Slice Posted February 6, 2011 Share Posted February 6, 2011 I test IOPCMCIAFamily.kext and it doesn't work at all. Feb 6 12:48:46 MacDell kernel[0]: IOPCCard info: Mac OS X PCMCIA Card Services 3.3.0 Feb 6 12:48:46 MacDell kernel[0]: IOPCCard info: options: [pci] [cardbus] [pnp] Feb 6 12:48:46 MacDell kernel[0]: IOPCCardBridge::getOFConfigurationSettings: failed to configure the machine It's a pity the driver is not finished by Apple so I hope after Chun-Nan corrections it will works as is. But still no hope. My version is more verbose Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::probe Feb 6 12:56:34: --- last message repeated 1 time --- Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::start Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::configure Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: adding bridge mem space 0xa0000000-0xa0ffffff Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c) Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: adding bridge io space 0x100-0x4ff Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c) Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: adding bridge io space 0x800-0x8ff Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c) Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: adding bridge io space 0xc00-0xcff Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c) Feb 6 12:56:34 MacDell kernel[0]: IOPCCardBridge::start failed Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::stop Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::free Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::start Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::configure Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: adding bridge mem space 0xa0000000-0xa0ffffff Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(AdjustResourceInfo, 0x0x12345678, 0x0x2aec3c9c) Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: cs: CardServices(ReportError, 0x0, 0x0x2aec3cb0) Feb 6 12:56:34 MacDell kernel[0]: IOPCCard notice: AdjustResourceInfo: Unknown error code 0xffffffff Feb 6 12:56:34 MacDell kernel[0]: IOPCCardBridge::start failed Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::stop Feb 6 12:56:34 MacDell kernel[0]: IOPCCard debug: IOPCCardBridge::free But also doesn't work. Don't know what is mean AdjustResourceInfo, further investigations needed. Link to comment Share on other sites More sharing options...
Slice Posted February 7, 2011 Author Share Posted February 7, 2011 Now new version of IOPCIFamily. I checked it with Dell Inspiron. No problem, no changes. I'll test with Latitude at evening. Will you be so kind to test it at your computers? Do not forget to clear caches Link to comment Share on other sites More sharing options...
Slice Posted February 9, 2011 Author Share Posted February 9, 2011 After some correction. The version tested on D420. No problem. IOPCIFamily.kext-v265.zip Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 9, 2011 Administrators Share Posted February 9, 2011 Guess it should go in /s/l/e ... saw alot warnings when i added it to /e/e Since i dont have a pc card that works under osx, is there anyway i can see if its working or not ? Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 11, 2011 Administrators Share Posted February 11, 2011 Hi Slice.. will this work in 64bit also can i use this on d620? right now im using chunan's /eurika IOPCMCIAfamily from leo in S/L/E and it works great but no 64 bit support. Link to comment Share on other sites More sharing options...
Slice Posted February 11, 2011 Author Share Posted February 11, 2011 Hi Slice.. will this work in 64bit also can i use this on d620? right now im using chunan's /eurika IOPCMCIAfamily from leo in S/L/E and it works great but no 64 bit support. Yes, Chun-Nan never worked in Snow so all his kexts is 32 bit only. My IOPCIFamily should work in 64 bit. Can't test because Yonah is 32bit only. But I still have no IOPCCardFamily. Neither Tiger version working at my Samsung nor Chun-Nan version from EDP nor fresh compiled version works with my config. The issue is still opened. Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 11, 2011 Administrators Share Posted February 11, 2011 Slice this is the one that i use in S/L/E if you want to try it but like most of theses kexts there's no source code <_ bit>IOPCMCIAFamily.kext.zip Link to comment Share on other sites More sharing options...
Slice Posted February 18, 2011 Author Share Posted February 18, 2011 Slice this is the one that i use in S/L/E if you want to try it but like most of theses kexts there's no source code <_ bit> I have Chun-nan's sources. This kexts also doesn't work for me. Neither Tiger version working at my Samsung nor Chun-Nan version from EDP nor fresh compiled version works with my config. The issue is still opened. Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 18, 2011 Administrators Share Posted February 18, 2011 So the PCMCIA card reader is a different model on D4x0 and D620 ? Link to comment Share on other sites More sharing options...
Slice Posted February 21, 2011 Author Share Posted February 21, 2011 My model is Ricoh R5L476, deviD=0x04761180. What about others? Link to comment Share on other sites More sharing options...
Recommended Posts