Jump to content

Dell D620 play video, DVD problem


Isaac

Recommended Posts

I follow your step to upgrage the /Extra, and in step 6. appear sh: ./edptool.command: No such file or directory

How can I find the command, please..?

 

Upgrading /Extra...

1. Remove your "/Extra" folder (remember todo a backup)

2. Download the attached extra.zip (yes, from the link above..) and unzip it to /Extra

3. Open up a "Terminal" (Applications/Util.../Terminal)

4. start by typing "sudo su" [ENTER] ... enter your password and hit [ENTER] (yes, without the " ")

5. type: cd /Extra [ENTER]

6. type: ./edptool.command [ENTER]

7. Follow the instructions (READ EVERYTHING)

Link to comment
Share on other sites

  • Replies 25
  • Created
  • Last Reply

Top Posters In This Topic

I download Extra.zip, and unZip it

And remove the Extra folder from /

And copy the unziped Extra folder to /

the use terminal to type the following

 

sh-3.2# sudo su

sh-3.2# cd /Extra

sh-3.2# . /edptool.command

sh: /edptool.command: No such file or directory

sh-3.2# ./edptool.command

sh: ./edptool.command: No such file or directory

sh-3.2# /edptool.command

sh: /edptool.command: No such file or directory

sh-3.2# edptool.command

sh: edptool.command: command not found

sh-3.2# ./edptool.command

sh: ./edptool.command: No such file or directory

sh-3.2#

Link to comment
Share on other sites

I follow you once again...

1. remove the /Extra first

2. Move the Extra.zip to /

3. Double click on the Extra.zip to extract it

 

and then do this

 

sh-3.2# sudo su

sh-3.2# chmod -R 777 /Extra

sh-3.2# cd /Extra

sh-3.2# ./edptool.command

sh: ./edptool.command: No such file or directory

sh-3.2#

Link to comment
Share on other sites

My Dell configuration...

 

Dell Latitude D620

945XM/945GM/DM/GMS/940GML

CPU Intel core Duo T2300E @1.66MHz

CPU Socker 479mPOA

North Bridge Intel i945GM Rev.03

South Bridge Intel 82801GHM(ICH7-M/U)

VGA Controller Mobile 945GM/GU Express Intergated Graphics Controller

Ethernet Broadcom Nextreme Gigabit Ethernet

BCM4310 UART (Wireless thernet Adapter

Sound High Definition Audio 82801G Sigmate9205

 

I follow all your installation steps

made a USB install

and replace /Extra by ./edptool.command

and install your bootloader, booting...

and hang in the first page i.e "apple logo" a time circling, and never stop...

 

What's Up?

Link to comment
Share on other sites


×
×
  • Create New...