Administrators Leon Posted February 15, 2011 Administrators Share Posted February 15, 2011 Hey, SInce you both have D620, how about you compare bios setup.. i think that might be the key... Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 15, 2011 Administrators Share Posted February 15, 2011 what choices did you choose in build when you ran EDPtool.command as for bios it should work with a restore defaults. the only thing bios would prevent is sleep... Link to comment Share on other sites More sharing options...
Isaac Posted February 16, 2011 Author Share Posted February 16, 2011 Sorry, I don't understand... Link to comment Share on other sites More sharing options...
Thund3rbolt Posted February 16, 2011 Share Posted February 16, 2011 Bios Revision? Also make sure your sats is set to ide and not ahci. If that is so and still hanging then boot with -v -x and watch the output to see what it's hanging on. My Dell configuration... Dell Latitude D620 945XM/945GM/DM/GMS/940GML CPU Intel core Duo T2300E @1.66MHz CPU Socker 479mPOA North Bridge Intel i945GM Rev.03 South Bridge Intel 82801GHM(ICH7-M/U) VGA Controller Mobile 945GM/GU Express Intergated Graphics Controller Ethernet Broadcom Nextreme Gigabit Ethernet BCM4310 UART (Wireless thernet Adapter Sound High Definition Audio 82801G Sigmate9205 I follow all your installation steps made a USB install and replace /Extra by ./edptool.command and install your bootloader, booting... and hang in the first page i.e "apple logo" a time circling, and never stop... What's Up? Link to comment Share on other sites More sharing options...
Administrators Leon Posted February 16, 2011 Administrators Share Posted February 16, 2011 i would actually go the other way and use achi.. and not ide Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted February 16, 2011 Administrators Share Posted February 16, 2011 d620 does not have that choice. you might confuse him. Internally it is IDE but with a SATA interface so its not true SATA it's converted from sata to IDE... it's "first generation technology" Link to comment Share on other sites More sharing options...
Recommended Posts