Jump to content

Bluetooth of Intel 8260NGW no longer works under Monterey


tryit

Recommended Posts

@Herve, could you please advise?

I'm still running the latest version of Monterey (12.7.6), and I've noticed that Bluetooth no longer works. The Bluetooth toggle can be turned on, but the status always shows Off.

I'm not sure when this started because I rarely use Bluetooth. My Wi-Fi/Bluetooth card is an Intel 8260NGW. I tested it for more than four years, starting with the out-of-the-box Monterey installation following your E7270 guide (I don't remember which Monterey version). Both Wi-Fi and Bluetooth worked flawlessly . I do not remember if I changed and  added kext or  patched

 

In System Report, I see the following:

Bluetooth Controller:

  Address: NULL
  State: Off
  Chipset: BCM_4350C2
  Discoverable: Off
  Firmware Version: v0 c0
  Product ID: 0x0001
  Supported services: 0x382039 < HFP AVRCP A2DP HID Braille AACP GATT Serial >
  Transport: UART

 

I am trying boot with  a fresh downloaded EFI , and have  no luck  too. Thank you

 

Link to comment
Share on other sites

  • Administrators

Hi @tryit, I fear it's going to be much difficult to provide assistance without knowing if Bluetooth stopped working all of a sudden without you making any changes (in which case you could suspect a hardware failure) or after changes you made. In the latter case, only you can provide the necessary info.

 

No EFI, no bootloader config file, ... I've not crystal ball you know...

 

If you see the device in IOReg, it can only be your setup.

Link to comment
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...