Jump to content
PayPal donations: [email protected] ×
Sign in to follow this  
Amaleic

E6230 Catalina 10.15.6 : Freeze after wake up from sleep

Recommended Posts

Hello, guys I have a problem with my Dell Latitude E6230. System freezes after wake up (not always).

Please, check my debug file. And tell me, did i install the system correctly?

I used this instruction, but placed generated ssdt.aml and ssdt.dsl into /EFI/CLOVER/ACPI/patched

 

I'm running Clover r5119

My specs:

- BIOS A20 with SSD set to AHCI mode

- Intel i5-3320M

- 8GB DDR3L-1600 RAM

- no battery

 

Here is the result of pmset -g and ls /var/vm :

 

pmset -g                    
System-wide power settings:
Currently in use:
 standbydelaylow      4200
 standby              1
 womp                 1
 hibernatefile        /var/vm/sleepimage
 powernap             1
 halfdim              1
 networkoversleep     0
 disksleep            10
 standbydelayhigh     4200
 sleep                45
 autopoweroffdelay    259200
 hibernatemode        3
 autopoweroff         1
 ttyskeepawake        1
 displaysleep         45
 highstandbythreshold 50
 lidwake              1
ls -la /var/vm
total 2048
drwxr-xr-x   4 root  wheel      128 Aug 26 17:36 .
drwxr-xr-x  27 root  wheel      864 Aug 25 23:02 ..
-rw-------   1 root  wheel  1048576 Aug 27 04:14 kernelcore
-rw-r--r--   1 root  wheel        0 Aug 25 23:23 sleepimage

 

debug_15858.zip

Share this post


Link to post
Share on other sites

Try and switch to sleep mode only rather than hibernation and delete the sleepimage file. All details are posted in our FAQ section.

  • Thanks 1

Share this post


Link to post
Share on other sites

Thank you very much, Hervé.

It works! 

 

What about my Catalina setup? Have I done everything right? Do i need to update kext files?
And will there be a guide for installing Catalina for my configuration (i5-3320M) ?

Share this post


Link to post
Share on other sites

Yes, you've got everything right and I believe you have the correct generated SSDT table for your CPU. However, you may switch from standard CPU power management with AICPUPM + Clover AICPUPM patch + CPU-specific SSDT to Kernel CPUPM (XCPM) in order to run a totally CPU independant setup; it works on our Ivy Bridge E6230:

  • remove the SSDT files from CLOVER/ACPI/patched subfolder in Clover EFI folder
  • remove the dropping of DMAR + SSDT CpuPm + SSDT Cpu0Ist tables in Clover config (ACPI section)
  • disable AppleIntelCPUPM patch in Clover config (Kernel & Kexts Patches section)
  • enable KernelXCPM + KernelPm patches in Clover config (Kernel & Kexts Patches section)
  • update Clover r5119 but don't go higher (XCPM not working with Clover r5120 and later)
  • Thanks 1

Share this post


Link to post
Share on other sites

Has your freezing on wake issue remained fixed, or has it come back?  I've found that even though I set hibernate mode to 0 (as you probably did as well, given the guide that you linked in your first post), it periodically will change itself back to 3.

Share this post


Link to post
Share on other sites

It only tends to do so after updates. Not in between afaik. It's been known and mentioned for years and it's clearly stated in the FAQ thread.

Share this post


Link to post
Share on other sites

Today my system freezes again after waking up. I have not applied any updates and the hibernation settings remain the same. What could be the reason?

Share this post


Link to post
Share on other sites

You said you have no battery; try and remove the battery manager kext... Or buy a new one.

You may also update FakeSMC (& PlugIns) to Rehabman's last version (v1800) though I doubt it'd have any effect to be honest.

  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...