ender crafters Posted July 17, 2018 Share Posted July 17, 2018 I am trying to install macos with this on a dell precision 5520 and when I boot the macos installer I get a whole bunch of acpi errors a couple seconds after booting and before any kind of gui. Here is a lspci of the dell precision: Controller (x16) (rev 05) 00:02.0 VGA compatible controller: Intel Corporation Device 591b (rev 04) 00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 05) 00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) 00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31) 00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #0 (rev 31) 00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H Serial IO I2C Controller #1 (rev 31) 00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31) 00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31) 00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #1 (rev f1) 00:1c.1 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1) 00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1) 00:1d.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #13 (rev f1) 00:1d.6 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #15 (rev f1) 00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31) 00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31) 00:1f.3 Audio device: Intel Corporation CM238 HD Audio Controller (rev 31) 00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31) 01:00.0 3D controller: NVIDIA Corporation GM107GLM [Quadro M1200 Mobile] (rev a2) 02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32) 03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01) 04:00.0 Non-Volatile memory controller: Toshiba America Info Systems Device 0116 and a lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 158 Model name: Intel(R) Core(TM) i5-7300HQ CPU @ 2.50GHz Stepping: 9 CPU MHz: 900.044 CPU max MHz: 3500.0000 CPU min MHz: 800.0000 BogoMIPS: 4993.00 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 6144K NUMA node0 CPU(s): 0-3 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2018 Moderators Share Posted July 17, 2018 Boot to Clover GUI, press F2 and F4. Now compress and attach the Clover folder here for review and patching Link to comment Share on other sites More sharing options...
ender crafters Posted July 17, 2018 Author Share Posted July 17, 2018 Here it is EFI.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted July 17, 2018 Moderators Share Posted July 17, 2018 Try dropping TableID CpuSsdt Cpu0Ist Link to comment Share on other sites More sharing options...
ender crafters Posted July 17, 2018 Author Share Posted July 17, 2018 I tried that but now I got 26 table load failures instead of 27 Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 17, 2018 Administrators Share Posted July 17, 2018 if you have a modified DSDT try booting without it. at clover GUI press letter O and in ACPI section for bios name select BIOS.aml or type it in depending on how old your clover is. Link to comment Share on other sites More sharing options...
ender crafters Posted July 17, 2018 Author Share Posted July 17, 2018 I am getting the exact same error Link to comment Share on other sites More sharing options...
Allan Posted July 18, 2018 Share Posted July 18, 2018 Uncheck DropOEM Link to comment Share on other sites More sharing options...
ender crafters Posted July 18, 2018 Author Share Posted July 18, 2018 That was not checked to start out with Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 18, 2018 Administrators Share Posted July 18, 2018 can i ask why do you have 39 SSDT tables? and where did they come from? from the picture it looks like it is not using 27 of them. try dropping all of them and booting. maybe then it will boot. Link to comment Share on other sites More sharing options...
Recommended Posts