Moderators Jake Lo Posted September 20, 2013 Moderators Share Posted September 20, 2013 My Latitude E5530 with full HD screen (1920x1080) and i5 (3320M), 8GB RAM and SSD (250GB) is now on 10.8.5 Ethernet and wireless are working, full graphics accelerated, wireless via a Broadcom card, Bluetooth is not working anymore, sounds is either full or none but buttons work (just the soundlevel does not change). Gert Sounds like you're using VoodooHDA. You need to edit info.plist. Look for the following and change it like this <key>VoodooHDAEnableHalfMicVolumeFix</key> <true/> <key>VoodooHDAEnableHalfVolumeFix</key> <true/> <key>VoodooHDAEnableMuteFix</key> <true/> <key>VoodooHDAEnableVolumeChangeFix</key> <true/> Or try this modded kext if you have IDT 92HD93 sound card like all my E6x30 models. Check your BIOS. Also add this to your DSDT under hdef Method (_DSM, 4, NotSerialized) { Store (Package (0x06) { "hda-gfx", Buffer (0x0A) { "onboard-1" }, "layout-id", Buffer (0x04) { 0x0C, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (Zero) {} }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } Link to comment Share on other sites More sharing options...
macdelld830 Posted September 26, 2013 Author Share Posted September 26, 2013 Thanks guys, I will try these changes next time my work schedule allow it Link to comment Share on other sites More sharing options...
macdelld830 Posted February 3, 2014 Author Share Posted February 3, 2014 Just some feedback to the community. I have my E5530 running under 10.9.1 with a minimal Extra folder en no longer need to inject a string to get the screen to work, thanks to a new Chameleon version. I'm using r2334 (I know we are at r2371 now according to Chameleon wizard). I use following settings: Bootflags: Ignore boot cache (-f). If not, then my mouse no longer seems to work, I use a Logitech Anywhere MX mouse with the unifying USB stub. GUI is selected Timeout: 3 I use a default partition to boot into Windows 7 if I do nothing special Legacy Logo is selected mach_kernel Misc: Ethernet built in is selected Restart Fix is selected no CPU options selected USB: EHCI Acquire fix selected UHCI reset is selected Graphics: Graphics Enabler=yes Skip NVIDIA GFX selected Skip AMD (ATi) GFX selected Intel CAPRI FB selected, value 4 is used (that is the ONLY value working for my 1920 x 1080 screen) Graphics Mode=1920x1080x32 My "SMBios" is set to Macbook Air5,2 I use NO DSDT and NO Chameleon modules. In a next post I will add my Extra folder Link to comment Share on other sites More sharing options...
macdelld830 Posted February 14, 2014 Author Share Posted February 14, 2014 Extra.zip here is the Extra folder Link to comment Share on other sites More sharing options...
macdelld830 Posted February 28, 2014 Author Share Posted February 28, 2014 Updated to 10.9.2 without any special actions. All works as on 10.9.1 Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 3, 2014 Moderators Share Posted March 3, 2014 Updated to 10.9.2 without any special actions. All works as on 10.9.1 Try my patched AppleHDA here. Created my very first patched AppleHDA with hints from pokenguyen. Tested on E6430, should work on all Exx30 models with 92HD93xx. Tested to work: Internal speaker Headphone / autoswitch Internal Mic HDMI audio Link to comment Share on other sites More sharing options...
macdelld830 Posted March 13, 2014 Author Share Posted March 13, 2014 Hi Jake, works perfectly with the buttons. I have not tested the microphone, HDMI or headphone, but that will probably be OK. I will confirm later. This is already far better then the VoodooHDA which had 1 possibel action: on or off. I also updated the Broadcom kext for the builtin in BCM5761. New Extra is attached. So, with this setup I have following I5 at 2.6GHz 8GB RAM SSD of 250 GB (a Samsung 840 Pro series) Screen is at 1920 x 1080 and is fully accelerated Battery is working, indicator as well Internet Ethernet cards (bcm5761) is running Wireless card is a third party mini card I pulled from my older Dell (capable of 802.11 a/b/g) What is NOT working (yet): HDMI out for the screen is NOT working (so audio via HDMI is also probably not working yet) USB3 ports are not working with USB3 devices, they do work with USB2 devices Not tested yet DVD playing (DVD player is detected properly) Audio via headphones Internal microphone I'm using the latest Chameleon boot loader (r2377). My screen only works is I use the "Intel CAPRI FB = 4" key and "Graphics Enabler = YES". My machine does have HDMI out and VGA out, but does do not work under OSX. I can use them under Windows 7 without problems, but mirrored and as extended displays. Link to comment Share on other sites More sharing options...
macdelld830 Posted March 13, 2014 Author Share Posted March 13, 2014 Here is my new Extra folder Extra.zip Link to comment Share on other sites More sharing options...
macdelld830 Posted March 13, 2014 Author Share Posted March 13, 2014 And internal microphone also works in Garageband, yeah thank you Jake Lo !!! Link to comment Share on other sites More sharing options...
Moderators Jake Lo Posted March 13, 2014 Moderators Share Posted March 13, 2014 Here is my new Extra folder Looking at your boot pack, GenericUSBXHCI is outside of Extensions, perhaps that why your USB 3.0 devices is not working. Also looks like you don't have multi-touch for touchpad/trackstick working, no power management. You need a patched DSDT to get HDMI video/audio working. Have you tried using the DSDT from the E6430 guide? You should leave out the EDP and include folder when you upload boot packs. Link to comment Share on other sites More sharing options...
Recommended Posts