sacalos Posted November 20, 2018 Share Posted November 20, 2018 Hi, my hardware specs: Dell Latitude 5580, Bios ver 1.6.4 - Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz (Skylake-U) - Intel HD Graphics 520, (Skylake-U GT2) - Display 1920 x 1080 - 8GBRam, - SATA SSD SanDisk X400 M.2 2280 128GB - Intel Ethernet Connection I219-LM - Atheros/Qualcomm QCA6174 802.11ac Wireless - Clover 4741, UEFI - mac OS 10.12 Sierra on USB disk What is not working: - Ethernet - Keyboard - Track-pad - Audio - WiFi What is working: - Bluetooth - Camera Trying to get Ethernet and other working with no success. Thank you for your help. debug_10421.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted November 20, 2018 Administrators Share Posted November 20, 2018 Atheros/Qualcomm QCA6174 is unsupported. Consult out non-exhaustive inventory of supported cards/USB adapters available in R&D->Wireless section. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2018 Moderators Share Posted November 21, 2018 Config, DSDT, and kexts are mostly wrong. Where did you obtained these files, especially the patched DSDT? You don't even have graphics acceleration. 1 Link to comment Share on other sites More sharing options...
sacalos Posted November 21, 2018 Author Share Posted November 21, 2018 @Jake Lo I followed this guide "DELL LATITUDE / INSPIRON / PRECISION / VOSTRO / XPS - CLOVER GUIDE" and was not successfull in installing the OS. so I've looked around for solutions until I was able to install. Used the beta version of ssdPRGen.sh to generate the SSDT. Also downloaded a patched file from you for another user with Latitude 5580 and probably that's where the DSDT is from? EDIT: Turned on my laptop today and Ethernet is working for the first time. No clue what happened since I have not changed anything. Restarted it and back with no Ethernet. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2018 Moderators Share Posted November 21, 2018 His 5580 probably has Kabylake CPU and yours is Skylake. I'll make some changes and see if it works for you. Give this a try, replace the attached contents into /EFI/Clover and reboot 5580_HD520.zip Link to comment Share on other sites More sharing options...
sacalos Posted November 21, 2018 Author Share Posted November 21, 2018 Thank you @Jake Lo I replaced the contents in clover and rebooted. At boot I was getting " This version of Mac OS X is not sported by this platform" I went back into the config and under SMBIOS i changed from "MacBookPro13,1 - i5-6360U @ 2.00 GHz" to "MacBookPro8,1 - i5-2415M @ 2.30 GHz" and was able to boot. Audio and graphics work but still not Ethernet or keyboard. debug_14841.zip Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2018 Moderators Share Posted November 21, 2018 check BIOS, make sure Legacy Option ROMS is disabled. Check that LAN is enabled Missing IOReg from the debug, please attach Link to comment Share on other sites More sharing options...
sacalos Posted November 21, 2018 Author Share Posted November 21, 2018 Thank you @Jake Lo In BIOS Legacy was enabled so I disabled it. Should I now use switch back to what you had set up in the config "MacBookPro13,1 - i5-6360U @ 2.00 GHz"? Attached is the IOReg file. debug_14841.ioreg Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted November 21, 2018 Moderators Share Posted November 21, 2018 change back to MBP13,1 and add to boot arg -no_compat_check Can you confirm it has a build-in ethernet and what model? I see IntelMausiEthernet.kext and AppleIntelE1000e.kext showing up in the kextcache and getting error. Remove both of them from /S/L/E and /L/E Repair permissions and rebuild cache Link to comment Share on other sites More sharing options...
sacalos Posted November 21, 2018 Author Share Posted November 21, 2018 @Jake Lo The boot arg worked, thank you. Yes, it has a builtin Ethernet (Intel Ethernet Connection I219-LM) I was able to connect this morning but after restart it would not work again. Thank you very much for all your help. Intel Ethernet Connection I219-LM.zip Link to comment Share on other sites More sharing options...
Recommended Posts