catmater Posted February 13, 2019 Share Posted February 13, 2019 Dell Precision Tower 3620 CPU: QuadCore Intel Xeon E3-1245 v5, 3700 MHz (37 x 100) Motherboard: Intel Sunrise Point C236, Intel Skylake-S WS Video: Intel HD Graphics P530 (two DP port and one HDMI) Audio: Realtek ALC899 Network: Intel I219-LM Here is old topic, DELL Precision Tower 3620 - High sierra , work nice. Until i deside upgrade this workstation to Mojave. Аnd jave a problem with video card initialization in whatevergreen kext. with config.plist - have a KP , with config_old.plist - have wrong videocard init - 14mb memory and glith. Where i do mistake ? Please, help. Here is EFI folder T3620-test1.zip As alternative - have second videocard: Nvidia Quadro K620 (disconnect now) - may be this choice better? config_old.plist - wrong videocard init - 14mb memory and glitch. Spoiler config.plist - Kernel panic Spoiler Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 13, 2019 Moderators Share Posted February 13, 2019 on the old config, change ig-platform-id to 0x191B0000 currently it's set to an IvyBridge mobile id, no idea why it has that. on the new config, KP on Skylake FB which means you didn't have the DVMT pre-alloc set. 1 Link to comment Share on other sites More sharing options...
catmater Posted February 13, 2019 Author Share Posted February 13, 2019 DVMT pre-alloc made by watevergreen.kext? Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted February 13, 2019 Moderators Share Posted February 13, 2019 Yes, you could copy the Device /Properties from your 7480 Config but replace AAPL,ig-platform-id ->00001B19 device -> 1B190000 1 Link to comment Share on other sites More sharing options...
catmater Posted February 14, 2019 Author Share Posted February 14, 2019 Great, both of config work! Thank you! Put working config here, when Movave upgrade will be complete. Link to comment Share on other sites More sharing options...
catmater Posted February 14, 2019 Author Share Posted February 14, 2019 Dell Precision Tower 3620 - Mojave 10.14.3 work. CPU: QuadCore Intel Xeon E3-1245 v5, 3700 MHz (37 x 100) Motherboard: Intel Sunrise Point C236, Intel Skylake-S WS Video: Intel HD Graphics P530 (two DP port and one HDMI) Audio: Realtek ALC899 Network: Intel I219-LM Display: 2560 x 1440 Work almost all: CPU stepping, thermosensor, sleep, etc. Video with HDMI/DP output, 2560 x 1440 Sound speaker stereo, loud and quality. Headphones sound in jack. Mic (Siri also work) Ethernet card USB port (all 8 usb) Not working Cardreader Two monitor mode. Very-very grateful for the support to Jake Lo ! You are a man! Here is full working config: dell-t3620-mojave.zip Link to comment Share on other sites More sharing options...
catmater Posted February 14, 2019 Author Share Posted February 14, 2019 @Jake Lo, can you see my ioreg - may be internal tower cardreader can work ? T3620.zip Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 14, 2019 Administrators Share Posted February 14, 2019 Looking at the Precision 3620 specs, I could only see an optional 5.25" 19-in-1 card reader and that's usually connected to an internal USB port on the motherboard. As such, there would be no kext for it and it would either work OOB or not at all. https://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/Dell-Precision-Tower-3000-Series-3620-Spec-Sheet.pdf If you look at your IOReg more closely, you'll see this "USB2.0-CRW" device, removed for some reason only you can explain: Vendor id 0x0bda, Device id 0x0184 -> Realtek RTS5182 card reader If you go through the IOReg info for that device, you should see it appears to be supported under the control of IOUSBHostFamily kext and its associated PlugIns... as long as it remains attached to the USB hub of course... Link to comment Share on other sites More sharing options...
catmater Posted February 14, 2019 Author Share Posted February 14, 2019 Yes, it is internal CardReader, right as you describe. (5.25" 19-in-1 card reader and that's connected to an internal USB port on the motherboard) But i'm do not remove nothing! why hardware are not in use? Link to comment Share on other sites More sharing options...
Administrators Hervé Posted February 14, 2019 Administrators Share Posted February 14, 2019 I guess all your USB ports are not working/not enabled then and you may have to apply the patches to increase USB port numbers. Link to comment Share on other sites More sharing options...
Recommended Posts