theandrewgordon Posted December 19, 2018 Share Posted December 19, 2018 Ok I read something about enabling legacy boot, for some reason that worked even though I am booting uefi... last thing listed is wake without backlight.. thanks!! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted December 19, 2018 Moderators Share Posted December 19, 2018 @theandrewgordon Let's move the conversation over here. Since yours is an AIO, it's a little different https://osxlatitude.com/forums/topic/11218-help-optiplex-9020-aio/ Post a new debug file there. Link to comment Share on other sites More sharing options...
Gordo74 Posted January 5, 2019 Share Posted January 5, 2019 Hi All, Thanks for all the hard work on this Bootpack. I updated the BIOS to A22 and set the values as they should be (UEFI Boot as well). I’m having a bit of an issue. I have the installer booting successfully, however, I have an RX 570 8GB that was working fine in my Z77 build with no flags. In this build, when it would normally show the boot screen, it shows only a black screen. Other than that, the system seems to be booting normally. Any ideas with settings I can play with on the bootpack from page 3? I’ve tried deleting Whatevergreen and BCRM fixup (as I’m using a native airport card in a pcie adapter).I have also tried with/without RadeonDeInt in Clover. I've also tried booting with/without Intel graphics enabled. It's a bit maddening because the config seems to be tuned perfectly - it's probably the fastest booting hack I've ever had. Just this last hurdle. Thanks, Mike Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 5, 2019 Moderators Share Posted January 5, 2019 Have you tried selecting inject ATI in Config file and add Whatevergreen back? Link to comment Share on other sites More sharing options...
Gordo74 Posted January 5, 2019 Share Posted January 5, 2019 Hi Jake, Yes, I attempted that as well. Any of the Kext patches that may be interfering? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted January 5, 2019 Moderators Share Posted January 5, 2019 I don't use AMD/ATI card, just the native HD4600. Let's move the conversation over to a new thread with your issue with AMD card. Link to comment Share on other sites More sharing options...
brousseau6933 Posted January 6, 2019 Share Posted January 6, 2019 Gordo74, what's your SMBIOS? iMac 14,1? Do you inject a framebuffer? Link to comment Share on other sites More sharing options...
benniepooh Posted January 6, 2019 Share Posted January 6, 2019 Stuck Installing Mojave. I installed Clover r4813 into the USB, then updated the EFI/clover/kext with Jake's bootpack and updated config.plist. What could this be? This is a 9020 micro, which runs High Sierra without issues except for sleep. Thanks in advance. Link to comment Share on other sites More sharing options...
Gordo74 Posted January 6, 2019 Share Posted January 6, 2019 3 hours ago, brousseau6933 said: What's your SMBIOS? iMac 14,1? Do you inject a framebuffer? It's iMac 15,1 per the Bootpacks config, but I also tried 14,2 because that's what worked on my Z77 build with this card. Link to comment Share on other sites More sharing options...
brousseau6933 Posted January 25, 2019 Share Posted January 25, 2019 Updated to 10.14.3 without any problem... Link to comment Share on other sites More sharing options...
Recommended Posts