gorohov Posted May 1, 2021 Share Posted May 1, 2021 hello! can smb give me full big sur OC efi with intel wifi and bt pleeeeeeeease? for setup and boot from disk... i'm noob... i used e7270 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 1, 2021 Moderators Share Posted May 1, 2021 download this and then replace config with the attached and add the extra kexts to kexts folder E7270_IntelWifi:BT.zip Link to comment Share on other sites More sharing options...
gorohov Posted May 1, 2021 Author Share Posted May 1, 2021 thk u, i'l try! Link to comment Share on other sites More sharing options...
gorohov Posted May 1, 2021 Author Share Posted May 1, 2021 well, i take clean OC 6.8, then add and replace everything from archive by link. finaly i add intel kext and replace config once again. setup start, but after first reboot and boot from ssd ctuck on this (in attach). and so in a circle... my EFI folder here Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 1, 2021 Moderators Share Posted May 1, 2021 Go ahead and disable AirportItlwm.kext temporarily until installation is complete. Enable it once you have a running OS. Link to comment Share on other sites More sharing options...
gorohov Posted May 1, 2021 Author Share Posted May 1, 2021 until it worked. I'll try again tomorrow. Link to comment Share on other sites More sharing options...
gorohov Posted May 2, 2021 Author Share Posted May 2, 2021 Hello. it seems I was wrong by not reformatting the disk. formatted, started to install, reboot and everything started. now the installation is going on. but there is one point. ambassadors for opening the configuration and unchecking the checkboxes - the graphical interface in the bootloader disappears. I use opecore configurator UPD: and it works! wifi works great! but bluetooth does not connect anything. and the trackpad does not work. and it gets very hot Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 2, 2021 Moderators Share Posted May 2, 2021 what did you uncheck? If the trackpad does not work, try Rehabman's VoodooPS2Controller instead. Can't help much with your Bluetooth. Maybe wait for new updates on those kexts or replace the whole device with a supported card. Link to comment Share on other sites More sharing options...
Administrators Hervé Posted May 2, 2021 Administrators Share Posted May 2, 2021 Re: trackpad, I experimented with several kexts and my results were as follows: with Dinesh's ApplePS2Controller, all basic features are present but no trackpad in the PrefPane and brightness keys cannot be enabled through the usual DSDT/SSDT patching. with Dr Hurt's last beta/RC VoodooPS2Controller versions that support Alps V7/V8 trackpad, all basic features are present, trackpad is detected and configurable in the PrefPane and brightness keys can be enabled. However, trackpad is dead after wake as reported all those years ago. with Rehabman's last VoodooPS2Controller, all basic features are present t and brightness keys can be enabled but no trackpad in the PrefPane. I opted for the 3rd option. Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted May 2, 2021 Moderators Share Posted May 2, 2021 Have you tried 1Revenger1's Alps version? Link to comment Share on other sites More sharing options...
Recommended Posts