioFixDrv-64.efi from /EFI/Clover/drivers64UEFI, you already have AptioMemoryFix-64.efi Main issue is your Config.plist is incomplete. Copy the same file from the USB installer. Link to comment Share on other sites More sharing options...
Warmo Posted July 14, 2018 Author Share Posted July 14, 2018 Thanks, but now I've got a error saying Fakesmckeystore: started i used the config from the clover boot pack mentioned earlier Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 14, 2018 Moderators Share Posted July 14, 2018 Can you boot with the USB Installer? At the Clover GUI, select the installed SSD. If you could do that, then copy and replace the entire EFI folder from the USB to the Installed EFI partition. Link to comment Share on other sites More sharing options...
Warmo Posted July 14, 2018 Author Share Posted July 14, 2018 Ok, well after sorting out the aptiofix files and using another usb port ive got it boot and clover works without a usb, horray! BUT, there is still some issues, Ive got no sound,usb ports not working, and some wierd graphical glitches and you need to press hard on the trackpad for it to be recognised by OSX, any ideas please? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 15, 2018 Moderators Share Posted July 15, 2018 Did you copy the kext in /EFI/Clover/kexts/Other/LE to /Library/Extensions Repair permissions and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / Link to comment Share on other sites More sharing options...
Recommended Posts