Baio77 Posted April 25, 2022 Share Posted April 25, 2022 It is as I thought, the Type C are the TB3 ports so in the ioreg I have to see them, in the last posted ioreg the TB3s are disabled. I have to do a new EFI the TB3s must be activated in Bios. Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 25, 2022 Author Share Posted April 25, 2022 TB3 are set to active in bios Link to comment Share on other sites More sharing options...
Baio77 Posted April 25, 2022 Share Posted April 25, 2022 https://drive.google.com/drive/folders/1OJNZBVTgV0msVZkWzXEe-BLmRvnhKcWX test this efi and Type C , ioreg . let's get the Type C TB3 working. I need to know what model you have of TB3 check with Hackintool the device section and take pictures of the model. From the photos you have 2 TB3 ports Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 25, 2022 Author Share Posted April 25, 2022 Will give a try and update... Need some time. Link to comment Share on other sites More sharing options...
Baio77 Posted April 25, 2022 Share Posted April 25, 2022 I made changes, TB3 should be working now, but sleep \ wake is probably the problem Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 25, 2022 Author Share Posted April 25, 2022 @Baio77 laptop already had Sleep/wake issues Your last efi worked. But there is no device section in hackintool where I can locate TB3 model. And i think type c is not providing enough power to external hard disk in order to work properly... My hackintosh still has so many bugs... Sleep/wake. Safari won't play video which is above 480p if I raise resolution safari hangs until reopening browser. Some more temperature rising up on idle/no load. There must be some more issues. Can't remember... Thank you for your support... Link to comment Share on other sites More sharing options...
Baio77 Posted April 26, 2022 Share Posted April 26, 2022 As usual, there is no ioreg of the last EFI essential to see where we are. Then you have to start solving the operating problems. Problems with Safari are probably solved by adding Kext, but for Sleep \ Wake is more complex I need the original ACPIs extracted from Bios: With Clover bootloader or with EFI Debug. I want to clarify that I DO NOT guarantee the result. Link to comment Share on other sites More sharing options...
Ehshan Amin Posted April 27, 2022 Author Share Posted April 27, 2022 ioreg for your last efi... all I want to atleast fix sleep/wake issue... sleep can work properly only when it is connected to a charger. but on battery if I close lid it shuts my laptop illegally. 27Aprilioreg.ioreg.zip Link to comment Share on other sites More sharing options...
Recommended Posts